// Not enough storage is available to process this command.
//
#define ERROR_NOT_ENOUGH_MEMORY 8L // dderror
//
// MessageId: ERROR_INVALID_BLOCK
//
// MessageText:
//
// The storage control block address is invalid.
//
#define ERROR_INVALID_BLOCK 9L
//
// MessageId: ERROR_BAD_ENVIRONMENT
//
// MessageText:
//
// The environment is incorrect.
//
#define ERROR_BAD_ENVIRONMENT 10L
//
// MessageId: ERROR_BAD_FORMAT
//
// MessageText:
//
// An attempt was made to load a program with an incorrect format.
//
#define ERROR_BAD_FORMAT 11L
//
// MessageId: ERROR_INVALID_ACCESS
//
// MessageText:
//
// The access code is invalid.
//
#define ERROR_INVALID_ACCESS 12L
//
// MessageId: ERROR_INVALID_DATA
//
// MessageText:
//
// The data is invalid.
//
#define ERROR_INVALID_DATA 13L
//
// MessageId: ERROR_OUTOFMEMORY
//
// MessageText:
//
// Not enough storage is available to complete this operation.
//
#define ERROR_OUTOFMEMORY 14L
//
// MessageId: ERROR_INVALID_DRIVE
//
// MessageText:
//
// The system cannot find the drive specified.
//
#define ERROR_INVALID_DRIVE 15L
//
// MessageId: ERROR_CURRENT_DIRECTORY
//
// MessageText:
//
// The directory cannot be removed.
//
#define ERROR_CURRENT_DIRECTORY 16L
//
// MessageId: ERROR_NOT_SAME_DEVICE
//
// MessageText:
//
// The system cannot move the file to a different disk drive.
//
#define ERROR_NOT_SAME_DEVICE 17L
//
// MessageId: ERROR_NO_MORE_FILES
//
// MessageText:
//
// There are no more files.
//
#define ERROR_NO_MORE_FILES 18L
//
// MessageId: ERROR_WRITE_PROTECT
//
// MessageText:
//
// The media is write protected.
//
#define ERROR_WRITE_PROTECT 19L
//
// MessageId: ERROR_BAD_UNIT
//
// MessageText:
//
// The system cannot find the device specified.
//
#define ERROR_BAD_UNIT 20L
//
// MessageId: ERROR_NOT_READY
//
// MessageText:
//
// The device is not ready.
//
#define ERROR_NOT_READY 21L
//
// MessageId: ERROR_BAD_COMMAND
//
// MessageText:
//
// The device does not recognize the command.
//
#define ERROR_BAD_COMMAND 22L
//
// MessageId: ERROR_CRC
//
// MessageText:
//
// Data error (cyclic redundancy check).
//
#define ERROR_CRC 23L
//
// MessageId: ERROR_BAD_LENGTH
//
// MessageText:
//
// The program issued a command but the command length is incorrect.
//
#define ERROR_BAD_LENGTH 24L
//
// MessageId: ERROR_SEEK
//
// MessageText:
//
// The drive cannot locate a specific area or track on the disk.
//
#define ERROR_SEEK 25L
//
// MessageId: ERROR_NOT_DOS_DISK
//
// MessageText:
//
// The specified disk or diskette cannot be accessed.
//
#define ERROR_NOT_DOS_DISK 26L
//
// MessageId: ERROR_SECTOR_NOT_FOUND
//
// MessageText:
//
// The drive cannot find the sector requested.
//
#define ERROR_SECTOR_NOT_FOUND 27L
//
// MessageId: ERROR_OUT_OF_PAPER
//
// MessageText:
//
// The printer is out of paper.
//
#define ERROR_OUT_OF_PAPER 28L
//
// MessageId: ERROR_WRITE_FAULT
//
// MessageText:
//
// The system cannot write to the specified device.
//
#define ERROR_WRITE_FAULT 29L
//
// MessageId: ERROR_READ_FAULT
//
// MessageText:
//
// The system cannot read from the specified device.
//
#define ERROR_READ_FAULT 30L
//
// MessageId: ERROR_GEN_FAILURE
//
// MessageText:
//
// A device attached to the system is not functioning.
//
#define ERROR_GEN_FAILURE 31L
//
// MessageId: ERROR_SHARING_VIOLATION
//
// MessageText:
//
// The process cannot access the file because it is being used by another process.
//
#define ERROR_SHARING_VIOLATION 32L
//
// MessageId: ERROR_LOCK_VIOLATION
//
// MessageText:
//
// The process cannot access the file because another process has locked a portion of the file.
//
#define ERROR_LOCK_VIOLATION 33L
//
// MessageId: ERROR_WRONG_DISK
//
// MessageText:
//
// The wrong diskette is in the drive.
// Insert %2 (Volume Serial Number: %3) into drive %1.
//
#define ERROR_WRONG_DISK 34L
//
// MessageId: ERROR_SHARING_BUFFER_EXCEEDED
//
// MessageText:
//
// Too many files opened for sharing.
//
#define ERROR_SHARING_BUFFER_EXCEEDED 36L
//
// MessageId: ERROR_HANDLE_EOF
//
// MessageText:
//
// Reached the end of the file.
//
#define ERROR_HANDLE_EOF 38L
//
// MessageId: ERROR_HANDLE_DISK_FULL
//
// MessageText:
//
// The disk is full.
//
#define ERROR_HANDLE_DISK_FULL 39L
//
// MessageId: ERROR_NOT_SUPPORTED
//
// MessageText:
//
// The request is not supported.
//
#define ERROR_NOT_SUPPORTED 50L
//
// MessageId: ERROR_REM_NOT_LIST
//
// MessageText:
//
// Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
//
#define ERROR_REM_NOT_LIST 51L
//
// MessageId: ERROR_DUP_NAME
//
// MessageText:
//
// You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again.
//
#define ERROR_DUP_NAME 52L
//
// MessageId: ERROR_BAD_NETPATH
//
// MessageText:
//
// The network path was not found.
//
#define ERROR_BAD_NETPATH 53L
//
// MessageId: ERROR_NETWORK_BUSY
//
// MessageText:
//
// The network is busy.
//
#define ERROR_NETWORK_BUSY 54L
//
// MessageId: ERROR_DEV_NOT_EXIST
//
// MessageText:
//
// The specified network resource or device is no longer available.
//
#define ERROR_DEV_NOT_EXIST 55L // dderror
//
// MessageId: ERROR_TOO_MANY_CMDS
//
// MessageText:
//
// The network BIOS command limit has been reached.
//
#define ERROR_TOO_MANY_CMDS 56L
//
// MessageId: ERROR_ADAP_HDW_ERR
//
// MessageText:
//
// A network adapter hardware error occurred.
//
#define ERROR_ADAP_HDW_ERR 57L
//
// MessageId: ERROR_BAD_NET_RESP
//
// MessageText:
//
// The specified server cannot perform the requested operation.
//
#define ERROR_BAD_NET_RESP 58L
//
// MessageId: ERROR_UNEXP_NET_ERR
//
// MessageText:
//
// An unexpected network error occurred.
//
#define ERROR_UNEXP_NET_ERR 59L
//
// MessageId: ERROR_BAD_REM_ADAP
//
// MessageText:
//
// The remote adapter is not compatible.
//
#define ERROR_BAD_REM_ADAP 60L
//
// MessageId: ERROR_PRINTQ_FULL
//
// MessageText:
//
// The printer queue is full.
//
#define ERROR_PRINTQ_FULL 61L
//
// MessageId: ERROR_NO_SPOOL_SPACE
//
// MessageText:
//
// Space to store the file waiting to be printed is not available on the server.
//
#define ERROR_NO_SPOOL_SPACE 62L
//
// MessageId: ERROR_PRINT_CANCELLED
//
// MessageText:
//
// Your file waiting to be printed was deleted.
//
#define ERROR_PRINT_CANCELLED 63L
//
// MessageId: ERROR_NETNAME_DELETED
//
// MessageText:
//
// The specified network name is no longer available.
//
#define ERROR_NETNAME_DELETED 64L
//
// MessageId: ERROR_NETWORK_ACCESS_DENIED
//
// MessageText:
//
// Network access is denied.
//
#define ERROR_NETWORK_ACCESS_DENIED 65L
//
// MessageId: ERROR_BAD_DEV_TYPE
//
// MessageText:
//
// The network resource type is not correct.
//
#define ERROR_BAD_DEV_TYPE 66L
//
// MessageId: ERROR_BAD_NET_NAME
//
// MessageText:
//
// The network name cannot be found.
//
#define ERROR_BAD_NET_NAME 67L
//
// MessageId: ERROR_TOO_MANY_NAMES
//
// MessageText:
//
// The name limit for the local computer network adapter card was exceeded.
//
#define ERROR_TOO_MANY_NAMES 68L
//
// MessageId: ERROR_TOO_MANY_SESS
//
// MessageText:
//
// The network BIOS session limit was exceeded.
//
#define ERROR_TOO_MANY_SESS 69L
//
// MessageId: ERROR_SHARING_PAUSED
//
// MessageText:
//
// The remote server has been paused or is in the process of being started.
//
#define ERROR_SHARING_PAUSED 70L
//
// MessageId: ERROR_REQ_NOT_ACCEP
//
// MessageText:
//
// No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
//
#define ERROR_REQ_NOT_ACCEP 71L
//
// MessageId: ERROR_REDIR_PAUSED
//
// MessageText:
//
// The specified printer or disk device has been paused.
//
#define ERROR_REDIR_PAUSED 72L
//
// MessageId: ERROR_FILE_EXISTS
//
// MessageText:
//
// The file exists.
//
#define ERROR_FILE_EXISTS 80L
//
// MessageId: ERROR_CANNOT_MAKE
//
// MessageText:
//
// The directory or file cannot be created.
//
#define ERROR_CANNOT_MAKE 82L
//
// MessageId: ERROR_FAIL_I24
//
// MessageText:
//
// Fail on INT 24.
//
#define ERROR_FAIL_I24 83L
//
// MessageId: ERROR_OUT_OF_STRUCTURES
//
// MessageText:
//
// Storage to process this request is not available.
//
#define ERROR_OUT_OF_STRUCTURES 84L
//
// MessageId: ERROR_ALREADY_ASSIGNED
//
// MessageText:
//
// The local device name is already in use.
//
#define ERROR_ALREADY_ASSIGNED 85L
//
// MessageId: ERROR_INVALID_PASSWORD
//
// MessageText:
//
// The specified network password is not correct.
//
#define ERROR_INVALID_PASSWORD 86L
//
// MessageId: ERROR_INVALID_PARAMETER
//
// MessageText:
//
// The parameter is incorrect.
//
#define ERROR_INVALID_PARAMETER 87L // dderror
//
// MessageId: ERROR_NET_WRITE_FAULT
//
// MessageText:
//
// A write fault occurred on the network.
//
#define ERROR_NET_WRITE_FAULT 88L
//
// MessageId: ERROR_NO_PROC_SLOTS
//
// MessageText:
//
// The system cannot start another process at this time.
//
#define ERROR_NO_PROC_SLOTS 89L
//
// MessageId: ERROR_TOO_MANY_SEMAPHORES
//
// MessageText:
//
// Cannot create another system semaphore.
//
#define ERROR_TOO_MANY_SEMAPHORES 100L
//
// MessageId: ERROR_EXCL_SEM_ALREADY_OWNED
//
// MessageText:
//
// The exclusive semaphore is owned by another process.
//
#define ERROR_EXCL_SEM_ALREADY_OWNED 101L
//
// MessageId: ERROR_SEM_IS_SET
//
// MessageText:
//
// The semaphore is set and cannot be closed.
//
#define ERROR_SEM_IS_SET 102L
//
// MessageId: ERROR_TOO_MANY_SEM_REQUESTS
//
// MessageText:
//
// The semaphore cannot be set again.
//
#define ERROR_TOO_MANY_SEM_REQUESTS 103L
//
// MessageId: ERROR_INVALID_AT_INTERRUPT_TIME
//
// MessageText:
//
// Cannot request exclusive semaphores at interrupt time.
//
#define ERROR_INVALID_AT_INTERRUPT_TIME 104L
//
// MessageId: ERROR_SEM_OWNER_DIED
//
// MessageText:
//
// The previous ownership of this semaphore has ended.
//
#define ERROR_SEM_OWNER_DIED 105L
//
// MessageId: ERROR_SEM_USER_LIMIT
//
// MessageText:
//
// Insert the diskette for drive %1.
//
#define ERROR_SEM_USER_LIMIT 106L
//
// MessageId: ERROR_DISK_CHANGE
//
// MessageText:
//
// The program stopped because an alternate diskette was not inserted.
//
#define ERROR_DISK_CHANGE 107L
//
// MessageId: ERROR_DRIVE_LOCKED
//
// MessageText:
//
// The disk is in use or locked by another process.
//
#define ERROR_DRIVE_LOCKED 108L
//
// MessageId: ERROR_BROKEN_PIPE
//
// MessageText:
//
// The pipe has been ended.
//
#define ERROR_BROKEN_PIPE 109L
//
// MessageId: ERROR_OPEN_FAILED
//
// MessageText:
//
// The system cannot open the device or file specified.
//
#define ERROR_OPEN_FAILED 110L
//
// MessageId: ERROR_BUFFER_OVERFLOW
//
// MessageText:
//
// The file name is too long.
//
#define ERROR_BUFFER_OVERFLOW 111L
//
// MessageId: ERROR_DISK_FULL
//
// MessageText:
//
// There is not enough space on the disk.
//
#define ERROR_DISK_FULL 112L
//
// MessageId: ERROR_NO_MORE_SEARCH_HANDLES
//
// MessageText:
//
// No more internal file identifiers available.
//
#define ERROR_NO_MORE_SEARCH_HANDLES 113L
//
// MessageId: ERROR_INVALID_TARGET_HANDLE
//
// MessageText:
//
// The target internal file identifier is incorrect.
//
#define ERROR_INVALID_TARGET_HANDLE 114L
//
// MessageId: ERROR_INVALID_CATEGORY
//
// MessageText:
//
// The IOCTL call made by the application program is not correct.
//
#define ERROR_INVALID_CATEGORY 117L
//
// MessageId: ERROR_INVALID_VERIFY_SWITCH
//
// MessageText:
//
// The verify-on-write switch parameter value is not correct.
//
#define ERROR_INVALID_VERIFY_SWITCH 118L
//
// MessageId: ERROR_BAD_DRIVER_LEVEL
//
// MessageText:
//
// The system does not support the command requested.
//
#define ERROR_BAD_DRIVER_LEVEL 119L
//
// MessageId: ERROR_CALL_NOT_IMPLEMENTED
//
// MessageText:
//
// This function is not supported on this system.
//
#define ERROR_CALL_NOT_IMPLEMENTED 120L
//
// MessageId: ERROR_SEM_TIMEOUT
//
// MessageText:
//
// The semaphore timeout period has expired.
//
#define ERROR_SEM_TIMEOUT 121L
//
// MessageId: ERROR_INSUFFICIENT_BUFFER
//
// MessageText:
//
// The data area passed to a system call is too small.
//
#define ERROR_INSUFFICIENT_BUFFER 122L // dderror
//
// MessageId: ERROR_INVALID_NAME
//
// MessageText:
//
// The filename, directory name, or volume label syntax is incorrect.
//
#define ERROR_INVALID_NAME 123L // dderror
//
// MessageId: ERROR_INVALID_LEVEL
//
// MessageText:
//
// The system call level is not correct.
//
#define ERROR_INVALID_LEVEL 124L
//
// MessageId: ERROR_NO_VOLUME_LABEL
//
// MessageText:
//
// The disk has no volume label.
//
#define ERROR_NO_VOLUME_LABEL 125L
//
// MessageId: ERROR_MOD_NOT_FOUND
//
// MessageText:
//
// The specified module could not be found.
//
#define ERROR_MOD_NOT_FOUND 126L
//
// MessageId: ERROR_PROC_NOT_FOUND
//
// MessageText:
//
// The specified procedure could not be found.
//
#define ERROR_PROC_NOT_FOUND 127L
//
// MessageId: ERROR_WAIT_NO_CHILDREN
//
// MessageText:
//
// There are no child processes to wait for.
//
#define ERROR_WAIT_NO_CHILDREN 128L
//
// MessageId: ERROR_CHILD_NOT_COMPLETE
//
// MessageText:
//
// The %1 application cannot be run in Win32 mode.
//
#define ERROR_CHILD_NOT_COMPLETE 129L
//
// MessageId: ERROR_DIRECT_ACCESS_HANDLE
//
// MessageText:
//
// Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
//
#define ERROR_DIRECT_ACCESS_HANDLE 130L
//
// MessageId: ERROR_NEGATIVE_SEEK
//
// MessageText:
//
// An attempt was made to move the file pointer before the beginning of the file.
//
#define ERROR_NEGATIVE_SEEK 131L
//
// MessageId: ERROR_SEEK_ON_DEVICE
//
// MessageText:
//
// The file pointer cannot be set on the specified device or file.
//
#define ERROR_SEEK_ON_DEVICE 132L
//
// MessageId: ERROR_IS_JOIN_TARGET
//
// MessageText:
//
// A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
//
#define ERROR_IS_JOIN_TARGET 133L
//
// MessageId: ERROR_IS_JOINED
//
// MessageText:
//
// An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
//
#define ERROR_IS_JOINED 134L
//
// MessageId: ERROR_IS_SUBSTED
//
// MessageText:
//
// An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
//
#define ERROR_IS_SUBSTED 135L
//
// MessageId: ERROR_NOT_JOINED
//
// MessageText:
//
// The system tried to delete the JOIN of a drive that is not joined.
//
#define ERROR_NOT_JOINED 136L
//
// MessageId: ERROR_NOT_SUBSTED
//
// MessageText:
//
// The system tried to delete the substitution of a drive that is not substituted.
//
#define ERROR_NOT_SUBSTED 137L
//
// MessageId: ERROR_JOIN_TO_JOIN
//
// MessageText:
//
// The system tried to join a drive to a directory on a joined drive.
//
#define ERROR_JOIN_TO_JOIN 138L
//
// MessageId: ERROR_SUBST_TO_SUBST
//
// MessageText:
//
// The system tried to substitute a drive to a directory on a substituted drive.
//
#define ERROR_SUBST_TO_SUBST 139L
//
// MessageId: ERROR_JOIN_TO_SUBST
//
// MessageText:
//
// The system tried to join a drive to a directory on a substituted drive.
//
#define ERROR_JOIN_TO_SUBST 140L
//
// MessageId: ERROR_SUBST_TO_JOIN
//
// MessageText:
//
// The system tried to SUBST a drive to a directory on a joined drive.
//
#define ERROR_SUBST_TO_JOIN 141L
//
// MessageId: ERROR_BUSY_DRIVE
//
// MessageText:
//
// The system cannot perform a JOIN or SUBST at this time.
//
#define ERROR_BUSY_DRIVE 142L
//
// MessageId: ERROR_SAME_DRIVE
//
// MessageText:
//
// The system cannot join or substitute a drive to or for a directory on the same drive.
//
#define ERROR_SAME_DRIVE 143L
//
// MessageId: ERROR_DIR_NOT_ROOT
//
// MessageText:
//
// The directory is not a subdirectory of the root directory.
//
#define ERROR_DIR_NOT_ROOT 144L
//
// MessageId: ERROR_DIR_NOT_EMPTY
//
// MessageText:
//
// The directory is not empty.
//
#define ERROR_DIR_NOT_EMPTY 145L
//
// MessageId: ERROR_IS_SUBST_PATH
//
// MessageText:
//
// The path specified is being used in a substitute.
//
#define ERROR_IS_SUBST_PATH 146L
//
// MessageId: ERROR_IS_JOIN_PATH
//
// MessageText:
//
// Not enough resources are available to process this command.
//
#define ERROR_IS_JOIN_PATH 147L
//
// MessageId: ERROR_PATH_BUSY
//
// MessageText:
//
// The path specified cannot be used at this time.
//
#define ERROR_PATH_BUSY 148L
//
// MessageId: ERROR_IS_SUBST_TARGET
//
// MessageText:
//
// An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
//
#define ERROR_IS_SUBST_TARGET 149L
//
// MessageId: ERROR_SYSTEM_TRACE
//
// MessageText:
//
// System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
//
#define ERROR_SYSTEM_TRACE 150L
//
// MessageId: ERROR_INVALID_EVENT_COUNT
//
// MessageText:
//
// The number of specified semaphore events for DosMuxSemWait is not correct.
//
#define ERROR_INVALID_EVENT_COUNT 151L
//
// MessageId: ERROR_TOO_MANY_MUXWAITERS
//
// MessageText:
//
// DosMuxSemWait did not execute; too many semaphores are already set.
//
#define ERROR_TOO_MANY_MUXWAITERS 152L
//
// MessageId: ERROR_INVALID_LIST_FORMAT
//
// MessageText:
//
// The DosMuxSemWait list is not correct.
//
#define ERROR_INVALID_LIST_FORMAT 153L
//
// MessageId: ERROR_LABEL_TOO_LONG
//
// MessageText:
//
// The volume label you entered exceeds the label character limit of the target file system.
//
#define ERROR_LABEL_TOO_LONG 154L
//
// MessageId: ERROR_TOO_MANY_TCBS
//
// MessageText:
//
// Cannot create another thread.
//
#define ERROR_TOO_MANY_TCBS 155L
//
// MessageId: ERROR_SIGNAL_REFUSED
//
// MessageText:
//
// The recipient process has refused the signal.
//
#define ERROR_SIGNAL_REFUSED 156L
//
// MessageId: ERROR_DISCARDED
//
// MessageText:
//
// The segment is already discarded and cannot be locked.
//
#define ERROR_DISCARDED 157L
//
// MessageId: ERROR_NOT_LOCKED
//
// MessageText:
//
// The segment is already unlocked.
//
#define ERROR_NOT_LOCKED 158L
//
// MessageId: ERROR_BAD_THREADID_ADDR
//
// MessageText:
//
// The address for the thread ID is not correct.
//
#define ERROR_BAD_THREADID_ADDR 159L
//
// MessageId: ERROR_BAD_ARGUMENTS
//
// MessageText:
//
// One or more arguments are not correct.
//
#define ERROR_BAD_ARGUMENTS 160L
//
// MessageId: ERROR_BAD_PATHNAME
//
// MessageText:
//
// The specified path is invalid.
//
#define ERROR_BAD_PATHNAME 161L
//
// MessageId: ERROR_SIGNAL_PENDING
//
// MessageText:
//
// A signal is already pending.
//
#define ERROR_SIGNAL_PENDING 162L
//
// MessageId: ERROR_MAX_THRDS_REACHED
//
// MessageText:
//
// No more threads can be created in the system.
//
#define ERROR_MAX_THRDS_REACHED 164L
//
// MessageId: ERROR_LOCK_FAILED
//
// MessageText:
//
// Unable to lock a region of a file.
//
#define ERROR_LOCK_FAILED 167L
//
// MessageId: ERROR_BUSY
//
// MessageText:
//
// The requested resource is in use.
//
#define ERROR_BUSY 170L // dderror
//
// MessageId: ERROR_CANCEL_VIOLATION
//
// MessageText:
//
// A lock request was not outstanding for the supplied cancel region.
//
#define ERROR_CANCEL_VIOLATION 173L
//
// MessageId: ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
//
// MessageText:
//
// The file system does not support atomic changes to the lock type.
//
#define ERROR_ATOMIC_LOCKS_NOT_SUPPORTED 174L
//
// MessageId: ERROR_INVALID_SEGMENT_NUMBER
//
// MessageText:
//
// The system detected a segment number that was not correct.
//
#define ERROR_INVALID_SEGMENT_NUMBER 180L
//
// MessageId: ERROR_INVALID_ORDINAL
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_INVALID_ORDINAL 182L
//
// MessageId: ERROR_ALREADY_EXISTS
//
// MessageText:
//
// Cannot create a file when that file already exists.
//
#define ERROR_ALREADY_EXISTS 183L
//
// MessageId: ERROR_INVALID_FLAG_NUMBER
//
// MessageText:
//
// The flag passed is not correct.
//
#define ERROR_INVALID_FLAG_NUMBER 186L
//
// MessageId: ERROR_SEM_NOT_FOUND
//
// MessageText:
//
// The specified system semaphore name was not found.
//
#define ERROR_SEM_NOT_FOUND 187L
//
// MessageId: ERROR_INVALID_STARTING_CODESEG
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_INVALID_STARTING_CODESEG 188L
//
// MessageId: ERROR_INVALID_STACKSEG
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_INVALID_STACKSEG 189L
//
// MessageId: ERROR_INVALID_MODULETYPE
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_INVALID_MODULETYPE 190L
//
// MessageId: ERROR_INVALID_EXE_SIGNATURE
//
// MessageText:
//
// Cannot run %1 in Win32 mode.
//
#define ERROR_INVALID_EXE_SIGNATURE 191L
//
// MessageId: ERROR_EXE_MARKED_INVALID
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_EXE_MARKED_INVALID 192L
//
// MessageId: ERROR_BAD_EXE_FORMAT
//
// MessageText:
//
// %1 is not a valid Win32 application.
//
#define ERROR_BAD_EXE_FORMAT 193L
//
// MessageId: ERROR_ITERATED_DATA_EXCEEDS_64k
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_ITERATED_DATA_EXCEEDS_64k 194L
//
// MessageId: ERROR_INVALID_MINALLOCSIZE
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_INVALID_MINALLOCSIZE 195L
//
// MessageId: ERROR_DYNLINK_FROM_INVALID_RING
//
// MessageText:
//
// The operating system cannot run this application program.
//
#define ERROR_DYNLINK_FROM_INVALID_RING 196L
//
// MessageId: ERROR_IOPL_NOT_ENABLED
//
// MessageText:
//
// The operating system is not presently configured to run this application.
//
#define ERROR_IOPL_NOT_ENABLED 197L
//
// MessageId: ERROR_INVALID_SEGDPL
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_INVALID_SEGDPL 198L
//
// MessageId: ERROR_AUTODATASEG_EXCEEDS_64k
//
// MessageText:
//
// The operating system cannot run this application program.
//
#define ERROR_AUTODATASEG_EXCEEDS_64k 199L
//
// MessageId: ERROR_RING2SEG_MUST_BE_MOVABLE
//
// MessageText:
//
// The code segment cannot be greater than or equal to 64K.
//
#define ERROR_RING2SEG_MUST_BE_MOVABLE 200L
//
// MessageId: ERROR_RELOC_CHAIN_XEEDS_SEGLIM
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_RELOC_CHAIN_XEEDS_SEGLIM 201L
//
// MessageId: ERROR_INFLOOP_IN_RELOC_CHAIN
//
// MessageText:
//
// The operating system cannot run %1.
//
#define ERROR_INFLOOP_IN_RELOC_CHAIN 202L
//
// MessageId: ERROR_ENVVAR_NOT_FOUND
//
// MessageText:
//
// The system could not find the environment option that was entered.
//
#define ERROR_ENVVAR_NOT_FOUND 203L
//
// MessageId: ERROR_NO_SIGNAL_SENT
//
// MessageText:
//
// No process in the command subtree has a signal handler.
//
#define ERROR_NO_SIGNAL_SENT 205L
//
// MessageId: ERROR_FILENAME_EXCED_RANGE
//
// MessageText:
//
// The filename or extension is too long.
//
#define ERROR_FILENAME_EXCED_RANGE 206L
//
// MessageId: ERROR_RING2_STACK_IN_USE
//
// MessageText:
//
// The ring 2 stack is in use.
//
#define ERROR_RING2_STACK_IN_USE 207L
//
// MessageId: ERROR_META_EXPANSION_TOO_LONG
//
// MessageText:
//
// The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified.
//
#define ERROR_META_EXPANSION_TOO_LONG 208L
//
// MessageId: ERROR_INVALID_SIGNAL_NUMBER
//
// MessageText:
//
// The signal being posted is not correct.
//
#define ERROR_INVALID_SIGNAL_NUMBER 209L
//
// MessageId: ERROR_THREAD_1_INACTIVE
//
// MessageText:
//
// The signal handler cannot be set.
//
#define ERROR_THREAD_1_INACTIVE 210L
//
// MessageId: ERROR_LOCKED
//
// MessageText:
//
// The segment is locked and cannot be reallocated.
//
#define ERROR_LOCKED 212L
//
// MessageId: ERROR_TOO_MANY_MODULES
//
// MessageText:
//
// Too many dynamic-link modules are attached to this program or dynamic-link module.
//
#define ERROR_TOO_MANY_MODULES 214L
//
// MessageId: ERROR_NESTING_NOT_ALLOWED
//
// MessageText:
//
// Cannot nest calls to LoadModule.
//
#define ERROR_NESTING_NOT_ALLOWED 215L
//
// MessageId: ERROR_EXE_MACHINE_TYPE_MISMATCH
//
// MessageText:
//
// The image file %1 is valid, but is for a machine type other than the current machine.
// The specified extended attribute name was invalid.
//
#define ERROR_INVALID_EA_NAME 254L
//
// MessageId: ERROR_EA_LIST_INCONSISTENT
//
// MessageText:
//
// The extended attributes are inconsistent.
//
#define ERROR_EA_LIST_INCONSISTENT 255L
//
// MessageId: WAIT_TIMEOUT
//
// MessageText:
//
// The wait operation timed out.
//
#define WAIT_TIMEOUT 258L // dderror
//
// MessageId: ERROR_NO_MORE_ITEMS
//
// MessageText:
//
// No more data is available.
//
#define ERROR_NO_MORE_ITEMS 259L
//
// MessageId: ERROR_CANNOT_COPY
//
// MessageText:
//
// The copy functions cannot be used.
//
#define ERROR_CANNOT_COPY 266L
//
// MessageId: ERROR_DIRECTORY
//
// MessageText:
//
// The directory name is invalid.
//
#define ERROR_DIRECTORY 267L
//
// MessageId: ERROR_EAS_DIDNT_FIT
//
// MessageText:
//
// The extended attributes did not fit in the buffer.
//
#define ERROR_EAS_DIDNT_FIT 275L
//
// MessageId: ERROR_EA_FILE_CORRUPT
//
// MessageText:
//
// The extended attribute file on the mounted file system is corrupt.
//
#define ERROR_EA_FILE_CORRUPT 276L
//
// MessageId: ERROR_EA_TABLE_FULL
//
// MessageText:
//
// The extended attribute table file is full.
//
#define ERROR_EA_TABLE_FULL 277L
//
// MessageId: ERROR_INVALID_EA_HANDLE
//
// MessageText:
//
// The specified extended attribute handle is invalid.
//
#define ERROR_INVALID_EA_HANDLE 278L
//
// MessageId: ERROR_EAS_NOT_SUPPORTED
//
// MessageText:
//
// The mounted file system does not support extended attributes.
//
#define ERROR_EAS_NOT_SUPPORTED 282L
//
// MessageId: ERROR_NOT_OWNER
//
// MessageText:
//
// Attempt to release mutex not owned by caller.
//
#define ERROR_NOT_OWNER 288L
//
// MessageId: ERROR_TOO_MANY_POSTS
//
// MessageText:
//
// Too many posts were made to a semaphore.
//
#define ERROR_TOO_MANY_POSTS 298L
//
// MessageId: ERROR_PARTIAL_COPY
//
// MessageText:
//
// Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
//
#define ERROR_PARTIAL_COPY 299L
//
// MessageId: ERROR_OPLOCK_NOT_GRANTED
//
// MessageText:
//
// The oplock request is denied.
//
#define ERROR_OPLOCK_NOT_GRANTED 300L
//
// MessageId: ERROR_INVALID_OPLOCK_PROTOCOL
//
// MessageText:
//
// An invalid oplock acknowledgment was received by the system.
//
#define ERROR_INVALID_OPLOCK_PROTOCOL 301L
//
// MessageId: ERROR_DISK_TOO_FRAGMENTED
//
// MessageText:
//
// The volume is too fragmented to complete this operation.
//
#define ERROR_DISK_TOO_FRAGMENTED 302L
//
// MessageId: ERROR_DELETE_PENDING
//
// MessageText:
//
// The file cannot be opened because it is in the process of being deleted.
//
#define ERROR_DELETE_PENDING 303L
//
// MessageId: ERROR_MR_MID_NOT_FOUND
//
// MessageText:
//
// The system cannot find message text for message number 0x%1 in the message file for %2.
//
#define ERROR_MR_MID_NOT_FOUND 317L
//
// MessageId: ERROR_SCOPE_NOT_FOUND
//
// MessageText:
//
// The scope specified was not found.
//
#define ERROR_SCOPE_NOT_FOUND 318L
//
// MessageId: ERROR_INVALID_ADDRESS
//
// MessageText:
//
// Attempt to access invalid address.
//
#define ERROR_INVALID_ADDRESS 487L
//
// MessageId: ERROR_ARITHMETIC_OVERFLOW
//
// MessageText:
//
// Arithmetic result exceeded 32 bits.
//
#define ERROR_ARITHMETIC_OVERFLOW 534L
//
// MessageId: ERROR_PIPE_CONNECTED
//
// MessageText:
//
// There is a process on other end of the pipe.
//
#define ERROR_PIPE_CONNECTED 535L
//
// MessageId: ERROR_PIPE_LISTENING
//
// MessageText:
//
// Waiting for a process to open the other end of the pipe.
//
#define ERROR_PIPE_LISTENING 536L
//
// MessageId: ERROR_EA_ACCESS_DENIED
//
// MessageText:
//
// Access to the extended attribute was denied.
//
#define ERROR_EA_ACCESS_DENIED 994L
//
// MessageId: ERROR_OPERATION_ABORTED
//
// MessageText:
//
// The I/O operation has been aborted because of either a thread exit or an application request.
//
#define ERROR_OPERATION_ABORTED 995L
//
// MessageId: ERROR_IO_INCOMPLETE
//
// MessageText:
//
// Overlapped I/O event is not in a signaled state.
//
#define ERROR_IO_INCOMPLETE 996L
//
// MessageId: ERROR_IO_PENDING
//
// MessageText:
//
// Overlapped I/O operation is in progress.
//
#define ERROR_IO_PENDING 997L // dderror
//
// MessageId: ERROR_NOACCESS
//
// MessageText:
//
// Invalid access to memory location.
//
#define ERROR_NOACCESS 998L
//
// MessageId: ERROR_SWAPERROR
//
// MessageText:
//
// Error performing inpage operation.
//
#define ERROR_SWAPERROR 999L
//
// MessageId: ERROR_STACK_OVERFLOW
//
// MessageText:
//
// Recursion too deep; the stack overflowed.
//
#define ERROR_STACK_OVERFLOW 1001L
//
// MessageId: ERROR_INVALID_MESSAGE
//
// MessageText:
//
// The window cannot act on the sent message.
//
#define ERROR_INVALID_MESSAGE 1002L
//
// MessageId: ERROR_CAN_NOT_COMPLETE
//
// MessageText:
//
// Cannot complete this function.
//
#define ERROR_CAN_NOT_COMPLETE 1003L
//
// MessageId: ERROR_INVALID_FLAGS
//
// MessageText:
//
// Invalid flags.
//
#define ERROR_INVALID_FLAGS 1004L
//
// MessageId: ERROR_UNRECOGNIZED_VOLUME
//
// MessageText:
//
// The volume does not contain a recognized file system.
// Please make sure that all required file system drivers are loaded and that the volume is not corrupted.
//
#define ERROR_UNRECOGNIZED_VOLUME 1005L
//
// MessageId: ERROR_FILE_INVALID
//
// MessageText:
//
// The volume for a file has been externally altered so that the opened file is no longer valid.
//
#define ERROR_FILE_INVALID 1006L
//
// MessageId: ERROR_FULLSCREEN_MODE
//
// MessageText:
//
// The requested operation cannot be performed in full-screen mode.
//
#define ERROR_FULLSCREEN_MODE 1007L
//
// MessageId: ERROR_NO_TOKEN
//
// MessageText:
//
// An attempt was made to reference a token that does not exist.
//
#define ERROR_NO_TOKEN 1008L
//
// MessageId: ERROR_BADDB
//
// MessageText:
//
// The configuration registry database is corrupt.
//
#define ERROR_BADDB 1009L
//
// MessageId: ERROR_BADKEY
//
// MessageText:
//
// The configuration registry key is invalid.
//
#define ERROR_BADKEY 1010L
//
// MessageId: ERROR_CANTOPEN
//
// MessageText:
//
// The configuration registry key could not be opened.
//
#define ERROR_CANTOPEN 1011L
//
// MessageId: ERROR_CANTREAD
//
// MessageText:
//
// The configuration registry key could not be read.
//
#define ERROR_CANTREAD 1012L
//
// MessageId: ERROR_CANTWRITE
//
// MessageText:
//
// The configuration registry key could not be written.
//
#define ERROR_CANTWRITE 1013L
//
// MessageId: ERROR_REGISTRY_RECOVERED
//
// MessageText:
//
// One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful.
//
#define ERROR_REGISTRY_RECOVERED 1014L
//
// MessageId: ERROR_REGISTRY_CORRUPT
//
// MessageText:
//
// The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted.
//
#define ERROR_REGISTRY_CORRUPT 1015L
//
// MessageId: ERROR_REGISTRY_IO_FAILED
//
// MessageText:
//
// An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.
//
#define ERROR_REGISTRY_IO_FAILED 1016L
//
// MessageId: ERROR_NOT_REGISTRY_FILE
//
// MessageText:
//
// The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format.
//
#define ERROR_NOT_REGISTRY_FILE 1017L
//
// MessageId: ERROR_KEY_DELETED
//
// MessageText:
//
// Illegal operation attempted on a registry key that has been marked for deletion.
//
#define ERROR_KEY_DELETED 1018L
//
// MessageId: ERROR_NO_LOG_SPACE
//
// MessageText:
//
// System could not allocate the required space in a registry log.
//
#define ERROR_NO_LOG_SPACE 1019L
//
// MessageId: ERROR_KEY_HAS_CHILDREN
//
// MessageText:
//
// Cannot create a symbolic link in a registry key that already has subkeys or values.
//
#define ERROR_KEY_HAS_CHILDREN 1020L
//
// MessageId: ERROR_CHILD_MUST_BE_VOLATILE
//
// MessageText:
//
// Cannot create a stable subkey under a volatile parent key.
//
#define ERROR_CHILD_MUST_BE_VOLATILE 1021L
//
// MessageId: ERROR_NOTIFY_ENUM_DIR
//
// MessageText:
//
// A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
//
#define ERROR_NOTIFY_ENUM_DIR 1022L
//
// MessageId: ERROR_DEPENDENT_SERVICES_RUNNING
//
// MessageText:
//
// A stop control has been sent to a service that other running services are dependent on.
//
#define ERROR_DEPENDENT_SERVICES_RUNNING 1051L
//
// MessageId: ERROR_INVALID_SERVICE_CONTROL
//
// MessageText:
//
// The requested control is not valid for this service.
//
#define ERROR_INVALID_SERVICE_CONTROL 1052L
//
// MessageId: ERROR_SERVICE_REQUEST_TIMEOUT
//
// MessageText:
//
// The service did not respond to the start or control request in a timely fashion.
//
#define ERROR_SERVICE_REQUEST_TIMEOUT 1053L
//
// MessageId: ERROR_SERVICE_NO_THREAD
//
// MessageText:
//
// A thread could not be created for the service.
//
#define ERROR_SERVICE_NO_THREAD 1054L
//
// MessageId: ERROR_SERVICE_DATABASE_LOCKED
//
// MessageText:
//
// The service database is locked.
//
#define ERROR_SERVICE_DATABASE_LOCKED 1055L
//
// MessageId: ERROR_SERVICE_ALREADY_RUNNING
//
// MessageText:
//
// An instance of the service is already running.
//
#define ERROR_SERVICE_ALREADY_RUNNING 1056L
//
// MessageId: ERROR_INVALID_SERVICE_ACCOUNT
//
// MessageText:
//
// The account name is invalid or does not exist, or the password is invalid for the account name specified.
//
#define ERROR_INVALID_SERVICE_ACCOUNT 1057L
//
// MessageId: ERROR_SERVICE_DISABLED
//
// MessageText:
//
// The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
//
#define ERROR_SERVICE_DISABLED 1058L
//
// MessageId: ERROR_CIRCULAR_DEPENDENCY
//
// MessageText:
//
// Circular service dependency was specified.
//
#define ERROR_CIRCULAR_DEPENDENCY 1059L
//
// MessageId: ERROR_SERVICE_DOES_NOT_EXIST
//
// MessageText:
//
// The specified service does not exist as an installed service.
//
#define ERROR_SERVICE_DOES_NOT_EXIST 1060L
//
// MessageId: ERROR_SERVICE_CANNOT_ACCEPT_CTRL
//
// MessageText:
//
// The service cannot accept control messages at this time.
// An exception occurred in the service when handling the control request.
//
#define ERROR_EXCEPTION_IN_SERVICE 1064L
//
// MessageId: ERROR_DATABASE_DOES_NOT_EXIST
//
// MessageText:
//
// The database specified does not exist.
//
#define ERROR_DATABASE_DOES_NOT_EXIST 1065L
//
// MessageId: ERROR_SERVICE_SPECIFIC_ERROR
//
// MessageText:
//
// The service has returned a service-specific error code.
//
#define ERROR_SERVICE_SPECIFIC_ERROR 1066L
//
// MessageId: ERROR_PROCESS_ABORTED
//
// MessageText:
//
// The process terminated unexpectedly.
//
#define ERROR_PROCESS_ABORTED 1067L
//
// MessageId: ERROR_SERVICE_DEPENDENCY_FAIL
//
// MessageText:
//
// The dependency service or group failed to start.
//
#define ERROR_SERVICE_DEPENDENCY_FAIL 1068L
//
// MessageId: ERROR_SERVICE_LOGON_FAILED
//
// MessageText:
//
// The service did not start due to a logon failure.
//
#define ERROR_SERVICE_LOGON_FAILED 1069L
//
// MessageId: ERROR_SERVICE_START_HANG
//
// MessageText:
//
// After starting, the service hung in a start-pending state.
//
#define ERROR_SERVICE_START_HANG 1070L
//
// MessageId: ERROR_INVALID_SERVICE_LOCK
//
// MessageText:
//
// The specified service database lock is invalid.
//
#define ERROR_INVALID_SERVICE_LOCK 1071L
//
// MessageId: ERROR_SERVICE_MARKED_FOR_DELETE
//
// MessageText:
//
// The specified service has been marked for deletion.
//
#define ERROR_SERVICE_MARKED_FOR_DELETE 1072L
//
// MessageId: ERROR_SERVICE_EXISTS
//
// MessageText:
//
// The specified service already exists.
//
#define ERROR_SERVICE_EXISTS 1073L
//
// MessageId: ERROR_ALREADY_RUNNING_LKG
//
// MessageText:
//
// The system is currently running with the last-known-good configuration.
//
#define ERROR_ALREADY_RUNNING_LKG 1074L
//
// MessageId: ERROR_SERVICE_DEPENDENCY_DELETED
//
// MessageText:
//
// The dependency service does not exist or has been marked for deletion.
//
#define ERROR_SERVICE_DEPENDENCY_DELETED 1075L
//
// MessageId: ERROR_BOOT_ALREADY_ACCEPTED
//
// MessageText:
//
// The current boot has already been accepted for use as the last-known-good control set.
//
#define ERROR_BOOT_ALREADY_ACCEPTED 1076L
//
// MessageId: ERROR_SERVICE_NEVER_STARTED
//
// MessageText:
//
// No attempts to start the service have been made since the last boot.
//
#define ERROR_SERVICE_NEVER_STARTED 1077L
//
// MessageId: ERROR_DUPLICATE_SERVICE_NAME
//
// MessageText:
//
// The name is already in use as either a service name or a service display name.
//
#define ERROR_DUPLICATE_SERVICE_NAME 1078L
//
// MessageId: ERROR_DIFFERENT_SERVICE_ACCOUNT
//
// MessageText:
//
// The account specified for this service is different from the account specified for other services running in the same process.
//
#define ERROR_DIFFERENT_SERVICE_ACCOUNT 1079L
//
// MessageId: ERROR_CANNOT_DETECT_DRIVER_FAILURE
//
// MessageText:
//
// Failure actions can only be set for Win32 services, not for drivers.
//
#define ERROR_CANNOT_DETECT_DRIVER_FAILURE 1080L
//
// MessageId: ERROR_CANNOT_DETECT_PROCESS_ABORT
//
// MessageText:
//
// This service runs in the same process as the service control manager.
// Therefore, the service control manager cannot take action if this service's process terminates unexpectedly.
//
#define ERROR_CANNOT_DETECT_PROCESS_ABORT 1081L
//
// MessageId: ERROR_NO_RECOVERY_PROGRAM
//
// MessageText:
//
// No recovery program has been configured for this service.
//
#define ERROR_NO_RECOVERY_PROGRAM 1082L
//
// MessageId: ERROR_SERVICE_NOT_IN_EXE
//
// MessageText:
//
// The executable program that this service is configured to run in does not implement the service.
//
#define ERROR_SERVICE_NOT_IN_EXE 1083L
//
// MessageId: ERROR_NOT_SAFEBOOT_SERVICE
//
// MessageText:
//
// This service cannot be started in Safe Mode
//
#define ERROR_NOT_SAFEBOOT_SERVICE 1084L
//
// MessageId: ERROR_END_OF_MEDIA
//
// MessageText:
//
// The physical end of the tape has been reached.
//
#define ERROR_END_OF_MEDIA 1100L
//
// MessageId: ERROR_FILEMARK_DETECTED
//
// MessageText:
//
// A tape access reached a filemark.
//
#define ERROR_FILEMARK_DETECTED 1101L
//
// MessageId: ERROR_BEGINNING_OF_MEDIA
//
// MessageText:
//
// The beginning of the tape or a partition was encountered.
//
#define ERROR_BEGINNING_OF_MEDIA 1102L
//
// MessageId: ERROR_SETMARK_DETECTED
//
// MessageText:
//
// A tape access reached the end of a set of files.
//
#define ERROR_SETMARK_DETECTED 1103L
//
// MessageId: ERROR_NO_DATA_DETECTED
//
// MessageText:
//
// No more data is on the tape.
//
#define ERROR_NO_DATA_DETECTED 1104L
//
// MessageId: ERROR_PARTITION_FAILURE
//
// MessageText:
//
// Tape could not be partitioned.
//
#define ERROR_PARTITION_FAILURE 1105L
//
// MessageId: ERROR_INVALID_BLOCK_LENGTH
//
// MessageText:
//
// When accessing a new tape of a multivolume partition, the current block size is incorrect.
//
#define ERROR_INVALID_BLOCK_LENGTH 1106L
//
// MessageId: ERROR_DEVICE_NOT_PARTITIONED
//
// MessageText:
//
// Tape partition information could not be found when loading a tape.
//
#define ERROR_DEVICE_NOT_PARTITIONED 1107L
//
// MessageId: ERROR_UNABLE_TO_LOCK_MEDIA
//
// MessageText:
//
// Unable to lock the media eject mechanism.
//
#define ERROR_UNABLE_TO_LOCK_MEDIA 1108L
//
// MessageId: ERROR_UNABLE_TO_UNLOAD_MEDIA
//
// MessageText:
//
// Unable to unload the media.
//
#define ERROR_UNABLE_TO_UNLOAD_MEDIA 1109L
//
// MessageId: ERROR_MEDIA_CHANGED
//
// MessageText:
//
// The media in the drive may have changed.
//
#define ERROR_MEDIA_CHANGED 1110L
//
// MessageId: ERROR_BUS_RESET
//
// MessageText:
//
// The I/O bus was reset.
//
#define ERROR_BUS_RESET 1111L
//
// MessageId: ERROR_NO_MEDIA_IN_DRIVE
//
// MessageText:
//
// No media in drive.
//
#define ERROR_NO_MEDIA_IN_DRIVE 1112L
//
// MessageId: ERROR_NO_UNICODE_TRANSLATION
//
// MessageText:
//
// No mapping for the Unicode character exists in the target multi-byte code page.
//
#define ERROR_NO_UNICODE_TRANSLATION 1113L
//
// MessageId: ERROR_DLL_INIT_FAILED
//
// MessageText:
//
// A dynamic link library (DLL) initialization routine failed.
//
#define ERROR_DLL_INIT_FAILED 1114L
//
// MessageId: ERROR_SHUTDOWN_IN_PROGRESS
//
// MessageText:
//
// A system shutdown is in progress.
//
#define ERROR_SHUTDOWN_IN_PROGRESS 1115L
//
// MessageId: ERROR_NO_SHUTDOWN_IN_PROGRESS
//
// MessageText:
//
// Unable to abort the system shutdown because no shutdown was in progress.
//
#define ERROR_NO_SHUTDOWN_IN_PROGRESS 1116L
//
// MessageId: ERROR_IO_DEVICE
//
// MessageText:
//
// The request could not be performed because of an I/O device error.
//
#define ERROR_IO_DEVICE 1117L
//
// MessageId: ERROR_SERIAL_NO_DEVICE
//
// MessageText:
//
// No serial device was successfully initialized. The serial driver will unload.
//
#define ERROR_SERIAL_NO_DEVICE 1118L
//
// MessageId: ERROR_IRQ_BUSY
//
// MessageText:
//
// Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened.
//
#define ERROR_IRQ_BUSY 1119L
//
// MessageId: ERROR_MORE_WRITES
//
// MessageText:
//
// A serial I/O operation was completed by another write to the serial port.
// (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
//
#define ERROR_MORE_WRITES 1120L
//
// MessageId: ERROR_COUNTER_TIMEOUT
//
// MessageText:
//
// A serial I/O operation completed because the timeout period expired.
// (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
//
#define ERROR_COUNTER_TIMEOUT 1121L
//
// MessageId: ERROR_FLOPPY_ID_MARK_NOT_FOUND
//
// MessageText:
//
// No ID address mark was found on the floppy disk.
//
#define ERROR_FLOPPY_ID_MARK_NOT_FOUND 1122L
//
// MessageId: ERROR_FLOPPY_WRONG_CYLINDER
//
// MessageText:
//
// Mismatch between the floppy disk sector ID field and the floppy disk controller track address.
//
#define ERROR_FLOPPY_WRONG_CYLINDER 1123L
//
// MessageId: ERROR_FLOPPY_UNKNOWN_ERROR
//
// MessageText:
//
// The floppy disk controller reported an error that is not recognized by the floppy disk driver.
//
#define ERROR_FLOPPY_UNKNOWN_ERROR 1124L
//
// MessageId: ERROR_FLOPPY_BAD_REGISTERS
//
// MessageText:
//
// The floppy disk controller returned inconsistent results in its registers.
//
#define ERROR_FLOPPY_BAD_REGISTERS 1125L
//
// MessageId: ERROR_DISK_RECALIBRATE_FAILED
//
// MessageText:
//
// While accessing the hard disk, a recalibrate operation failed, even after retries.
//
#define ERROR_DISK_RECALIBRATE_FAILED 1126L
//
// MessageId: ERROR_DISK_OPERATION_FAILED
//
// MessageText:
//
// While accessing the hard disk, a disk operation failed even after retries.
//
#define ERROR_DISK_OPERATION_FAILED 1127L
//
// MessageId: ERROR_DISK_RESET_FAILED
//
// MessageText:
//
// While accessing the hard disk, a disk controller reset was needed, but even that failed.
//
#define ERROR_DISK_RESET_FAILED 1128L
//
// MessageId: ERROR_EOM_OVERFLOW
//
// MessageText:
//
// Physical end of tape encountered.
//
#define ERROR_EOM_OVERFLOW 1129L
//
// MessageId: ERROR_NOT_ENOUGH_SERVER_MEMORY
//
// MessageText:
//
// Not enough server storage is available to process this command.
//
#define ERROR_NOT_ENOUGH_SERVER_MEMORY 1130L
//
// MessageId: ERROR_POSSIBLE_DEADLOCK
//
// MessageText:
//
// A potential deadlock condition has been detected.
//
#define ERROR_POSSIBLE_DEADLOCK 1131L
//
// MessageId: ERROR_MAPPED_ALIGNMENT
//
// MessageText:
//
// The base address or the file offset specified does not have the proper alignment.
//
#define ERROR_MAPPED_ALIGNMENT 1132L
//
// MessageId: ERROR_SET_POWER_STATE_VETOED
//
// MessageText:
//
// An attempt to change the system power state was vetoed by another application or driver.
//
#define ERROR_SET_POWER_STATE_VETOED 1140L
//
// MessageId: ERROR_SET_POWER_STATE_FAILED
//
// MessageText:
//
// The system BIOS failed an attempt to change the system power state.
//
#define ERROR_SET_POWER_STATE_FAILED 1141L
//
// MessageId: ERROR_TOO_MANY_LINKS
//
// MessageText:
//
// An attempt was made to create more links on a file than the file system supports.
//
#define ERROR_TOO_MANY_LINKS 1142L
//
// MessageId: ERROR_OLD_WIN_VERSION
//
// MessageText:
//
// The specified program requires a newer version of Windows.
//
#define ERROR_OLD_WIN_VERSION 1150L
//
// MessageId: ERROR_APP_WRONG_OS
//
// MessageText:
//
// The specified program is not a Windows or MS-DOS program.
//
#define ERROR_APP_WRONG_OS 1151L
//
// MessageId: ERROR_SINGLE_INSTANCE_APP
//
// MessageText:
//
// Cannot start more than one instance of the specified program.
//
#define ERROR_SINGLE_INSTANCE_APP 1152L
//
// MessageId: ERROR_RMODE_APP
//
// MessageText:
//
// The specified program was written for an earlier version of Windows.
//
#define ERROR_RMODE_APP 1153L
//
// MessageId: ERROR_INVALID_DLL
//
// MessageText:
//
// One of the library files needed to run this application is damaged.
//
#define ERROR_INVALID_DLL 1154L
//
// MessageId: ERROR_NO_ASSOCIATION
//
// MessageText:
//
// No application is associated with the specified file for this operation.
//
#define ERROR_NO_ASSOCIATION 1155L
//
// MessageId: ERROR_DDE_FAIL
//
// MessageText:
//
// An error occurred in sending the command to the application.
//
#define ERROR_DDE_FAIL 1156L
//
// MessageId: ERROR_DLL_NOT_FOUND
//
// MessageText:
//
// One of the library files needed to run this application cannot be found.
//
#define ERROR_DLL_NOT_FOUND 1157L
//
// MessageId: ERROR_NO_MORE_USER_HANDLES
//
// MessageText:
//
// The current process has used all of its system allowance of handles for Window Manager objects.
//
#define ERROR_NO_MORE_USER_HANDLES 1158L
//
// MessageId: ERROR_MESSAGE_SYNC_ONLY
//
// MessageText:
//
// The message can be used only with synchronous operations.
//
#define ERROR_MESSAGE_SYNC_ONLY 1159L
//
// MessageId: ERROR_SOURCE_ELEMENT_EMPTY
//
// MessageText:
//
// The indicated source element has no media.
//
#define ERROR_SOURCE_ELEMENT_EMPTY 1160L
//
// MessageId: ERROR_DESTINATION_ELEMENT_FULL
//
// MessageText:
//
// The indicated destination element already contains media.
//
#define ERROR_DESTINATION_ELEMENT_FULL 1161L
//
// MessageId: ERROR_ILLEGAL_ELEMENT_ADDRESS
//
// MessageText:
//
// The indicated element does not exist.
//
#define ERROR_ILLEGAL_ELEMENT_ADDRESS 1162L
//
// MessageId: ERROR_MAGAZINE_NOT_PRESENT
//
// MessageText:
//
// The indicated element is part of a magazine that is not present.
// The device has indicated that cleaning is required before further operations are attempted.
//
#define ERROR_DEVICE_REQUIRES_CLEANING 1165L
//
// MessageId: ERROR_DEVICE_DOOR_OPEN
//
// MessageText:
//
// The device has indicated that its door is open.
//
#define ERROR_DEVICE_DOOR_OPEN 1166L
//
// MessageId: ERROR_DEVICE_NOT_CONNECTED
//
// MessageText:
//
// The device is not connected.
//
#define ERROR_DEVICE_NOT_CONNECTED 1167L
//
// MessageId: ERROR_NOT_FOUND
//
// MessageText:
//
// Element not found.
//
#define ERROR_NOT_FOUND 1168L
//
// MessageId: ERROR_NO_MATCH
//
// MessageText:
//
// There was no match for the specified key in the index.
//
#define ERROR_NO_MATCH 1169L
//
// MessageId: ERROR_SET_NOT_FOUND
//
// MessageText:
//
// The property set specified does not exist on the object.
//
#define ERROR_SET_NOT_FOUND 1170L
//
// MessageId: ERROR_POINT_NOT_FOUND
//
// MessageText:
//
// The point passed to GetMouseMovePoints is not in the buffer.
//
#define ERROR_POINT_NOT_FOUND 1171L
//
// MessageId: ERROR_NO_TRACKING_SERVICE
//
// MessageText:
//
// The tracking (workstation) service is not running.
//
#define ERROR_NO_TRACKING_SERVICE 1172L
//
// MessageId: ERROR_NO_VOLUME_ID
//
// MessageText:
//
// The Volume ID could not be found.
//
#define ERROR_NO_VOLUME_ID 1173L
//
// MessageId: ERROR_UNABLE_TO_REMOVE_REPLACED
//
// MessageText:
//
// Unable to remove the file to be replaced.
//
#define ERROR_UNABLE_TO_REMOVE_REPLACED 1175L
//
// MessageId: ERROR_UNABLE_TO_MOVE_REPLACEMENT
//
// MessageText:
//
// Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name.
//
#define ERROR_UNABLE_TO_MOVE_REPLACEMENT 1176L
//
// MessageId: ERROR_UNABLE_TO_MOVE_REPLACEMENT_2
//
// MessageText:
//
// Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name.
//
#define ERROR_UNABLE_TO_MOVE_REPLACEMENT_2 1177L
//
// MessageId: ERROR_JOURNAL_DELETE_IN_PROGRESS
//
// MessageText:
//
// The volume change journal is being deleted.
//
#define ERROR_JOURNAL_DELETE_IN_PROGRESS 1178L
//
// MessageId: ERROR_JOURNAL_NOT_ACTIVE
//
// MessageText:
//
// The volume change journal is not active.
//
#define ERROR_JOURNAL_NOT_ACTIVE 1179L
//
// MessageId: ERROR_POTENTIAL_FILE_FOUND
//
// MessageText:
//
// A file was found, but it may not be the correct file.
//
#define ERROR_POTENTIAL_FILE_FOUND 1180L
//
// MessageId: ERROR_JOURNAL_ENTRY_DELETED
//
// MessageText:
//
// The journal entry has been deleted from the journal.
//
#define ERROR_JOURNAL_ENTRY_DELETED 1181L
//
// MessageId: ERROR_BAD_DEVICE
//
// MessageText:
//
// The specified device name is invalid.
//
#define ERROR_BAD_DEVICE 1200L
//
// MessageId: ERROR_CONNECTION_UNAVAIL
//
// MessageText:
//
// The device is not currently connected but it is a remembered connection.
//
#define ERROR_CONNECTION_UNAVAIL 1201L
//
// MessageId: ERROR_DEVICE_ALREADY_REMEMBERED
//
// MessageText:
//
// The local device name has a remembered connection to another network resource.
//
#define ERROR_DEVICE_ALREADY_REMEMBERED 1202L
//
// MessageId: ERROR_NO_NET_OR_BAD_PATH
//
// MessageText:
//
// No network provider accepted the given network path.
//
#define ERROR_NO_NET_OR_BAD_PATH 1203L
//
// MessageId: ERROR_BAD_PROVIDER
//
// MessageText:
//
// The specified network provider name is invalid.
//
#define ERROR_BAD_PROVIDER 1204L
//
// MessageId: ERROR_CANNOT_OPEN_PROFILE
//
// MessageText:
//
// Unable to open the network connection profile.
//
#define ERROR_CANNOT_OPEN_PROFILE 1205L
//
// MessageId: ERROR_BAD_PROFILE
//
// MessageText:
//
// The network connection profile is corrupted.
//
#define ERROR_BAD_PROFILE 1206L
//
// MessageId: ERROR_NOT_CONTAINER
//
// MessageText:
//
// Cannot enumerate a noncontainer.
//
#define ERROR_NOT_CONTAINER 1207L
//
// MessageId: ERROR_EXTENDED_ERROR
//
// MessageText:
//
// An extended error has occurred.
//
#define ERROR_EXTENDED_ERROR 1208L
//
// MessageId: ERROR_INVALID_GROUPNAME
//
// MessageText:
//
// The format of the specified group name is invalid.
//
#define ERROR_INVALID_GROUPNAME 1209L
//
// MessageId: ERROR_INVALID_COMPUTERNAME
//
// MessageText:
//
// The format of the specified computer name is invalid.
//
#define ERROR_INVALID_COMPUTERNAME 1210L
//
// MessageId: ERROR_INVALID_EVENTNAME
//
// MessageText:
//
// The format of the specified event name is invalid.
//
#define ERROR_INVALID_EVENTNAME 1211L
//
// MessageId: ERROR_INVALID_DOMAINNAME
//
// MessageText:
//
// The format of the specified domain name is invalid.
//
#define ERROR_INVALID_DOMAINNAME 1212L
//
// MessageId: ERROR_INVALID_SERVICENAME
//
// MessageText:
//
// The format of the specified service name is invalid.
//
#define ERROR_INVALID_SERVICENAME 1213L
//
// MessageId: ERROR_INVALID_NETNAME
//
// MessageText:
//
// The format of the specified network name is invalid.
//
#define ERROR_INVALID_NETNAME 1214L
//
// MessageId: ERROR_INVALID_SHARENAME
//
// MessageText:
//
// The format of the specified share name is invalid.
//
#define ERROR_INVALID_SHARENAME 1215L
//
// MessageId: ERROR_INVALID_PASSWORDNAME
//
// MessageText:
//
// The format of the specified password is invalid.
//
#define ERROR_INVALID_PASSWORDNAME 1216L
//
// MessageId: ERROR_INVALID_MESSAGENAME
//
// MessageText:
//
// The format of the specified message name is invalid.
//
#define ERROR_INVALID_MESSAGENAME 1217L
//
// MessageId: ERROR_INVALID_MESSAGEDEST
//
// MessageText:
//
// The format of the specified message destination is invalid.
//
#define ERROR_INVALID_MESSAGEDEST 1218L
//
// MessageId: ERROR_SESSION_CREDENTIAL_CONFLICT
//
// MessageText:
//
// Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.
//
#define ERROR_SESSION_CREDENTIAL_CONFLICT 1219L
//
// MessageId: ERROR_REMOTE_SESSION_LIMIT_EXCEEDED
//
// MessageText:
//
// An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
//
#define ERROR_REMOTE_SESSION_LIMIT_EXCEEDED 1220L
//
// MessageId: ERROR_DUP_DOMAINNAME
//
// MessageText:
//
// The workgroup or domain name is already in use by another computer on the network.
//
#define ERROR_DUP_DOMAINNAME 1221L
//
// MessageId: ERROR_NO_NETWORK
//
// MessageText:
//
// The network is not present or not started.
//
#define ERROR_NO_NETWORK 1222L
//
// MessageId: ERROR_CANCELLED
//
// MessageText:
//
// The operation was canceled by the user.
//
#define ERROR_CANCELLED 1223L
//
// MessageId: ERROR_USER_MAPPED_FILE
//
// MessageText:
//
// The requested operation cannot be performed on a file with a user-mapped section open.
//
#define ERROR_USER_MAPPED_FILE 1224L
//
// MessageId: ERROR_CONNECTION_REFUSED
//
// MessageText:
//
// The remote system refused the network connection.
//
#define ERROR_CONNECTION_REFUSED 1225L
//
// MessageId: ERROR_GRACEFUL_DISCONNECT
//
// MessageText:
//
// The network connection was gracefully closed.
//
#define ERROR_GRACEFUL_DISCONNECT 1226L
//
// MessageId: ERROR_ADDRESS_ALREADY_ASSOCIATED
//
// MessageText:
//
// The network transport endpoint already has an address associated with it.
//
#define ERROR_ADDRESS_ALREADY_ASSOCIATED 1227L
//
// MessageId: ERROR_ADDRESS_NOT_ASSOCIATED
//
// MessageText:
//
// An address has not yet been associated with the network endpoint.
//
#define ERROR_ADDRESS_NOT_ASSOCIATED 1228L
//
// MessageId: ERROR_CONNECTION_INVALID
//
// MessageText:
//
// An operation was attempted on a nonexistent network connection.
//
#define ERROR_CONNECTION_INVALID 1229L
//
// MessageId: ERROR_CONNECTION_ACTIVE
//
// MessageText:
//
// An invalid operation was attempted on an active network connection.
//
#define ERROR_CONNECTION_ACTIVE 1230L
//
// MessageId: ERROR_NETWORK_UNREACHABLE
//
// MessageText:
//
// The network location cannot be reached. For information about network troubleshooting, see Windows Help.
//
#define ERROR_NETWORK_UNREACHABLE 1231L
//
// MessageId: ERROR_HOST_UNREACHABLE
//
// MessageText:
//
// The network location cannot be reached. For information about network troubleshooting, see Windows Help.
//
#define ERROR_HOST_UNREACHABLE 1232L
//
// MessageId: ERROR_PROTOCOL_UNREACHABLE
//
// MessageText:
//
// The network location cannot be reached. For information about network troubleshooting, see Windows Help.
//
#define ERROR_PROTOCOL_UNREACHABLE 1233L
//
// MessageId: ERROR_PORT_UNREACHABLE
//
// MessageText:
//
// No service is operating at the destination network endpoint on the remote system.
//
#define ERROR_PORT_UNREACHABLE 1234L
//
// MessageId: ERROR_REQUEST_ABORTED
//
// MessageText:
//
// The request was aborted.
//
#define ERROR_REQUEST_ABORTED 1235L
//
// MessageId: ERROR_CONNECTION_ABORTED
//
// MessageText:
//
// The network connection was aborted by the local system.
//
#define ERROR_CONNECTION_ABORTED 1236L
//
// MessageId: ERROR_RETRY
//
// MessageText:
//
// The operation could not be completed. A retry should be performed.
//
#define ERROR_RETRY 1237L
//
// MessageId: ERROR_CONNECTION_COUNT_LIMIT
//
// MessageText:
//
// A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
//
#define ERROR_CONNECTION_COUNT_LIMIT 1238L
//
// MessageId: ERROR_LOGIN_TIME_RESTRICTION
//
// MessageText:
//
// Attempting to log in during an unauthorized time of day for this account.
//
#define ERROR_LOGIN_TIME_RESTRICTION 1239L
//
// MessageId: ERROR_LOGIN_WKSTA_RESTRICTION
//
// MessageText:
//
// The account is not authorized to log in from this station.
//
#define ERROR_LOGIN_WKSTA_RESTRICTION 1240L
//
// MessageId: ERROR_INCORRECT_ADDRESS
//
// MessageText:
//
// The network address could not be used for the operation requested.
//
#define ERROR_INCORRECT_ADDRESS 1241L
//
// MessageId: ERROR_ALREADY_REGISTERED
//
// MessageText:
//
// The service is already registered.
//
#define ERROR_ALREADY_REGISTERED 1242L
//
// MessageId: ERROR_SERVICE_NOT_FOUND
//
// MessageText:
//
// The specified service does not exist.
//
#define ERROR_SERVICE_NOT_FOUND 1243L
//
// MessageId: ERROR_NOT_AUTHENTICATED
//
// MessageText:
//
// The operation being requested was not performed because the user has not been authenticated.
//
#define ERROR_NOT_AUTHENTICATED 1244L
//
// MessageId: ERROR_NOT_LOGGED_ON
//
// MessageText:
//
// The operation being requested was not performed because the user has not logged on to the network.
// The specified service does not exist.
//
#define ERROR_NOT_LOGGED_ON 1245L
//
// MessageId: ERROR_CONTINUE
//
// MessageText:
//
// Continue with work in progress.
//
#define ERROR_CONTINUE 1246L // dderror
//
// MessageId: ERROR_ALREADY_INITIALIZED
//
// MessageText:
//
// An attempt was made to perform an initialization operation when initialization has already been completed.
//
#define ERROR_ALREADY_INITIALIZED 1247L
//
// MessageId: ERROR_NO_MORE_DEVICES
//
// MessageText:
//
// No more local devices.
//
#define ERROR_NO_MORE_DEVICES 1248L // dderror
//
// MessageId: ERROR_NO_SUCH_SITE
//
// MessageText:
//
// The specified site does not exist.
//
#define ERROR_NO_SUCH_SITE 1249L
//
// MessageId: ERROR_DOMAIN_CONTROLLER_EXISTS
//
// MessageText:
//
// A domain controller with the specified name already exists.
//
#define ERROR_DOMAIN_CONTROLLER_EXISTS 1250L
//
// MessageId: ERROR_ONLY_IF_CONNECTED
//
// MessageText:
//
// This operation is supported only when you are connected to the server.
//
#define ERROR_ONLY_IF_CONNECTED 1251L
//
// MessageId: ERROR_OVERRIDE_NOCHANGES
//
// MessageText:
//
// The group policy framework should call the extension even if there are no changes.
//
#define ERROR_OVERRIDE_NOCHANGES 1252L
//
// MessageId: ERROR_BAD_USER_PROFILE
//
// MessageText:
//
// The specified user does not have a valid profile.
//
#define ERROR_BAD_USER_PROFILE 1253L
//
// MessageId: ERROR_NOT_SUPPORTED_ON_SBS
//
// MessageText:
//
// This operation is not supported on a Microsoft Small Business Server
//
#define ERROR_NOT_SUPPORTED_ON_SBS 1254L
//
// MessageId: ERROR_SERVER_SHUTDOWN_IN_PROGRESS
//
// MessageText:
//
// The server machine is shutting down.
//
#define ERROR_SERVER_SHUTDOWN_IN_PROGRESS 1255L
//
// MessageId: ERROR_HOST_DOWN
//
// MessageText:
//
// The remote system is not available. For information about network troubleshooting, see Windows Help.
//
#define ERROR_HOST_DOWN 1256L
//
// MessageId: ERROR_NON_ACCOUNT_SID
//
// MessageText:
//
// The security identifier provided is not from an account domain.
//
#define ERROR_NON_ACCOUNT_SID 1257L
//
// MessageId: ERROR_NON_DOMAIN_SID
//
// MessageText:
//
// The security identifier provided does not have a domain component.
//
#define ERROR_NON_DOMAIN_SID 1258L
//
// MessageId: ERROR_APPHELP_BLOCK
//
// MessageText:
//
// AppHelp dialog canceled thus preventing the application from starting.
//
#define ERROR_APPHELP_BLOCK 1259L
//
// MessageId: ERROR_ACCESS_DISABLED_BY_POLICY
//
// MessageText:
//
// Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open Event Viewer or contact your system administrator.
//
#define ERROR_ACCESS_DISABLED_BY_POLICY 1260L
//
// MessageId: ERROR_REG_NAT_CONSUMPTION
//
// MessageText:
//
// A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific.
//
#define ERROR_REG_NAT_CONSUMPTION 1261L
//
// MessageId: ERROR_CSCSHARE_OFFLINE
//
// MessageText:
//
// The share is currently offline or does not exist.
//
#define ERROR_CSCSHARE_OFFLINE 1262L
//
// MessageId: ERROR_PKINIT_FAILURE
//
// MessageText:
//
// The kerberos protocol encountered an error while validating the
// KDC certificate during smartcard logon.
//
#define ERROR_PKINIT_FAILURE 1263L
//
// MessageId: ERROR_SMARTCARD_SUBSYSTEM_FAILURE
//
// MessageText:
//
// The kerberos protocol encountered an error while attempting to utilize
// the smartcard subsystem.
//
#define ERROR_SMARTCARD_SUBSYSTEM_FAILURE 1264L
//
// MessageId: ERROR_DOWNGRADE_DETECTED
//
// MessageText:
//
// The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
//
#define ERROR_DOWNGRADE_DETECTED 1265L
//
// Do not use ID's 1266 - 1270 as the symbolicNames have been moved to SEC_E_*
//
//
// MessageId: ERROR_MACHINE_LOCKED
//
// MessageText:
//
// The machine is locked and can not be shut down without the force option.
// The current thread has already been converted to a fiber.
//
#define ERROR_ALREADY_FIBER 1280L
//
// MessageId: ERROR_ALREADY_THREAD
//
// MessageText:
//
// The current thread has already been converted from a fiber.
//
#define ERROR_ALREADY_THREAD 1281L
//
// MessageId: ERROR_STACK_BUFFER_OVERRUN
//
// MessageText:
//
// The system detected an overrun of a stack-based buffer in this application. This
// overrun could potentially allow a malicious user to gain control of this application.
//
#define ERROR_STACK_BUFFER_OVERRUN 1282L
//
// MessageId: ERROR_PARAMETER_QUOTA_EXCEEDED
//
// MessageText:
//
// Data present in one of the parameters is more than the function can operate on.
//
#define ERROR_PARAMETER_QUOTA_EXCEEDED 1283L
//
// MessageId: ERROR_DEBUGGER_INACTIVE
//
// MessageText:
//
// An attempt to do an operation on a debug object failed because the object is in the process of being deleted.
//
#define ERROR_DEBUGGER_INACTIVE 1284L
//
// MessageId: ERROR_DELAY_LOAD_FAILED
//
// MessageText:
//
// An attempt to delay-load a .dll or get a function address in a delay-loaded .dll failed.
//
#define ERROR_DELAY_LOAD_FAILED 1285L
//
// MessageId: ERROR_VDM_DISALLOWED
//
// MessageText:
//
// %1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator.
//
#define ERROR_VDM_DISALLOWED 1286L
///////////////////////////
//
// Add new status codes before this point unless there is a component specific section below.
//
///////////////////////////
///////////////////////////
// //
// Security Status Codes //
// //
///////////////////////////
//
// MessageId: ERROR_NOT_ALL_ASSIGNED
//
// MessageText:
//
// Not all privileges referenced are assigned to the caller.
//
#define ERROR_NOT_ALL_ASSIGNED 1300L
//
// MessageId: ERROR_SOME_NOT_MAPPED
//
// MessageText:
//
// Some mapping between account names and security IDs was not done.
//
#define ERROR_SOME_NOT_MAPPED 1301L
//
// MessageId: ERROR_NO_QUOTAS_FOR_ACCOUNT
//
// MessageText:
//
// No system quota limits are specifically set for this account.
//
#define ERROR_NO_QUOTAS_FOR_ACCOUNT 1302L
//
// MessageId: ERROR_LOCAL_USER_SESSION_KEY
//
// MessageText:
//
// No encryption key is available. A well-known encryption key was returned.
//
#define ERROR_LOCAL_USER_SESSION_KEY 1303L
//
// MessageId: ERROR_NULL_LM_PASSWORD
//
// MessageText:
//
// The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.
//
#define ERROR_NULL_LM_PASSWORD 1304L
//
// MessageId: ERROR_UNKNOWN_REVISION
//
// MessageText:
//
// The revision level is unknown.
//
#define ERROR_UNKNOWN_REVISION 1305L
//
// MessageId: ERROR_REVISION_MISMATCH
//
// MessageText:
//
// Indicates two revision levels are incompatible.
//
#define ERROR_REVISION_MISMATCH 1306L
//
// MessageId: ERROR_INVALID_OWNER
//
// MessageText:
//
// This security ID may not be assigned as the owner of this object.
//
#define ERROR_INVALID_OWNER 1307L
//
// MessageId: ERROR_INVALID_PRIMARY_GROUP
//
// MessageText:
//
// This security ID may not be assigned as the primary group of an object.
//
#define ERROR_INVALID_PRIMARY_GROUP 1308L
//
// MessageId: ERROR_NO_IMPERSONATION_TOKEN
//
// MessageText:
//
// An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
//
#define ERROR_NO_IMPERSONATION_TOKEN 1309L
//
// MessageId: ERROR_CANT_DISABLE_MANDATORY
//
// MessageText:
//
// The group may not be disabled.
//
#define ERROR_CANT_DISABLE_MANDATORY 1310L
//
// MessageId: ERROR_NO_LOGON_SERVERS
//
// MessageText:
//
// There are currently no logon servers available to service the logon request.
//
#define ERROR_NO_LOGON_SERVERS 1311L
//
// MessageId: ERROR_NO_SUCH_LOGON_SESSION
//
// MessageText:
//
// A specified logon session does not exist. It may already have been terminated.
//
#define ERROR_NO_SUCH_LOGON_SESSION 1312L
//
// MessageId: ERROR_NO_SUCH_PRIVILEGE
//
// MessageText:
//
// A specified privilege does not exist.
//
#define ERROR_NO_SUCH_PRIVILEGE 1313L
//
// MessageId: ERROR_PRIVILEGE_NOT_HELD
//
// MessageText:
//
// A required privilege is not held by the client.
//
#define ERROR_PRIVILEGE_NOT_HELD 1314L
//
// MessageId: ERROR_INVALID_ACCOUNT_NAME
//
// MessageText:
//
// The name provided is not a properly formed account name.
//
#define ERROR_INVALID_ACCOUNT_NAME 1315L
//
// MessageId: ERROR_USER_EXISTS
//
// MessageText:
//
// The specified user already exists.
//
#define ERROR_USER_EXISTS 1316L
//
// MessageId: ERROR_NO_SUCH_USER
//
// MessageText:
//
// The specified user does not exist.
//
#define ERROR_NO_SUCH_USER 1317L
//
// MessageId: ERROR_GROUP_EXISTS
//
// MessageText:
//
// The specified group already exists.
//
#define ERROR_GROUP_EXISTS 1318L
//
// MessageId: ERROR_NO_SUCH_GROUP
//
// MessageText:
//
// The specified group does not exist.
//
#define ERROR_NO_SUCH_GROUP 1319L
//
// MessageId: ERROR_MEMBER_IN_GROUP
//
// MessageText:
//
// Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
//
#define ERROR_MEMBER_IN_GROUP 1320L
//
// MessageId: ERROR_MEMBER_NOT_IN_GROUP
//
// MessageText:
//
// The specified user account is not a member of the specified group account.
//
#define ERROR_MEMBER_NOT_IN_GROUP 1321L
//
// MessageId: ERROR_LAST_ADMIN
//
// MessageText:
//
// The last remaining administration account cannot be disabled or deleted.
//
#define ERROR_LAST_ADMIN 1322L
//
// MessageId: ERROR_WRONG_PASSWORD
//
// MessageText:
//
// Unable to update the password. The value provided as the current password is incorrect.
//
#define ERROR_WRONG_PASSWORD 1323L
//
// MessageId: ERROR_ILL_FORMED_PASSWORD
//
// MessageText:
//
// Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.
//
#define ERROR_ILL_FORMED_PASSWORD 1324L
//
// MessageId: ERROR_PASSWORD_RESTRICTION
//
// MessageText:
//
// Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain.
//
#define ERROR_PASSWORD_RESTRICTION 1325L
//
// MessageId: ERROR_LOGON_FAILURE
//
// MessageText:
//
// Logon failure: unknown user name or bad password.
//
#define ERROR_LOGON_FAILURE 1326L
//
// MessageId: ERROR_ACCOUNT_RESTRICTION
//
// MessageText:
//
// Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced.
//
#define ERROR_ACCOUNT_RESTRICTION 1327L
//
// MessageId: ERROR_INVALID_LOGON_HOURS
//
// MessageText:
//
// Logon failure: account logon time restriction violation.
//
#define ERROR_INVALID_LOGON_HOURS 1328L
//
// MessageId: ERROR_INVALID_WORKSTATION
//
// MessageText:
//
// Logon failure: user not allowed to log on to this computer.
//
#define ERROR_INVALID_WORKSTATION 1329L
//
// MessageId: ERROR_PASSWORD_EXPIRED
//
// MessageText:
//
// Logon failure: the specified account password has expired.
//
#define ERROR_PASSWORD_EXPIRED 1330L
//
// MessageId: ERROR_ACCOUNT_DISABLED
//
// MessageText:
//
// Logon failure: account currently disabled.
//
#define ERROR_ACCOUNT_DISABLED 1331L
//
// MessageId: ERROR_NONE_MAPPED
//
// MessageText:
//
// No mapping between account names and security IDs was done.
//
#define ERROR_NONE_MAPPED 1332L
//
// MessageId: ERROR_TOO_MANY_LUIDS_REQUESTED
//
// MessageText:
//
// Too many local user identifiers (LUIDs) were requested at one time.
//
#define ERROR_TOO_MANY_LUIDS_REQUESTED 1333L
//
// MessageId: ERROR_LUIDS_EXHAUSTED
//
// MessageText:
//
// No more local user identifiers (LUIDs) are available.
//
#define ERROR_LUIDS_EXHAUSTED 1334L
//
// MessageId: ERROR_INVALID_SUB_AUTHORITY
//
// MessageText:
//
// The subauthority part of a security ID is invalid for this particular use.
//
#define ERROR_INVALID_SUB_AUTHORITY 1335L
//
// MessageId: ERROR_INVALID_ACL
//
// MessageText:
//
// The access control list (ACL) structure is invalid.
//
#define ERROR_INVALID_ACL 1336L
//
// MessageId: ERROR_INVALID_SID
//
// MessageText:
//
// The security ID structure is invalid.
//
#define ERROR_INVALID_SID 1337L
//
// MessageId: ERROR_INVALID_SECURITY_DESCR
//
// MessageText:
//
// The security descriptor structure is invalid.
//
#define ERROR_INVALID_SECURITY_DESCR 1338L
//
// MessageId: ERROR_BAD_INHERITANCE_ACL
//
// MessageText:
//
// The inherited access control list (ACL) or access control entry (ACE) could not be built.
//
#define ERROR_BAD_INHERITANCE_ACL 1340L
//
// MessageId: ERROR_SERVER_DISABLED
//
// MessageText:
//
// The server is currently disabled.
//
#define ERROR_SERVER_DISABLED 1341L
//
// MessageId: ERROR_SERVER_NOT_DISABLED
//
// MessageText:
//
// The server is currently enabled.
//
#define ERROR_SERVER_NOT_DISABLED 1342L
//
// MessageId: ERROR_INVALID_ID_AUTHORITY
//
// MessageText:
//
// The value provided was an invalid value for an identifier authority.
//
#define ERROR_INVALID_ID_AUTHORITY 1343L
//
// MessageId: ERROR_ALLOTTED_SPACE_EXCEEDED
//
// MessageText:
//
// No more memory is available for security information updates.
//
#define ERROR_ALLOTTED_SPACE_EXCEEDED 1344L
//
// MessageId: ERROR_INVALID_GROUP_ATTRIBUTES
//
// MessageText:
//
// The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
//
#define ERROR_INVALID_GROUP_ATTRIBUTES 1345L
//
// MessageId: ERROR_BAD_IMPERSONATION_LEVEL
//
// MessageText:
//
// Either a required impersonation level was not provided, or the provided impersonation level is invalid.
//
#define ERROR_BAD_IMPERSONATION_LEVEL 1346L
//
// MessageId: ERROR_CANT_OPEN_ANONYMOUS
//
// MessageText:
//
// Cannot open an anonymous level security token.
//
#define ERROR_CANT_OPEN_ANONYMOUS 1347L
//
// MessageId: ERROR_BAD_VALIDATION_CLASS
//
// MessageText:
//
// The validation information class requested was invalid.
//
#define ERROR_BAD_VALIDATION_CLASS 1348L
//
// MessageId: ERROR_BAD_TOKEN_TYPE
//
// MessageText:
//
// The type of the token is inappropriate for its attempted use.
//
#define ERROR_BAD_TOKEN_TYPE 1349L
//
// MessageId: ERROR_NO_SECURITY_ON_OBJECT
//
// MessageText:
//
// Unable to perform a security operation on an object that has no associated security.
//
#define ERROR_NO_SECURITY_ON_OBJECT 1350L
//
// MessageId: ERROR_CANT_ACCESS_DOMAIN_INFO
//
// MessageText:
//
// Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.
//
#define ERROR_CANT_ACCESS_DOMAIN_INFO 1351L
//
// MessageId: ERROR_INVALID_SERVER_STATE
//
// MessageText:
//
// The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
//
#define ERROR_INVALID_SERVER_STATE 1352L
//
// MessageId: ERROR_INVALID_DOMAIN_STATE
//
// MessageText:
//
// The domain was in the wrong state to perform the security operation.
//
#define ERROR_INVALID_DOMAIN_STATE 1353L
//
// MessageId: ERROR_INVALID_DOMAIN_ROLE
//
// MessageText:
//
// This operation is only allowed for the Primary Domain Controller of the domain.
//
#define ERROR_INVALID_DOMAIN_ROLE 1354L
//
// MessageId: ERROR_NO_SUCH_DOMAIN
//
// MessageText:
//
// The specified domain either does not exist or could not be contacted.
//
#define ERROR_NO_SUCH_DOMAIN 1355L
//
// MessageId: ERROR_DOMAIN_EXISTS
//
// MessageText:
//
// The specified domain already exists.
//
#define ERROR_DOMAIN_EXISTS 1356L
//
// MessageId: ERROR_DOMAIN_LIMIT_EXCEEDED
//
// MessageText:
//
// An attempt was made to exceed the limit on the number of domains per server.
//
#define ERROR_DOMAIN_LIMIT_EXCEEDED 1357L
//
// MessageId: ERROR_INTERNAL_DB_CORRUPTION
//
// MessageText:
//
// Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.
//
#define ERROR_INTERNAL_DB_CORRUPTION 1358L
//
// MessageId: ERROR_INTERNAL_ERROR
//
// MessageText:
//
// An internal error occurred.
//
#define ERROR_INTERNAL_ERROR 1359L
//
// MessageId: ERROR_GENERIC_NOT_MAPPED
//
// MessageText:
//
// Generic access types were contained in an access mask which should already be mapped to nongeneric types.
//
#define ERROR_GENERIC_NOT_MAPPED 1360L
//
// MessageId: ERROR_BAD_DESCRIPTOR_FORMAT
//
// MessageText:
//
// A security descriptor is not in the right format (absolute or self-relative).
//
#define ERROR_BAD_DESCRIPTOR_FORMAT 1361L
//
// MessageId: ERROR_NOT_LOGON_PROCESS
//
// MessageText:
//
// The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
//
#define ERROR_NOT_LOGON_PROCESS 1362L
//
// MessageId: ERROR_LOGON_SESSION_EXISTS
//
// MessageText:
//
// Cannot start a new logon session with an ID that is already in use.
//
#define ERROR_LOGON_SESSION_EXISTS 1363L
//
// MessageId: ERROR_NO_SUCH_PACKAGE
//
// MessageText:
//
// A specified authentication package is unknown.
//
#define ERROR_NO_SUCH_PACKAGE 1364L
//
// MessageId: ERROR_BAD_LOGON_SESSION_STATE
//
// MessageText:
//
// The logon session is not in a state that is consistent with the requested operation.
//
#define ERROR_BAD_LOGON_SESSION_STATE 1365L
//
// MessageId: ERROR_LOGON_SESSION_COLLISION
//
// MessageText:
//
// The logon session ID is already in use.
//
#define ERROR_LOGON_SESSION_COLLISION 1366L
//
// MessageId: ERROR_INVALID_LOGON_TYPE
//
// MessageText:
//
// A logon request contained an invalid logon type value.
//
#define ERROR_INVALID_LOGON_TYPE 1367L
//
// MessageId: ERROR_CANNOT_IMPERSONATE
//
// MessageText:
//
// Unable to impersonate using a named pipe until data has been read from that pipe.
//
#define ERROR_CANNOT_IMPERSONATE 1368L
//
// MessageId: ERROR_RXACT_INVALID_STATE
//
// MessageText:
//
// The transaction state of a registry subtree is incompatible with the requested operation.
//
#define ERROR_RXACT_INVALID_STATE 1369L
//
// MessageId: ERROR_RXACT_COMMIT_FAILURE
//
// MessageText:
//
// An internal security database corruption has been encountered.
//
#define ERROR_RXACT_COMMIT_FAILURE 1370L
//
// MessageId: ERROR_SPECIAL_ACCOUNT
//
// MessageText:
//
// Cannot perform this operation on built-in accounts.
//
#define ERROR_SPECIAL_ACCOUNT 1371L
//
// MessageId: ERROR_SPECIAL_GROUP
//
// MessageText:
//
// Cannot perform this operation on this built-in special group.
//
#define ERROR_SPECIAL_GROUP 1372L
//
// MessageId: ERROR_SPECIAL_USER
//
// MessageText:
//
// Cannot perform this operation on this built-in special user.
//
#define ERROR_SPECIAL_USER 1373L
//
// MessageId: ERROR_MEMBERS_PRIMARY_GROUP
//
// MessageText:
//
// The user cannot be removed from a group because the group is currently the user's primary group.
//
#define ERROR_MEMBERS_PRIMARY_GROUP 1374L
//
// MessageId: ERROR_TOKEN_ALREADY_IN_USE
//
// MessageText:
//
// The token is already in use as a primary token.
//
#define ERROR_TOKEN_ALREADY_IN_USE 1375L
//
// MessageId: ERROR_NO_SUCH_ALIAS
//
// MessageText:
//
// The specified local group does not exist.
//
#define ERROR_NO_SUCH_ALIAS 1376L
//
// MessageId: ERROR_MEMBER_NOT_IN_ALIAS
//
// MessageText:
//
// The specified account name is not a member of the local group.
//
#define ERROR_MEMBER_NOT_IN_ALIAS 1377L
//
// MessageId: ERROR_MEMBER_IN_ALIAS
//
// MessageText:
//
// The specified account name is already a member of the local group.
//
#define ERROR_MEMBER_IN_ALIAS 1378L
//
// MessageId: ERROR_ALIAS_EXISTS
//
// MessageText:
//
// The specified local group already exists.
//
#define ERROR_ALIAS_EXISTS 1379L
//
// MessageId: ERROR_LOGON_NOT_GRANTED
//
// MessageText:
//
// Logon failure: the user has not been granted the requested logon type at this computer.
//
#define ERROR_LOGON_NOT_GRANTED 1380L
//
// MessageId: ERROR_TOO_MANY_SECRETS
//
// MessageText:
//
// The maximum number of secrets that may be stored in a single system has been exceeded.
//
#define ERROR_TOO_MANY_SECRETS 1381L
//
// MessageId: ERROR_SECRET_TOO_LONG
//
// MessageText:
//
// The length of a secret exceeds the maximum length allowed.
//
#define ERROR_SECRET_TOO_LONG 1382L
//
// MessageId: ERROR_INTERNAL_DB_ERROR
//
// MessageText:
//
// The local security authority database contains an internal inconsistency.
//
#define ERROR_INTERNAL_DB_ERROR 1383L
//
// MessageId: ERROR_TOO_MANY_CONTEXT_IDS
//
// MessageText:
//
// During a logon attempt, the user's security context accumulated too many security IDs.
//
#define ERROR_TOO_MANY_CONTEXT_IDS 1384L
//
// MessageId: ERROR_LOGON_TYPE_NOT_GRANTED
//
// MessageText:
//
// Logon failure: the user has not been granted the requested logon type at this computer.
//
#define ERROR_LOGON_TYPE_NOT_GRANTED 1385L
//
// MessageId: ERROR_NT_CROSS_ENCRYPTION_REQUIRED
//
// MessageText:
//
// A cross-encrypted password is necessary to change a user password.
//
#define ERROR_NT_CROSS_ENCRYPTION_REQUIRED 1386L
//
// MessageId: ERROR_NO_SUCH_MEMBER
//
// MessageText:
//
// A member could not be added to or removed from the local group because the member does not exist.
//
#define ERROR_NO_SUCH_MEMBER 1387L
//
// MessageId: ERROR_INVALID_MEMBER
//
// MessageText:
//
// A new member could not be added to a local group because the member has the wrong account type.
//
#define ERROR_INVALID_MEMBER 1388L
//
// MessageId: ERROR_TOO_MANY_SIDS
//
// MessageText:
//
// Too many security IDs have been specified.
//
#define ERROR_TOO_MANY_SIDS 1389L
//
// MessageId: ERROR_LM_CROSS_ENCRYPTION_REQUIRED
//
// MessageText:
//
// A cross-encrypted password is necessary to change this user password.
//
#define ERROR_LM_CROSS_ENCRYPTION_REQUIRED 1390L
//
// MessageId: ERROR_NO_INHERITANCE
//
// MessageText:
//
// Indicates an ACL contains no inheritable components.
//
#define ERROR_NO_INHERITANCE 1391L
//
// MessageId: ERROR_FILE_CORRUPT
//
// MessageText:
//
// The file or directory is corrupted and unreadable.
//
#define ERROR_FILE_CORRUPT 1392L
//
// MessageId: ERROR_DISK_CORRUPT
//
// MessageText:
//
// The disk structure is corrupted and unreadable.
//
#define ERROR_DISK_CORRUPT 1393L
//
// MessageId: ERROR_NO_USER_SESSION_KEY
//
// MessageText:
//
// There is no user session key for the specified logon session.
//
#define ERROR_NO_USER_SESSION_KEY 1394L
//
// MessageId: ERROR_LICENSE_QUOTA_EXCEEDED
//
// MessageText:
//
// The service being accessed is licensed for a particular number of connections.
// No more connections can be made to the service at this time because there are already as many connections as the service can accept.
//
#define ERROR_LICENSE_QUOTA_EXCEEDED 1395L
//
// MessageId: ERROR_WRONG_TARGET_NAME
//
// MessageText:
//
// Logon Failure: The target account name is incorrect.
//
#define ERROR_WRONG_TARGET_NAME 1396L
//
// MessageId: ERROR_MUTUAL_AUTH_FAILED
//
// MessageText:
//
// Mutual Authentication failed. The server's password is out of date at the domain controller.
//
#define ERROR_MUTUAL_AUTH_FAILED 1397L
//
// MessageId: ERROR_TIME_SKEW
//
// MessageText:
//
// There is a time and/or date difference between the client and server.
//
#define ERROR_TIME_SKEW 1398L
//
// MessageId: ERROR_CURRENT_DOMAIN_NOT_ALLOWED
//
// MessageText:
//
// This operation can not be performed on the current domain.
//
#define ERROR_CURRENT_DOMAIN_NOT_ALLOWED 1399L
// End of security error codes
///////////////////////////
// //
// WinUser Error Codes //
// //
///////////////////////////
//
// MessageId: ERROR_INVALID_WINDOW_HANDLE
//
// MessageText:
//
// Invalid window handle.
//
#define ERROR_INVALID_WINDOW_HANDLE 1400L
//
// MessageId: ERROR_INVALID_MENU_HANDLE
//
// MessageText:
//
// Invalid menu handle.
//
#define ERROR_INVALID_MENU_HANDLE 1401L
//
// MessageId: ERROR_INVALID_CURSOR_HANDLE
//
// MessageText:
//
// Invalid cursor handle.
//
#define ERROR_INVALID_CURSOR_HANDLE 1402L
//
// MessageId: ERROR_INVALID_ACCEL_HANDLE
//
// MessageText:
//
// Invalid accelerator table handle.
//
#define ERROR_INVALID_ACCEL_HANDLE 1403L
//
// MessageId: ERROR_INVALID_HOOK_HANDLE
//
// MessageText:
//
// Invalid hook handle.
//
#define ERROR_INVALID_HOOK_HANDLE 1404L
//
// MessageId: ERROR_INVALID_DWP_HANDLE
//
// MessageText:
//
// Invalid handle to a multiple-window position structure.
//
#define ERROR_INVALID_DWP_HANDLE 1405L
//
// MessageId: ERROR_TLW_WITH_WSCHILD
//
// MessageText:
//
// Cannot create a top-level child window.
//
#define ERROR_TLW_WITH_WSCHILD 1406L
//
// MessageId: ERROR_CANNOT_FIND_WND_CLASS
//
// MessageText:
//
// Cannot find window class.
//
#define ERROR_CANNOT_FIND_WND_CLASS 1407L
//
// MessageId: ERROR_WINDOW_OF_OTHER_THREAD
//
// MessageText:
//
// Invalid window; it belongs to other thread.
//
#define ERROR_WINDOW_OF_OTHER_THREAD 1408L
//
// MessageId: ERROR_HOTKEY_ALREADY_REGISTERED
//
// MessageText:
//
// Hot key is already registered.
//
#define ERROR_HOTKEY_ALREADY_REGISTERED 1409L
//
// MessageId: ERROR_CLASS_ALREADY_EXISTS
//
// MessageText:
//
// Class already exists.
//
#define ERROR_CLASS_ALREADY_EXISTS 1410L
//
// MessageId: ERROR_CLASS_DOES_NOT_EXIST
//
// MessageText:
//
// Class does not exist.
//
#define ERROR_CLASS_DOES_NOT_EXIST 1411L
//
// MessageId: ERROR_CLASS_HAS_WINDOWS
//
// MessageText:
//
// Class still has open windows.
//
#define ERROR_CLASS_HAS_WINDOWS 1412L
//
// MessageId: ERROR_INVALID_INDEX
//
// MessageText:
//
// Invalid index.
//
#define ERROR_INVALID_INDEX 1413L
//
// MessageId: ERROR_INVALID_ICON_HANDLE
//
// MessageText:
//
// Invalid icon handle.
//
#define ERROR_INVALID_ICON_HANDLE 1414L
//
// MessageId: ERROR_PRIVATE_DIALOG_INDEX
//
// MessageText:
//
// Using private DIALOG window words.
//
#define ERROR_PRIVATE_DIALOG_INDEX 1415L
//
// MessageId: ERROR_LISTBOX_ID_NOT_FOUND
//
// MessageText:
//
// The list box identifier was not found.
//
#define ERROR_LISTBOX_ID_NOT_FOUND 1416L
//
// MessageId: ERROR_NO_WILDCARD_CHARACTERS
//
// MessageText:
//
// No wildcards were found.
//
#define ERROR_NO_WILDCARD_CHARACTERS 1417L
//
// MessageId: ERROR_CLIPBOARD_NOT_OPEN
//
// MessageText:
//
// Thread does not have a clipboard open.
//
#define ERROR_CLIPBOARD_NOT_OPEN 1418L
//
// MessageId: ERROR_HOTKEY_NOT_REGISTERED
//
// MessageText:
//
// Hot key is not registered.
//
#define ERROR_HOTKEY_NOT_REGISTERED 1419L
//
// MessageId: ERROR_WINDOW_NOT_DIALOG
//
// MessageText:
//
// The window is not a valid dialog window.
//
#define ERROR_WINDOW_NOT_DIALOG 1420L
//
// MessageId: ERROR_CONTROL_ID_NOT_FOUND
//
// MessageText:
//
// Control ID not found.
//
#define ERROR_CONTROL_ID_NOT_FOUND 1421L
//
// MessageId: ERROR_INVALID_COMBOBOX_MESSAGE
//
// MessageText:
//
// Invalid message for a combo box because it does not have an edit control.
//
#define ERROR_INVALID_COMBOBOX_MESSAGE 1422L
//
// MessageId: ERROR_WINDOW_NOT_COMBOBOX
//
// MessageText:
//
// The window is not a combo box.
//
#define ERROR_WINDOW_NOT_COMBOBOX 1423L
//
// MessageId: ERROR_INVALID_EDIT_HEIGHT
//
// MessageText:
//
// Height must be less than 256.
//
#define ERROR_INVALID_EDIT_HEIGHT 1424L
//
// MessageId: ERROR_DC_NOT_FOUND
//
// MessageText:
//
// Invalid device context (DC) handle.
//
#define ERROR_DC_NOT_FOUND 1425L
//
// MessageId: ERROR_INVALID_HOOK_FILTER
//
// MessageText:
//
// Invalid hook procedure type.
//
#define ERROR_INVALID_HOOK_FILTER 1426L
//
// MessageId: ERROR_INVALID_FILTER_PROC
//
// MessageText:
//
// Invalid hook procedure.
//
#define ERROR_INVALID_FILTER_PROC 1427L
//
// MessageId: ERROR_HOOK_NEEDS_HMOD
//
// MessageText:
//
// Cannot set nonlocal hook without a module handle.
//
#define ERROR_HOOK_NEEDS_HMOD 1428L
//
// MessageId: ERROR_GLOBAL_ONLY_HOOK
//
// MessageText:
//
// This hook procedure can only be set globally.
//
#define ERROR_GLOBAL_ONLY_HOOK 1429L
//
// MessageId: ERROR_JOURNAL_HOOK_SET
//
// MessageText:
//
// The journal hook procedure is already installed.
// This operation returned because the timeout period expired.
//
#define ERROR_TIMEOUT 1460L
//
// MessageId: ERROR_INVALID_MONITOR_HANDLE
//
// MessageText:
//
// Invalid monitor handle.
//
#define ERROR_INVALID_MONITOR_HANDLE 1461L
// End of WinUser error codes
///////////////////////////
// //
// Eventlog Status Codes //
// //
///////////////////////////
//
// MessageId: ERROR_EVENTLOG_FILE_CORRUPT
//
// MessageText:
//
// The event log file is corrupted.
//
#define ERROR_EVENTLOG_FILE_CORRUPT 1500L
//
// MessageId: ERROR_EVENTLOG_CANT_START
//
// MessageText:
//
// No event log file could be opened, so the event logging service did not start.
//
#define ERROR_EVENTLOG_CANT_START 1501L
//
// MessageId: ERROR_LOG_FILE_FULL
//
// MessageText:
//
// The event log file is full.
//
#define ERROR_LOG_FILE_FULL 1502L
//
// MessageId: ERROR_EVENTLOG_FILE_CHANGED
//
// MessageText:
//
// The event log file has changed between read operations.
//
#define ERROR_EVENTLOG_FILE_CHANGED 1503L
// End of eventlog error codes
///////////////////////////
// //
// MSI Error Codes //
// //
///////////////////////////
//
// MessageId: ERROR_INSTALL_SERVICE_FAILURE
//
// MessageText:
//
// The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance.
//
#define ERROR_INSTALL_SERVICE_FAILURE 1601L
//
// MessageId: ERROR_INSTALL_USEREXIT
//
// MessageText:
//
// User cancelled installation.
//
#define ERROR_INSTALL_USEREXIT 1602L
//
// MessageId: ERROR_INSTALL_FAILURE
//
// MessageText:
//
// Fatal error during installation.
//
#define ERROR_INSTALL_FAILURE 1603L
//
// MessageId: ERROR_INSTALL_SUSPEND
//
// MessageText:
//
// Installation suspended, incomplete.
//
#define ERROR_INSTALL_SUSPEND 1604L
//
// MessageId: ERROR_UNKNOWN_PRODUCT
//
// MessageText:
//
// This action is only valid for products that are currently installed.
//
#define ERROR_UNKNOWN_PRODUCT 1605L
//
// MessageId: ERROR_UNKNOWN_FEATURE
//
// MessageText:
//
// Feature ID not registered.
//
#define ERROR_UNKNOWN_FEATURE 1606L
//
// MessageId: ERROR_UNKNOWN_COMPONENT
//
// MessageText:
//
// Component ID not registered.
//
#define ERROR_UNKNOWN_COMPONENT 1607L
//
// MessageId: ERROR_UNKNOWN_PROPERTY
//
// MessageText:
//
// Unknown property.
//
#define ERROR_UNKNOWN_PROPERTY 1608L
//
// MessageId: ERROR_INVALID_HANDLE_STATE
//
// MessageText:
//
// Handle is in an invalid state.
//
#define ERROR_INVALID_HANDLE_STATE 1609L
//
// MessageId: ERROR_BAD_CONFIGURATION
//
// MessageText:
//
// The configuration data for this product is corrupt. Contact your support personnel.
//
#define ERROR_BAD_CONFIGURATION 1610L
//
// MessageId: ERROR_INDEX_ABSENT
//
// MessageText:
//
// Component qualifier not present.
//
#define ERROR_INDEX_ABSENT 1611L
//
// MessageId: ERROR_INSTALL_SOURCE_ABSENT
//
// MessageText:
//
// The installation source for this product is not available. Verify that the source exists and that you can access it.
//
#define ERROR_INSTALL_SOURCE_ABSENT 1612L
//
// MessageId: ERROR_INSTALL_PACKAGE_VERSION
//
// MessageText:
//
// This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
//
#define ERROR_INSTALL_PACKAGE_VERSION 1613L
//
// MessageId: ERROR_PRODUCT_UNINSTALLED
//
// MessageText:
//
// Product is uninstalled.
//
#define ERROR_PRODUCT_UNINSTALLED 1614L
//
// MessageId: ERROR_BAD_QUERY_SYNTAX
//
// MessageText:
//
// SQL query syntax invalid or unsupported.
//
#define ERROR_BAD_QUERY_SYNTAX 1615L
//
// MessageId: ERROR_INVALID_FIELD
//
// MessageText:
//
// Record field does not exist.
//
#define ERROR_INVALID_FIELD 1616L
//
// MessageId: ERROR_DEVICE_REMOVED
//
// MessageText:
//
// The device has been removed.
//
#define ERROR_DEVICE_REMOVED 1617L
//
// MessageId: ERROR_INSTALL_ALREADY_RUNNING
//
// MessageText:
//
// Another installation is already in progress. Complete that installation before proceeding with this install.
//
#define ERROR_INSTALL_ALREADY_RUNNING 1618L
//
// MessageId: ERROR_INSTALL_PACKAGE_OPEN_FAILED
//
// MessageText:
//
// This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.
//
#define ERROR_INSTALL_PACKAGE_OPEN_FAILED 1619L
//
// MessageId: ERROR_INSTALL_PACKAGE_INVALID
//
// MessageText:
//
// This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.
//
#define ERROR_INSTALL_PACKAGE_INVALID 1620L
//
// MessageId: ERROR_INSTALL_UI_FAILURE
//
// MessageText:
//
// There was an error starting the Windows Installer service user interface. Contact your support personnel.
//
#define ERROR_INSTALL_UI_FAILURE 1621L
//
// MessageId: ERROR_INSTALL_LOG_FAILURE
//
// MessageText:
//
// Error opening installation log file. Verify that the specified log file location exists and that you can write to it.
//
#define ERROR_INSTALL_LOG_FAILURE 1622L
//
// MessageId: ERROR_INSTALL_LANGUAGE_UNSUPPORTED
//
// MessageText:
//
// The language of this installation package is not supported by your system.
//
#define ERROR_INSTALL_LANGUAGE_UNSUPPORTED 1623L
//
// MessageId: ERROR_INSTALL_TRANSFORM_FAILURE
//
// MessageText:
//
// Error applying transforms. Verify that the specified transform paths are valid.
//
#define ERROR_INSTALL_TRANSFORM_FAILURE 1624L
//
// MessageId: ERROR_INSTALL_PACKAGE_REJECTED
//
// MessageText:
//
// This installation is forbidden by system policy. Contact your system administrator.
//
#define ERROR_INSTALL_PACKAGE_REJECTED 1625L
//
// MessageId: ERROR_FUNCTION_NOT_CALLED
//
// MessageText:
//
// Function could not be executed.
//
#define ERROR_FUNCTION_NOT_CALLED 1626L
//
// MessageId: ERROR_FUNCTION_FAILED
//
// MessageText:
//
// Function failed during execution.
//
#define ERROR_FUNCTION_FAILED 1627L
//
// MessageId: ERROR_INVALID_TABLE
//
// MessageText:
//
// Invalid or unknown table specified.
//
#define ERROR_INVALID_TABLE 1628L
//
// MessageId: ERROR_DATATYPE_MISMATCH
//
// MessageText:
//
// Data supplied is of wrong type.
//
#define ERROR_DATATYPE_MISMATCH 1629L
//
// MessageId: ERROR_UNSUPPORTED_TYPE
//
// MessageText:
//
// Data of this type is not supported.
//
#define ERROR_UNSUPPORTED_TYPE 1630L
//
// MessageId: ERROR_CREATE_FAILED
//
// MessageText:
//
// The Windows Installer service failed to start. Contact your support personnel.
//
#define ERROR_CREATE_FAILED 1631L
//
// MessageId: ERROR_INSTALL_TEMP_UNWRITABLE
//
// MessageText:
//
// The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder.
//
#define ERROR_INSTALL_TEMP_UNWRITABLE 1632L
//
// MessageId: ERROR_INSTALL_PLATFORM_UNSUPPORTED
//
// MessageText:
//
// This installation package is not supported by this processor type. Contact your product vendor.
//
#define ERROR_INSTALL_PLATFORM_UNSUPPORTED 1633L
//
// MessageId: ERROR_INSTALL_NOTUSED
//
// MessageText:
//
// Component not used on this computer.
//
#define ERROR_INSTALL_NOTUSED 1634L
//
// MessageId: ERROR_PATCH_PACKAGE_OPEN_FAILED
//
// MessageText:
//
// This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.
//
#define ERROR_PATCH_PACKAGE_OPEN_FAILED 1635L
//
// MessageId: ERROR_PATCH_PACKAGE_INVALID
//
// MessageText:
//
// This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package.
//
#define ERROR_PATCH_PACKAGE_INVALID 1636L
//
// MessageId: ERROR_PATCH_PACKAGE_UNSUPPORTED
//
// MessageText:
//
// This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.
//
#define ERROR_PATCH_PACKAGE_UNSUPPORTED 1637L
//
// MessageId: ERROR_PRODUCT_VERSION
//
// MessageText:
//
// Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel.
//
#define ERROR_PRODUCT_VERSION 1638L
//
// MessageId: ERROR_INVALID_COMMAND_LINE
//
// MessageText:
//
// Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.
//
#define ERROR_INVALID_COMMAND_LINE 1639L
//
// MessageId: ERROR_INSTALL_REMOTE_DISALLOWED
//
// MessageText:
//
// Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator.
//
#define ERROR_INSTALL_REMOTE_DISALLOWED 1640L
//
// MessageId: ERROR_SUCCESS_REBOOT_INITIATED
//
// MessageText:
//
// The requested operation completed successfully. The system will be restarted so the changes can take effect.
//
#define ERROR_SUCCESS_REBOOT_INITIATED 1641L
//
// MessageId: ERROR_PATCH_TARGET_NOT_FOUND
//
// MessageText:
//
// The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer an
// d that you have the correct upgrade patch.
//
#define ERROR_PATCH_TARGET_NOT_FOUND 1642L
//
// MessageId: ERROR_PATCH_PACKAGE_REJECTED
//
// MessageText:
//
// The patch package is not permitted by software restriction policy.
//
#define ERROR_PATCH_PACKAGE_REJECTED 1643L
//
// MessageId: ERROR_INSTALL_TRANSFORM_REJECTED
//
// MessageText:
//
// One or more customizations are not permitted by software restriction policy.
//
#define ERROR_INSTALL_TRANSFORM_REJECTED 1644L
//
// MessageId: ERROR_INSTALL_REMOTE_PROHIBITED
//
// MessageText:
//
// The Windows Installer does not permit installation from a Remote Desktop Connection.
//
#define ERROR_INSTALL_REMOTE_PROHIBITED 1645L
// End of MSI error codes
///////////////////////////
// //
// RPC Status Codes //
// //
///////////////////////////
//
// MessageId: RPC_S_INVALID_STRING_BINDING
//
// MessageText:
//
// The string binding is invalid.
//
#define RPC_S_INVALID_STRING_BINDING 1700L
//
// MessageId: RPC_S_WRONG_KIND_OF_BINDING
//
// MessageText:
//
// The binding handle is not the correct type.
//
#define RPC_S_WRONG_KIND_OF_BINDING 1701L
//
// MessageId: RPC_S_INVALID_BINDING
//
// MessageText:
//
// The binding handle is invalid.
//
#define RPC_S_INVALID_BINDING 1702L
//
// MessageId: RPC_S_PROTSEQ_NOT_SUPPORTED
//
// MessageText:
//
// The RPC protocol sequence is not supported.
//
#define RPC_S_PROTSEQ_NOT_SUPPORTED 1703L
//
// MessageId: RPC_S_INVALID_RPC_PROTSEQ
//
// MessageText:
//
// The RPC protocol sequence is invalid.
//
#define RPC_S_INVALID_RPC_PROTSEQ 1704L
//
// MessageId: RPC_S_INVALID_STRING_UUID
//
// MessageText:
//
// The string universal unique identifier (UUID) is invalid.
//
#define RPC_S_INVALID_STRING_UUID 1705L
//
// MessageId: RPC_S_INVALID_ENDPOINT_FORMAT
//
// MessageText:
//
// The endpoint format is invalid.
//
#define RPC_S_INVALID_ENDPOINT_FORMAT 1706L
//
// MessageId: RPC_S_INVALID_NET_ADDR
//
// MessageText:
//
// The network address is invalid.
//
#define RPC_S_INVALID_NET_ADDR 1707L
//
// MessageId: RPC_S_NO_ENDPOINT_FOUND
//
// MessageText:
//
// No endpoint was found.
//
#define RPC_S_NO_ENDPOINT_FOUND 1708L
//
// MessageId: RPC_S_INVALID_TIMEOUT
//
// MessageText:
//
// The timeout value is invalid.
//
#define RPC_S_INVALID_TIMEOUT 1709L
//
// MessageId: RPC_S_OBJECT_NOT_FOUND
//
// MessageText:
//
// The object universal unique identifier (UUID) was not found.
//
#define RPC_S_OBJECT_NOT_FOUND 1710L
//
// MessageId: RPC_S_ALREADY_REGISTERED
//
// MessageText:
//
// The object universal unique identifier (UUID) has already been registered.
//
#define RPC_S_ALREADY_REGISTERED 1711L
//
// MessageId: RPC_S_TYPE_ALREADY_REGISTERED
//
// MessageText:
//
// The type universal unique identifier (UUID) has already been registered.
//
#define RPC_S_TYPE_ALREADY_REGISTERED 1712L
//
// MessageId: RPC_S_ALREADY_LISTENING
//
// MessageText:
//
// The RPC server is already listening.
//
#define RPC_S_ALREADY_LISTENING 1713L
//
// MessageId: RPC_S_NO_PROTSEQS_REGISTERED
//
// MessageText:
//
// No protocol sequences have been registered.
//
#define RPC_S_NO_PROTSEQS_REGISTERED 1714L
//
// MessageId: RPC_S_NOT_LISTENING
//
// MessageText:
//
// The RPC server is not listening.
//
#define RPC_S_NOT_LISTENING 1715L
//
// MessageId: RPC_S_UNKNOWN_MGR_TYPE
//
// MessageText:
//
// The manager type is unknown.
//
#define RPC_S_UNKNOWN_MGR_TYPE 1716L
//
// MessageId: RPC_S_UNKNOWN_IF
//
// MessageText:
//
// The interface is unknown.
//
#define RPC_S_UNKNOWN_IF 1717L
//
// MessageId: RPC_S_NO_BINDINGS
//
// MessageText:
//
// There are no bindings.
//
#define RPC_S_NO_BINDINGS 1718L
//
// MessageId: RPC_S_NO_PROTSEQS
//
// MessageText:
//
// There are no protocol sequences.
//
#define RPC_S_NO_PROTSEQS 1719L
//
// MessageId: RPC_S_CANT_CREATE_ENDPOINT
//
// MessageText:
//
// The endpoint cannot be created.
//
#define RPC_S_CANT_CREATE_ENDPOINT 1720L
//
// MessageId: RPC_S_OUT_OF_RESOURCES
//
// MessageText:
//
// Not enough resources are available to complete this operation.
//
#define RPC_S_OUT_OF_RESOURCES 1721L
//
// MessageId: RPC_S_SERVER_UNAVAILABLE
//
// MessageText:
//
// The RPC server is unavailable.
//
#define RPC_S_SERVER_UNAVAILABLE 1722L
//
// MessageId: RPC_S_SERVER_TOO_BUSY
//
// MessageText:
//
// The RPC server is too busy to complete this operation.
//
#define RPC_S_SERVER_TOO_BUSY 1723L
//
// MessageId: RPC_S_INVALID_NETWORK_OPTIONS
//
// MessageText:
//
// The network options are invalid.
//
#define RPC_S_INVALID_NETWORK_OPTIONS 1724L
//
// MessageId: RPC_S_NO_CALL_ACTIVE
//
// MessageText:
//
// There are no remote procedure calls active on this thread.
//
#define RPC_S_NO_CALL_ACTIVE 1725L
//
// MessageId: RPC_S_CALL_FAILED
//
// MessageText:
//
// The remote procedure call failed.
//
#define RPC_S_CALL_FAILED 1726L
//
// MessageId: RPC_S_CALL_FAILED_DNE
//
// MessageText:
//
// The remote procedure call failed and did not execute.
//
#define RPC_S_CALL_FAILED_DNE 1727L
//
// MessageId: RPC_S_PROTOCOL_ERROR
//
// MessageText:
//
// A remote procedure call (RPC) protocol error occurred.
//
#define RPC_S_PROTOCOL_ERROR 1728L
//
// MessageId: RPC_S_UNSUPPORTED_TRANS_SYN
//
// MessageText:
//
// The transfer syntax is not supported by the RPC server.
//
#define RPC_S_UNSUPPORTED_TRANS_SYN 1730L
//
// MessageId: RPC_S_UNSUPPORTED_TYPE
//
// MessageText:
//
// The universal unique identifier (UUID) type is not supported.
//
#define RPC_S_UNSUPPORTED_TYPE 1732L
//
// MessageId: RPC_S_INVALID_TAG
//
// MessageText:
//
// The tag is invalid.
//
#define RPC_S_INVALID_TAG 1733L
//
// MessageId: RPC_S_INVALID_BOUND
//
// MessageText:
//
// The array bounds are invalid.
//
#define RPC_S_INVALID_BOUND 1734L
//
// MessageId: RPC_S_NO_ENTRY_NAME
//
// MessageText:
//
// The binding does not contain an entry name.
//
#define RPC_S_NO_ENTRY_NAME 1735L
//
// MessageId: RPC_S_INVALID_NAME_SYNTAX
//
// MessageText:
//
// The name syntax is invalid.
//
#define RPC_S_INVALID_NAME_SYNTAX 1736L
//
// MessageId: RPC_S_UNSUPPORTED_NAME_SYNTAX
//
// MessageText:
//
// The name syntax is not supported.
//
#define RPC_S_UNSUPPORTED_NAME_SYNTAX 1737L
//
// MessageId: RPC_S_UUID_NO_ADDRESS
//
// MessageText:
//
// No network address is available to use to construct a universal unique identifier (UUID).
//
#define RPC_S_UUID_NO_ADDRESS 1739L
//
// MessageId: RPC_S_DUPLICATE_ENDPOINT
//
// MessageText:
//
// The endpoint is a duplicate.
//
#define RPC_S_DUPLICATE_ENDPOINT 1740L
//
// MessageId: RPC_S_UNKNOWN_AUTHN_TYPE
//
// MessageText:
//
// The authentication type is unknown.
//
#define RPC_S_UNKNOWN_AUTHN_TYPE 1741L
//
// MessageId: RPC_S_MAX_CALLS_TOO_SMALL
//
// MessageText:
//
// The maximum number of calls is too small.
//
#define RPC_S_MAX_CALLS_TOO_SMALL 1742L
//
// MessageId: RPC_S_STRING_TOO_LONG
//
// MessageText:
//
// The string is too long.
//
#define RPC_S_STRING_TOO_LONG 1743L
//
// MessageId: RPC_S_PROTSEQ_NOT_FOUND
//
// MessageText:
//
// The RPC protocol sequence was not found.
//
#define RPC_S_PROTSEQ_NOT_FOUND 1744L
//
// MessageId: RPC_S_PROCNUM_OUT_OF_RANGE
//
// MessageText:
//
// The procedure number is out of range.
//
#define RPC_S_PROCNUM_OUT_OF_RANGE 1745L
//
// MessageId: RPC_S_BINDING_HAS_NO_AUTH
//
// MessageText:
//
// The binding does not contain any authentication information.
//
#define RPC_S_BINDING_HAS_NO_AUTH 1746L
//
// MessageId: RPC_S_UNKNOWN_AUTHN_SERVICE
//
// MessageText:
//
// The authentication service is unknown.
//
#define RPC_S_UNKNOWN_AUTHN_SERVICE 1747L
//
// MessageId: RPC_S_UNKNOWN_AUTHN_LEVEL
//
// MessageText:
//
// The authentication level is unknown.
//
#define RPC_S_UNKNOWN_AUTHN_LEVEL 1748L
//
// MessageId: RPC_S_INVALID_AUTH_IDENTITY
//
// MessageText:
//
// The security context is invalid.
//
#define RPC_S_INVALID_AUTH_IDENTITY 1749L
//
// MessageId: RPC_S_UNKNOWN_AUTHZ_SERVICE
//
// MessageText:
//
// The authorization service is unknown.
//
#define RPC_S_UNKNOWN_AUTHZ_SERVICE 1750L
//
// MessageId: EPT_S_INVALID_ENTRY
//
// MessageText:
//
// The entry is invalid.
//
#define EPT_S_INVALID_ENTRY 1751L
//
// MessageId: EPT_S_CANT_PERFORM_OP
//
// MessageText:
//
// The server endpoint cannot perform the operation.
//
#define EPT_S_CANT_PERFORM_OP 1752L
//
// MessageId: EPT_S_NOT_REGISTERED
//
// MessageText:
//
// There are no more endpoints available from the endpoint mapper.
//
#define EPT_S_NOT_REGISTERED 1753L
//
// MessageId: RPC_S_NOTHING_TO_EXPORT
//
// MessageText:
//
// No interfaces have been exported.
//
#define RPC_S_NOTHING_TO_EXPORT 1754L
//
// MessageId: RPC_S_INCOMPLETE_NAME
//
// MessageText:
//
// The entry name is incomplete.
//
#define RPC_S_INCOMPLETE_NAME 1755L
//
// MessageId: RPC_S_INVALID_VERS_OPTION
//
// MessageText:
//
// The version option is invalid.
//
#define RPC_S_INVALID_VERS_OPTION 1756L
//
// MessageId: RPC_S_NO_MORE_MEMBERS
//
// MessageText:
//
// There are no more members.
//
#define RPC_S_NO_MORE_MEMBERS 1757L
//
// MessageId: RPC_S_NOT_ALL_OBJS_UNEXPORTED
//
// MessageText:
//
// There is nothing to unexport.
//
#define RPC_S_NOT_ALL_OBJS_UNEXPORTED 1758L
//
// MessageId: RPC_S_INTERFACE_NOT_FOUND
//
// MessageText:
//
// The interface was not found.
//
#define RPC_S_INTERFACE_NOT_FOUND 1759L
//
// MessageId: RPC_S_ENTRY_ALREADY_EXISTS
//
// MessageText:
//
// The entry already exists.
//
#define RPC_S_ENTRY_ALREADY_EXISTS 1760L
//
// MessageId: RPC_S_ENTRY_NOT_FOUND
//
// MessageText:
//
// The entry is not found.
//
#define RPC_S_ENTRY_NOT_FOUND 1761L
//
// MessageId: RPC_S_NAME_SERVICE_UNAVAILABLE
//
// MessageText:
//
// The name service is unavailable.
//
#define RPC_S_NAME_SERVICE_UNAVAILABLE 1762L
//
// MessageId: RPC_S_INVALID_NAF_ID
//
// MessageText:
//
// The network address family is invalid.
//
#define RPC_S_INVALID_NAF_ID 1763L
//
// MessageId: RPC_S_CANNOT_SUPPORT
//
// MessageText:
//
// The requested operation is not supported.
//
#define RPC_S_CANNOT_SUPPORT 1764L
//
// MessageId: RPC_S_NO_CONTEXT_AVAILABLE
//
// MessageText:
//
// No security context is available to allow impersonation.
//
#define RPC_S_NO_CONTEXT_AVAILABLE 1765L
//
// MessageId: RPC_S_INTERNAL_ERROR
//
// MessageText:
//
// An internal error occurred in a remote procedure call (RPC).
//
#define RPC_S_INTERNAL_ERROR 1766L
//
// MessageId: RPC_S_ZERO_DIVIDE
//
// MessageText:
//
// The RPC server attempted an integer division by zero.
//
#define RPC_S_ZERO_DIVIDE 1767L
//
// MessageId: RPC_S_ADDRESS_ERROR
//
// MessageText:
//
// An addressing error occurred in the RPC server.
//
#define RPC_S_ADDRESS_ERROR 1768L
//
// MessageId: RPC_S_FP_DIV_ZERO
//
// MessageText:
//
// A floating-point operation at the RPC server caused a division by zero.
//
#define RPC_S_FP_DIV_ZERO 1769L
//
// MessageId: RPC_S_FP_UNDERFLOW
//
// MessageText:
//
// A floating-point underflow occurred at the RPC server.
//
#define RPC_S_FP_UNDERFLOW 1770L
//
// MessageId: RPC_S_FP_OVERFLOW
//
// MessageText:
//
// A floating-point overflow occurred at the RPC server.
//
#define RPC_S_FP_OVERFLOW 1771L
//
// MessageId: RPC_X_NO_MORE_ENTRIES
//
// MessageText:
//
// The list of RPC servers available for the binding of auto handles has been exhausted.
//
#define RPC_X_NO_MORE_ENTRIES 1772L
//
// MessageId: RPC_X_SS_CHAR_TRANS_OPEN_FAIL
//
// MessageText:
//
// Unable to open the character translation table file.
//
#define RPC_X_SS_CHAR_TRANS_OPEN_FAIL 1773L
//
// MessageId: RPC_X_SS_CHAR_TRANS_SHORT_FILE
//
// MessageText:
//
// The file containing the character translation table has fewer than 512 bytes.
//
#define RPC_X_SS_CHAR_TRANS_SHORT_FILE 1774L
//
// MessageId: RPC_X_SS_IN_NULL_CONTEXT
//
// MessageText:
//
// A null context handle was passed from the client to the host during a remote procedure call.
//
#define RPC_X_SS_IN_NULL_CONTEXT 1775L
//
// MessageId: RPC_X_SS_CONTEXT_DAMAGED
//
// MessageText:
//
// The context handle changed during a remote procedure call.
//
#define RPC_X_SS_CONTEXT_DAMAGED 1777L
//
// MessageId: RPC_X_SS_HANDLES_MISMATCH
//
// MessageText:
//
// The binding handles passed to a remote procedure call do not match.
//
#define RPC_X_SS_HANDLES_MISMATCH 1778L
//
// MessageId: RPC_X_SS_CANNOT_GET_CALL_HANDLE
//
// MessageText:
//
// The stub is unable to get the remote procedure call handle.
//
#define RPC_X_SS_CANNOT_GET_CALL_HANDLE 1779L
//
// MessageId: RPC_X_NULL_REF_POINTER
//
// MessageText:
//
// A null reference pointer was passed to the stub.
//
#define RPC_X_NULL_REF_POINTER 1780L
//
// MessageId: RPC_X_ENUM_VALUE_OUT_OF_RANGE
//
// MessageText:
//
// The enumeration value is out of range.
//
#define RPC_X_ENUM_VALUE_OUT_OF_RANGE 1781L
//
// MessageId: RPC_X_BYTE_COUNT_TOO_SMALL
//
// MessageText:
//
// The byte count is too small.
//
#define RPC_X_BYTE_COUNT_TOO_SMALL 1782L
//
// MessageId: RPC_X_BAD_STUB_DATA
//
// MessageText:
//
// The stub received bad data.
//
#define RPC_X_BAD_STUB_DATA 1783L
//
// MessageId: ERROR_INVALID_USER_BUFFER
//
// MessageText:
//
// The supplied user buffer is not valid for the requested operation.
//
#define ERROR_INVALID_USER_BUFFER 1784L
//
// MessageId: ERROR_UNRECOGNIZED_MEDIA
//
// MessageText:
//
// The disk media is not recognized. It may not be formatted.
//
#define ERROR_UNRECOGNIZED_MEDIA 1785L
//
// MessageId: ERROR_NO_TRUST_LSA_SECRET
//
// MessageText:
//
// The workstation does not have a trust secret.
//
#define ERROR_NO_TRUST_LSA_SECRET 1786L
//
// MessageId: ERROR_NO_TRUST_SAM_ACCOUNT
//
// MessageText:
//
// The security database on the server does not have a computer account for this workstation trust relationship.
//
#define ERROR_NO_TRUST_SAM_ACCOUNT 1787L
//
// MessageId: ERROR_TRUSTED_DOMAIN_FAILURE
//
// MessageText:
//
// The trust relationship between the primary domain and the trusted domain failed.
//
#define ERROR_TRUSTED_DOMAIN_FAILURE 1788L
//
// MessageId: ERROR_TRUSTED_RELATIONSHIP_FAILURE
//
// MessageText:
//
// The trust relationship between this workstation and the primary domain failed.
//
#define ERROR_TRUSTED_RELATIONSHIP_FAILURE 1789L
//
// MessageId: ERROR_TRUST_FAILURE
//
// MessageText:
//
// The network logon failed.
//
#define ERROR_TRUST_FAILURE 1790L
//
// MessageId: RPC_S_CALL_IN_PROGRESS
//
// MessageText:
//
// A remote procedure call is already in progress for this thread.
//
#define RPC_S_CALL_IN_PROGRESS 1791L
//
// MessageId: ERROR_NETLOGON_NOT_STARTED
//
// MessageText:
//
// An attempt was made to logon, but the network logon service was not started.
//
#define ERROR_NETLOGON_NOT_STARTED 1792L
//
// MessageId: ERROR_ACCOUNT_EXPIRED
//
// MessageText:
//
// The user's account has expired.
//
#define ERROR_ACCOUNT_EXPIRED 1793L
//
// MessageId: ERROR_REDIRECTOR_HAS_OPEN_HANDLES
//
// MessageText:
//
// The redirector is in use and cannot be unloaded.
// Logon Failure: The machine you are logging onto is protected by an authentication firewall. The specified account is not allowed to authenticate to the machine.
// The specified print monitor does not have the required functions.
//
#define ERROR_INVALID_PRINT_MONITOR 3007L
//
// MessageId: ERROR_PRINT_MONITOR_IN_USE
//
// MessageText:
//
// The specified print monitor is currently in use.
//
#define ERROR_PRINT_MONITOR_IN_USE 3008L
//
// MessageId: ERROR_PRINTER_HAS_JOBS_QUEUED
//
// MessageText:
//
// The requested operation is not allowed when there are jobs queued to the printer.
//
#define ERROR_PRINTER_HAS_JOBS_QUEUED 3009L
//
// MessageId: ERROR_SUCCESS_REBOOT_REQUIRED
//
// MessageText:
//
// The requested operation is successful. Changes will not be effective until the system is rebooted.
//
#define ERROR_SUCCESS_REBOOT_REQUIRED 3010L
//
// MessageId: ERROR_SUCCESS_RESTART_REQUIRED
//
// MessageText:
//
// The requested operation is successful. Changes will not be effective until the service is restarted.
//
#define ERROR_SUCCESS_RESTART_REQUIRED 3011L
//
// MessageId: ERROR_PRINTER_NOT_FOUND
//
// MessageText:
//
// No printers were found.
//
#define ERROR_PRINTER_NOT_FOUND 3012L
//
// MessageId: ERROR_PRINTER_DRIVER_WARNED
//
// MessageText:
//
// The printer driver is known to be unreliable.
//
#define ERROR_PRINTER_DRIVER_WARNED 3013L
//
// MessageId: ERROR_PRINTER_DRIVER_BLOCKED
//
// MessageText:
//
// The printer driver is known to harm the system.
//
#define ERROR_PRINTER_DRIVER_BLOCKED 3014L
////////////////////////////////////
// //
// Wins Error Codes //
// //
////////////////////////////////////
//
// MessageId: ERROR_WINS_INTERNAL
//
// MessageText:
//
// WINS encountered an error while processing the command.
//
#define ERROR_WINS_INTERNAL 4000L
//
// MessageId: ERROR_CAN_NOT_DEL_LOCAL_WINS
//
// MessageText:
//
// The local WINS can not be deleted.
//
#define ERROR_CAN_NOT_DEL_LOCAL_WINS 4001L
//
// MessageId: ERROR_STATIC_INIT
//
// MessageText:
//
// The importation from the file failed.
//
#define ERROR_STATIC_INIT 4002L
//
// MessageId: ERROR_INC_BACKUP
//
// MessageText:
//
// The backup failed. Was a full backup done before?
//
#define ERROR_INC_BACKUP 4003L
//
// MessageId: ERROR_FULL_BACKUP
//
// MessageText:
//
// The backup failed. Check the directory to which you are backing the database.
//
#define ERROR_FULL_BACKUP 4004L
//
// MessageId: ERROR_REC_NON_EXISTENT
//
// MessageText:
//
// The name does not exist in the WINS database.
//
#define ERROR_REC_NON_EXISTENT 4005L
//
// MessageId: ERROR_RPL_NOT_ALLOWED
//
// MessageText:
//
// Replication with a nonconfigured partner is not allowed.
//
#define ERROR_RPL_NOT_ALLOWED 4006L
////////////////////////////////////
// //
// DHCP Error Codes //
// //
////////////////////////////////////
//
// MessageId: ERROR_DHCP_ADDRESS_CONFLICT
//
// MessageText:
//
// The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address.
//
#define ERROR_DHCP_ADDRESS_CONFLICT 4100L
////////////////////////////////////
// //
// WMI Error Codes //
// //
////////////////////////////////////
//
// MessageId: ERROR_WMI_GUID_NOT_FOUND
//
// MessageText:
//
// The GUID passed was not recognized as valid by a WMI data provider.
//
#define ERROR_WMI_GUID_NOT_FOUND 4200L
//
// MessageId: ERROR_WMI_INSTANCE_NOT_FOUND
//
// MessageText:
//
// The instance name passed was not recognized as valid by a WMI data provider.
//
#define ERROR_WMI_INSTANCE_NOT_FOUND 4201L
//
// MessageId: ERROR_WMI_ITEMID_NOT_FOUND
//
// MessageText:
//
// The data item ID passed was not recognized as valid by a WMI data provider.
//
#define ERROR_WMI_ITEMID_NOT_FOUND 4202L
//
// MessageId: ERROR_WMI_TRY_AGAIN
//
// MessageText:
//
// The WMI request could not be completed and should be retried.
//
#define ERROR_WMI_TRY_AGAIN 4203L
//
// MessageId: ERROR_WMI_DP_NOT_FOUND
//
// MessageText:
//
// The WMI data provider could not be located.
//
#define ERROR_WMI_DP_NOT_FOUND 4204L
//
// MessageId: ERROR_WMI_UNRESOLVED_INSTANCE_REF
//
// MessageText:
//
// The WMI data provider references an instance set that has not been registered.
//
#define ERROR_WMI_UNRESOLVED_INSTANCE_REF 4205L
//
// MessageId: ERROR_WMI_ALREADY_ENABLED
//
// MessageText:
//
// The WMI data block or event notification has already been enabled.
//
#define ERROR_WMI_ALREADY_ENABLED 4206L
//
// MessageId: ERROR_WMI_GUID_DISCONNECTED
//
// MessageText:
//
// The WMI data block is no longer available.
//
#define ERROR_WMI_GUID_DISCONNECTED 4207L
//
// MessageId: ERROR_WMI_SERVER_UNAVAILABLE
//
// MessageText:
//
// The WMI data service is not available.
//
#define ERROR_WMI_SERVER_UNAVAILABLE 4208L
//
// MessageId: ERROR_WMI_DP_FAILED
//
// MessageText:
//
// The WMI data provider failed to carry out the request.
//
#define ERROR_WMI_DP_FAILED 4209L
//
// MessageId: ERROR_WMI_INVALID_MOF
//
// MessageText:
//
// The WMI MOF information is not valid.
//
#define ERROR_WMI_INVALID_MOF 4210L
//
// MessageId: ERROR_WMI_INVALID_REGINFO
//
// MessageText:
//
// The WMI registration information is not valid.
//
#define ERROR_WMI_INVALID_REGINFO 4211L
//
// MessageId: ERROR_WMI_ALREADY_DISABLED
//
// MessageText:
//
// The WMI data block or event notification has already been disabled.
//
#define ERROR_WMI_ALREADY_DISABLED 4212L
//
// MessageId: ERROR_WMI_READ_ONLY
//
// MessageText:
//
// The WMI data item or data block is read only.
//
#define ERROR_WMI_READ_ONLY 4213L
//
// MessageId: ERROR_WMI_SET_FAILURE
//
// MessageText:
//
// The WMI data item or data block could not be changed.
//
#define ERROR_WMI_SET_FAILURE 4214L
//////////////////////////////////////////
// //
// NT Media Services (RSM) Error Codes //
// //
//////////////////////////////////////////
//
// MessageId: ERROR_INVALID_MEDIA
//
// MessageText:
//
// The media identifier does not represent a valid medium.
//
#define ERROR_INVALID_MEDIA 4300L
//
// MessageId: ERROR_INVALID_LIBRARY
//
// MessageText:
//
// The library identifier does not represent a valid library.
//
#define ERROR_INVALID_LIBRARY 4301L
//
// MessageId: ERROR_INVALID_MEDIA_POOL
//
// MessageText:
//
// The media pool identifier does not represent a valid media pool.
//
#define ERROR_INVALID_MEDIA_POOL 4302L
//
// MessageId: ERROR_DRIVE_MEDIA_MISMATCH
//
// MessageText:
//
// The drive and medium are not compatible or exist in different libraries.
//
#define ERROR_DRIVE_MEDIA_MISMATCH 4303L
//
// MessageId: ERROR_MEDIA_OFFLINE
//
// MessageText:
//
// The medium currently exists in an offline library and must be online to perform this operation.
//
#define ERROR_MEDIA_OFFLINE 4304L
//
// MessageId: ERROR_LIBRARY_OFFLINE
//
// MessageText:
//
// The operation cannot be performed on an offline library.
//
#define ERROR_LIBRARY_OFFLINE 4305L
//
// MessageId: ERROR_EMPTY
//
// MessageText:
//
// The library, drive, or media pool is empty.
//
#define ERROR_EMPTY 4306L
//
// MessageId: ERROR_NOT_EMPTY
//
// MessageText:
//
// The library, drive, or media pool must be empty to perform this operation.
//
#define ERROR_NOT_EMPTY 4307L
//
// MessageId: ERROR_MEDIA_UNAVAILABLE
//
// MessageText:
//
// No media is currently available in this media pool or library.
//
#define ERROR_MEDIA_UNAVAILABLE 4308L
//
// MessageId: ERROR_RESOURCE_DISABLED
//
// MessageText:
//
// A resource required for this operation is disabled.
//
#define ERROR_RESOURCE_DISABLED 4309L
//
// MessageId: ERROR_INVALID_CLEANER
//
// MessageText:
//
// The media identifier does not represent a valid cleaner.
//
#define ERROR_INVALID_CLEANER 4310L
//
// MessageId: ERROR_UNABLE_TO_CLEAN
//
// MessageText:
//
// The drive cannot be cleaned or does not support cleaning.
//
#define ERROR_UNABLE_TO_CLEAN 4311L
//
// MessageId: ERROR_OBJECT_NOT_FOUND
//
// MessageText:
//
// The object identifier does not represent a valid object.
//
#define ERROR_OBJECT_NOT_FOUND 4312L
//
// MessageId: ERROR_DATABASE_FAILURE
//
// MessageText:
//
// Unable to read from or write to the database.
//
#define ERROR_DATABASE_FAILURE 4313L
//
// MessageId: ERROR_DATABASE_FULL
//
// MessageText:
//
// The database is full.
//
#define ERROR_DATABASE_FULL 4314L
//
// MessageId: ERROR_MEDIA_INCOMPATIBLE
//
// MessageText:
//
// The medium is not compatible with the device or media pool.
//
#define ERROR_MEDIA_INCOMPATIBLE 4315L
//
// MessageId: ERROR_RESOURCE_NOT_PRESENT
//
// MessageText:
//
// The resource required for this operation does not exist.
//
#define ERROR_RESOURCE_NOT_PRESENT 4316L
//
// MessageId: ERROR_INVALID_OPERATION
//
// MessageText:
//
// The operation identifier is not valid.
//
#define ERROR_INVALID_OPERATION 4317L
//
// MessageId: ERROR_MEDIA_NOT_AVAILABLE
//
// MessageText:
//
// The media is not mounted or ready for use.
//
#define ERROR_MEDIA_NOT_AVAILABLE 4318L
//
// MessageId: ERROR_DEVICE_NOT_AVAILABLE
//
// MessageText:
//
// The device is not ready for use.
//
#define ERROR_DEVICE_NOT_AVAILABLE 4319L
//
// MessageId: ERROR_REQUEST_REFUSED
//
// MessageText:
//
// The operator or administrator has refused the request.
//
#define ERROR_REQUEST_REFUSED 4320L
//
// MessageId: ERROR_INVALID_DRIVE_OBJECT
//
// MessageText:
//
// The drive identifier does not represent a valid drive.
//
#define ERROR_INVALID_DRIVE_OBJECT 4321L
//
// MessageId: ERROR_LIBRARY_FULL
//
// MessageText:
//
// Library is full. No slot is available for use.
//
#define ERROR_LIBRARY_FULL 4322L
//
// MessageId: ERROR_MEDIUM_NOT_ACCESSIBLE
//
// MessageText:
//
// The transport cannot access the medium.
//
#define ERROR_MEDIUM_NOT_ACCESSIBLE 4323L
//
// MessageId: ERROR_UNABLE_TO_LOAD_MEDIUM
//
// MessageText:
//
// Unable to load the medium into the drive.
//
#define ERROR_UNABLE_TO_LOAD_MEDIUM 4324L
//
// MessageId: ERROR_UNABLE_TO_INVENTORY_DRIVE
//
// MessageText:
//
// Unable to retrieve the drive status.
//
#define ERROR_UNABLE_TO_INVENTORY_DRIVE 4325L
//
// MessageId: ERROR_UNABLE_TO_INVENTORY_SLOT
//
// MessageText:
//
// Unable to retrieve the slot status.
//
#define ERROR_UNABLE_TO_INVENTORY_SLOT 4326L
//
// MessageId: ERROR_UNABLE_TO_INVENTORY_TRANSPORT
//
// MessageText:
//
// Unable to retrieve status about the transport.
//
#define ERROR_UNABLE_TO_INVENTORY_TRANSPORT 4327L
//
// MessageId: ERROR_TRANSPORT_FULL
//
// MessageText:
//
// Cannot use the transport because it is already in use.
//
#define ERROR_TRANSPORT_FULL 4328L
//
// MessageId: ERROR_CONTROLLING_IEPORT
//
// MessageText:
//
// Unable to open or close the inject/eject port.
//
#define ERROR_CONTROLLING_IEPORT 4329L
//
// MessageId: ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA
//
// MessageText:
//
// Unable to eject the medium because it is in a drive.
//
#define ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA 4330L
//
// MessageId: ERROR_CLEANER_SLOT_SET
//
// MessageText:
//
// A cleaner slot is already reserved.
//
#define ERROR_CLEANER_SLOT_SET 4331L
//
// MessageId: ERROR_CLEANER_SLOT_NOT_SET
//
// MessageText:
//
// A cleaner slot is not reserved.
//
#define ERROR_CLEANER_SLOT_NOT_SET 4332L
//
// MessageId: ERROR_CLEANER_CARTRIDGE_SPENT
//
// MessageText:
//
// The cleaner cartridge has performed the maximum number of drive cleanings.
//
#define ERROR_CLEANER_CARTRIDGE_SPENT 4333L
//
// MessageId: ERROR_UNEXPECTED_OMID
//
// MessageText:
//
// Unexpected on-medium identifier.
//
#define ERROR_UNEXPECTED_OMID 4334L
//
// MessageId: ERROR_CANT_DELETE_LAST_ITEM
//
// MessageText:
//
// The last remaining item in this group or resource cannot be deleted.
//
#define ERROR_CANT_DELETE_LAST_ITEM 4335L
//
// MessageId: ERROR_MESSAGE_EXCEEDS_MAX_SIZE
//
// MessageText:
//
// The message provided exceeds the maximum size allowed for this parameter.
//
#define ERROR_MESSAGE_EXCEEDS_MAX_SIZE 4336L
//
// MessageId: ERROR_VOLUME_CONTAINS_SYS_FILES
//
// MessageText:
//
// The volume contains system or paging files.
//
#define ERROR_VOLUME_CONTAINS_SYS_FILES 4337L
//
// MessageId: ERROR_INDIGENOUS_TYPE
//
// MessageText:
//
// The media type cannot be removed from this library since at least one drive in the library reports it can support this media type.
//
#define ERROR_INDIGENOUS_TYPE 4338L
//
// MessageId: ERROR_NO_SUPPORTING_DRIVES
//
// MessageText:
//
// This offline media cannot be mounted on this system since no enabled drives are present which can be used.
//
#define ERROR_NO_SUPPORTING_DRIVES 4339L
//
// MessageId: ERROR_CLEANER_CARTRIDGE_INSTALLED
//
// MessageText:
//
// A cleaner cartridge is present in the tape library.
//
#define ERROR_CLEANER_CARTRIDGE_INSTALLED 4340L
////////////////////////////////////////////
// //
// NT Remote Storage Service Error Codes //
// //
////////////////////////////////////////////
//
// MessageId: ERROR_FILE_OFFLINE
//
// MessageText:
//
// The remote storage service was not able to recall the file.
//
#define ERROR_FILE_OFFLINE 4350L
//
// MessageId: ERROR_REMOTE_STORAGE_NOT_ACTIVE
//
// MessageText:
//
// The remote storage service is not operational at this time.
//
#define ERROR_REMOTE_STORAGE_NOT_ACTIVE 4351L
//
// MessageId: ERROR_REMOTE_STORAGE_MEDIA_ERROR
//
// MessageText:
//
// The remote storage service encountered a media error.
//
#define ERROR_REMOTE_STORAGE_MEDIA_ERROR 4352L
////////////////////////////////////////////
// //
// NT Reparse Points Error Codes //
// //
////////////////////////////////////////////
//
// MessageId: ERROR_NOT_A_REPARSE_POINT
//
// MessageText:
//
// The file or directory is not a reparse point.
//
#define ERROR_NOT_A_REPARSE_POINT 4390L
//
// MessageId: ERROR_REPARSE_ATTRIBUTE_CONFLICT
//
// MessageText:
//
// The reparse point attribute cannot be set because it conflicts with an existing attribute.
//
#define ERROR_REPARSE_ATTRIBUTE_CONFLICT 4391L
//
// MessageId: ERROR_INVALID_REPARSE_DATA
//
// MessageText:
//
// The data present in the reparse point buffer is invalid.
//
#define ERROR_INVALID_REPARSE_DATA 4392L
//
// MessageId: ERROR_REPARSE_TAG_INVALID
//
// MessageText:
//
// The tag present in the reparse point buffer is invalid.
//
#define ERROR_REPARSE_TAG_INVALID 4393L
//
// MessageId: ERROR_REPARSE_TAG_MISMATCH
//
// MessageText:
//
// There is a mismatch between the tag specified in the request and the tag present in the reparse point.
//
//
#define ERROR_REPARSE_TAG_MISMATCH 4394L
////////////////////////////////////////////
// //
// NT Single Instance Store Error Codes //
// //
////////////////////////////////////////////
//
// MessageId: ERROR_VOLUME_NOT_SIS_ENABLED
//
// MessageText:
//
// Single Instance Storage is not available on this volume.
//
#define ERROR_VOLUME_NOT_SIS_ENABLED 4500L
////////////////////////////////////
// //
// Cluster Error Codes //
// //
////////////////////////////////////
//
// MessageId: ERROR_DEPENDENT_RESOURCE_EXISTS
//
// MessageText:
//
// The cluster resource cannot be moved to another group because other resources are dependent on it.
//
#define ERROR_DEPENDENT_RESOURCE_EXISTS 5001L
//
// MessageId: ERROR_DEPENDENCY_NOT_FOUND
//
// MessageText:
//
// The cluster resource dependency cannot be found.
//
#define ERROR_DEPENDENCY_NOT_FOUND 5002L
//
// MessageId: ERROR_DEPENDENCY_ALREADY_EXISTS
//
// MessageText:
//
// The cluster resource cannot be made dependent on the specified resource because it is already dependent.
//
#define ERROR_DEPENDENCY_ALREADY_EXISTS 5003L
//
// MessageId: ERROR_RESOURCE_NOT_ONLINE
//
// MessageText:
//
// The cluster resource is not online.
//
#define ERROR_RESOURCE_NOT_ONLINE 5004L
//
// MessageId: ERROR_HOST_NODE_NOT_AVAILABLE
//
// MessageText:
//
// A cluster node is not available for this operation.
//
#define ERROR_HOST_NODE_NOT_AVAILABLE 5005L
//
// MessageId: ERROR_RESOURCE_NOT_AVAILABLE
//
// MessageText:
//
// The cluster resource is not available.
//
#define ERROR_RESOURCE_NOT_AVAILABLE 5006L
//
// MessageId: ERROR_RESOURCE_NOT_FOUND
//
// MessageText:
//
// The cluster resource could not be found.
//
#define ERROR_RESOURCE_NOT_FOUND 5007L
//
// MessageId: ERROR_SHUTDOWN_CLUSTER
//
// MessageText:
//
// The cluster is being shut down.
//
#define ERROR_SHUTDOWN_CLUSTER 5008L
//
// MessageId: ERROR_CANT_EVICT_ACTIVE_NODE
//
// MessageText:
//
// A cluster node cannot be evicted from the cluster unless the node is down or it is the last node.
//
#define ERROR_CANT_EVICT_ACTIVE_NODE 5009L
//
// MessageId: ERROR_OBJECT_ALREADY_EXISTS
//
// MessageText:
//
// The object already exists.
//
#define ERROR_OBJECT_ALREADY_EXISTS 5010L
//
// MessageId: ERROR_OBJECT_IN_LIST
//
// MessageText:
//
// The object is already in the list.
//
#define ERROR_OBJECT_IN_LIST 5011L
//
// MessageId: ERROR_GROUP_NOT_AVAILABLE
//
// MessageText:
//
// The cluster group is not available for any new requests.
//
#define ERROR_GROUP_NOT_AVAILABLE 5012L
//
// MessageId: ERROR_GROUP_NOT_FOUND
//
// MessageText:
//
// The cluster group could not be found.
//
#define ERROR_GROUP_NOT_FOUND 5013L
//
// MessageId: ERROR_GROUP_NOT_ONLINE
//
// MessageText:
//
// The operation could not be completed because the cluster group is not online.
//
#define ERROR_GROUP_NOT_ONLINE 5014L
//
// MessageId: ERROR_HOST_NODE_NOT_RESOURCE_OWNER
//
// MessageText:
//
// The cluster node is not the owner of the resource.
//
#define ERROR_HOST_NODE_NOT_RESOURCE_OWNER 5015L
//
// MessageId: ERROR_HOST_NODE_NOT_GROUP_OWNER
//
// MessageText:
//
// The cluster node is not the owner of the group.
//
#define ERROR_HOST_NODE_NOT_GROUP_OWNER 5016L
//
// MessageId: ERROR_RESMON_CREATE_FAILED
//
// MessageText:
//
// The cluster resource could not be created in the specified resource monitor.
//
#define ERROR_RESMON_CREATE_FAILED 5017L
//
// MessageId: ERROR_RESMON_ONLINE_FAILED
//
// MessageText:
//
// The cluster resource could not be brought online by the resource monitor.
//
#define ERROR_RESMON_ONLINE_FAILED 5018L
//
// MessageId: ERROR_RESOURCE_ONLINE
//
// MessageText:
//
// The operation could not be completed because the cluster resource is online.
//
#define ERROR_RESOURCE_ONLINE 5019L
//
// MessageId: ERROR_QUORUM_RESOURCE
//
// MessageText:
//
// The cluster resource could not be deleted or brought offline because it is the quorum resource.
//
#define ERROR_QUORUM_RESOURCE 5020L
//
// MessageId: ERROR_NOT_QUORUM_CAPABLE
//
// MessageText:
//
// The cluster could not make the specified resource a quorum resource because it is not capable of being a quorum resource.
//
#define ERROR_NOT_QUORUM_CAPABLE 5021L
//
// MessageId: ERROR_CLUSTER_SHUTTING_DOWN
//
// MessageText:
//
// The cluster software is shutting down.
//
#define ERROR_CLUSTER_SHUTTING_DOWN 5022L
//
// MessageId: ERROR_INVALID_STATE
//
// MessageText:
//
// The group or resource is not in the correct state to perform the requested operation.
//
#define ERROR_INVALID_STATE 5023L
//
// MessageId: ERROR_RESOURCE_PROPERTIES_STORED
//
// MessageText:
//
// The properties were stored but not all changes will take effect until the next time the resource is brought online.
//
#define ERROR_RESOURCE_PROPERTIES_STORED 5024L
//
// MessageId: ERROR_NOT_QUORUM_CLASS
//
// MessageText:
//
// The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.
//
#define ERROR_NOT_QUORUM_CLASS 5025L
//
// MessageId: ERROR_CORE_RESOURCE
//
// MessageText:
//
// The cluster resource could not be deleted since it is a core resource.
//
#define ERROR_CORE_RESOURCE 5026L
//
// MessageId: ERROR_QUORUM_RESOURCE_ONLINE_FAILED
//
// MessageText:
//
// The quorum resource failed to come online.
//
#define ERROR_QUORUM_RESOURCE_ONLINE_FAILED 5027L
//
// MessageId: ERROR_QUORUMLOG_OPEN_FAILED
//
// MessageText:
//
// The quorum log could not be created or mounted successfully.
// The cluster node is already a member of the cluster.
//
#define ERROR_CLUSTER_NODE_ALREADY_MEMBER 5065L
//
// MessageId: ERROR_CLUSTER_LAST_INTERNAL_NETWORK
//
// MessageText:
//
// The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.
// This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list.
//
#define ERROR_INVALID_OPERATION_ON_QUORUM 5068L
//
// MessageId: ERROR_DEPENDENCY_NOT_ALLOWED
//
// MessageText:
//
// The cluster quorum resource is not allowed to have any dependencies.
//
#define ERROR_DEPENDENCY_NOT_ALLOWED 5069L
//
// MessageId: ERROR_CLUSTER_NODE_PAUSED
//
// MessageText:
//
// The cluster node is paused.
//
#define ERROR_CLUSTER_NODE_PAUSED 5070L
//
// MessageId: ERROR_NODE_CANT_HOST_RESOURCE
//
// MessageText:
//
// The cluster resource cannot be brought online. The owner node cannot run this resource.
//
#define ERROR_NODE_CANT_HOST_RESOURCE 5071L
//
// MessageId: ERROR_CLUSTER_NODE_NOT_READY
//
// MessageText:
//
// The cluster node is not ready to perform the requested operation.
//
#define ERROR_CLUSTER_NODE_NOT_READY 5072L
//
// MessageId: ERROR_CLUSTER_NODE_SHUTTING_DOWN
//
// MessageText:
//
// The cluster node is shutting down.
//
#define ERROR_CLUSTER_NODE_SHUTTING_DOWN 5073L
//
// MessageId: ERROR_CLUSTER_JOIN_ABORTED
//
// MessageText:
//
// The cluster join operation was aborted.
//
#define ERROR_CLUSTER_JOIN_ABORTED 5074L
//
// MessageId: ERROR_CLUSTER_INCOMPATIBLE_VERSIONS
//
// MessageText:
//
// The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.
// The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.
//
#define ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED 5079L
//
// MessageId: ERROR_CLUSTER_RESNAME_NOT_FOUND
//
// MessageText:
//
// The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL.
// You cannot bring the group online because the owner of the group is not in the preferred list for the group. To change the owner node for the group, move the group.
//
#define ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST 5082L
//
// MessageId: ERROR_CLUSTER_DATABASE_SEQMISMATCH
//
// MessageText:
//
// The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join.
//
#define ERROR_CLUSTER_DATABASE_SEQMISMATCH 5083L
//
// MessageId: ERROR_RESMON_INVALID_STATE
//
// MessageText:
//
// The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state.
//
#define ERROR_RESMON_INVALID_STATE 5084L
//
// MessageId: ERROR_CLUSTER_GUM_NOT_LOCKER
//
// MessageText:
//
// A non locker code got a request to reserve the lock for making global updates.
//
#define ERROR_CLUSTER_GUM_NOT_LOCKER 5085L
//
// MessageId: ERROR_QUORUM_DISK_NOT_FOUND
//
// MessageText:
//
// The quorum disk could not be located by the cluster service.
//
#define ERROR_QUORUM_DISK_NOT_FOUND 5086L
//
// MessageId: ERROR_DATABASE_BACKUP_CORRUPT
//
// MessageText:
//
// The backed up cluster database is possibly corrupt.
// The cluster node was evicted from the cluster successfully, but the node was not cleaned up. Extended status information explaining why the node was not cleaned up is available.
//
#define ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP 5896L
//
// MessageId: ERROR_CLUSTER_PARAMETER_MISMATCH
//
// MessageText:
//
// Two or more parameter values specified for a resource's properties are in conflict.
//
#define ERROR_CLUSTER_PARAMETER_MISMATCH 5897L
//
// MessageId: ERROR_NODE_CANNOT_BE_CLUSTERED
//
// MessageText:
//
// This computer cannot be made a member of a cluster.
//
#define ERROR_NODE_CANNOT_BE_CLUSTERED 5898L
//
// MessageId: ERROR_CLUSTER_WRONG_OS_VERSION
//
// MessageText:
//
// This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed.
// The Task Scheduler service must be configured to run in the System account to function properly. Individual tasks may be configured to run in other accounts.
//
#define SCHED_E_SERVICE_NOT_LOCALSYSTEM 6200L
////////////////////////////////////
// //
// Terminal Server Error Codes //
// //
////////////////////////////////////
//
// MessageId: ERROR_CTX_WINSTATION_NAME_INVALID
//
// MessageText:
//
// The specified session name is invalid.
//
#define ERROR_CTX_WINSTATION_NAME_INVALID 7001L
//
// MessageId: ERROR_CTX_INVALID_PD
//
// MessageText:
//
// The specified protocol driver is invalid.
//
#define ERROR_CTX_INVALID_PD 7002L
//
// MessageId: ERROR_CTX_PD_NOT_FOUND
//
// MessageText:
//
// The specified protocol driver was not found in the system path.
//
#define ERROR_CTX_PD_NOT_FOUND 7003L
//
// MessageId: ERROR_CTX_WD_NOT_FOUND
//
// MessageText:
//
// The specified terminal connection driver was not found in the system path.
// Busy signal detected at remote site on callback.
//
#define ERROR_CTX_MODEM_RESPONSE_BUSY 7015L
//
// MessageId: ERROR_CTX_MODEM_RESPONSE_VOICE
//
// MessageText:
//
// Voice detected at remote site on callback.
//
#define ERROR_CTX_MODEM_RESPONSE_VOICE 7016L
//
// MessageId: ERROR_CTX_TD_ERROR
//
// MessageText:
//
// Transport driver error
//
#define ERROR_CTX_TD_ERROR 7017L
//
// MessageId: ERROR_CTX_WINSTATION_NOT_FOUND
//
// MessageText:
//
// The specified session cannot be found.
//
#define ERROR_CTX_WINSTATION_NOT_FOUND 7022L
//
// MessageId: ERROR_CTX_WINSTATION_ALREADY_EXISTS
//
// MessageText:
//
// The specified session name is already in use.
//
#define ERROR_CTX_WINSTATION_ALREADY_EXISTS 7023L
//
// MessageId: ERROR_CTX_WINSTATION_BUSY
//
// MessageText:
//
// The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.
//
#define ERROR_CTX_WINSTATION_BUSY 7024L
//
// MessageId: ERROR_CTX_BAD_VIDEO_MODE
//
// MessageText:
//
// An attempt has been made to connect to a session whose video mode is not supported by the current client.
//
#define ERROR_CTX_BAD_VIDEO_MODE 7025L
//
// MessageId: ERROR_CTX_GRAPHICS_INVALID
//
// MessageText:
//
// The application attempted to enable DOS graphics mode.
// DOS graphics mode is not supported.
//
#define ERROR_CTX_GRAPHICS_INVALID 7035L
//
// MessageId: ERROR_CTX_LOGON_DISABLED
//
// MessageText:
//
// Your interactive logon privilege has been disabled.
// Please contact your administrator.
//
#define ERROR_CTX_LOGON_DISABLED 7037L
//
// MessageId: ERROR_CTX_NOT_CONSOLE
//
// MessageText:
//
// The requested operation can be performed only on the system console.
// This is most often the result of a driver or system DLL requiring direct console access.
//
#define ERROR_CTX_NOT_CONSOLE 7038L
//
// MessageId: ERROR_CTX_CLIENT_QUERY_TIMEOUT
//
// MessageText:
//
// The client failed to respond to the server connect message.
//
#define ERROR_CTX_CLIENT_QUERY_TIMEOUT 7040L
//
// MessageId: ERROR_CTX_CONSOLE_DISCONNECT
//
// MessageText:
//
// Disconnecting the console session is not supported.
//
#define ERROR_CTX_CONSOLE_DISCONNECT 7041L
//
// MessageId: ERROR_CTX_CONSOLE_CONNECT
//
// MessageText:
//
// Reconnecting a disconnected session to the console is not supported.
//
#define ERROR_CTX_CONSOLE_CONNECT 7042L
//
// MessageId: ERROR_CTX_SHADOW_DENIED
//
// MessageText:
//
// The request to control another session remotely was denied.
//
#define ERROR_CTX_SHADOW_DENIED 7044L
//
// MessageId: ERROR_CTX_WINSTATION_ACCESS_DENIED
//
// MessageText:
//
// The requested session access is denied.
//
#define ERROR_CTX_WINSTATION_ACCESS_DENIED 7045L
//
// MessageId: ERROR_CTX_INVALID_WD
//
// MessageText:
//
// The specified terminal connection driver is invalid.
//
#define ERROR_CTX_INVALID_WD 7049L
//
// MessageId: ERROR_CTX_SHADOW_INVALID
//
// MessageText:
//
// The requested session cannot be controlled remotely.
// This may be because the session is disconnected or does not currently have a user logged on.
//
#define ERROR_CTX_SHADOW_INVALID 7050L
//
// MessageId: ERROR_CTX_SHADOW_DISABLED
//
// MessageText:
//
// The requested session is not configured to allow remote control.
//
#define ERROR_CTX_SHADOW_DISABLED 7051L
//
// MessageId: ERROR_CTX_CLIENT_LICENSE_IN_USE
//
// MessageText:
//
// Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number is currently being used by another user.
// Please call your system administrator to obtain a unique license number.
//
#define ERROR_CTX_CLIENT_LICENSE_IN_USE 7052L
//
// MessageId: ERROR_CTX_CLIENT_LICENSE_NOT_SET
//
// MessageText:
//
// Your request to connect to this Terminal Server has been rejected. Your Terminal Server client license number has not been entered for this copy of the Terminal Server client.
// Please contact your system administrator.
//
#define ERROR_CTX_CLIENT_LICENSE_NOT_SET 7053L
//
// MessageId: ERROR_CTX_LICENSE_NOT_AVAILABLE
//
// MessageText:
//
// The system has reached its licensed logon limit.
// Please try again later.
//
#define ERROR_CTX_LICENSE_NOT_AVAILABLE 7054L
//
// MessageId: ERROR_CTX_LICENSE_CLIENT_INVALID
//
// MessageText:
//
// The client you are using is not licensed to use this system. Your logon request is denied.
//
#define ERROR_CTX_LICENSE_CLIENT_INVALID 7055L
//
// MessageId: ERROR_CTX_LICENSE_EXPIRED
//
// MessageText:
//
// The system license has expired. Your logon request is denied.
//
#define ERROR_CTX_LICENSE_EXPIRED 7056L
//
// MessageId: ERROR_CTX_SHADOW_NOT_RUNNING
//
// MessageText:
//
// Remote control could not be terminated because the specified session is not currently being remotely controlled.
// The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.
// Schema update failed: range-lower less than range upper.
//
#define ERROR_DS_SEMANTIC_ATT_TEST 8383L
//
// MessageId: ERROR_DS_SYNTAX_MISMATCH
//
// MessageText:
//
// Schema update failed: syntax mismatch.
//
#define ERROR_DS_SYNTAX_MISMATCH 8384L
//
// MessageId: ERROR_DS_EXISTS_IN_MUST_HAVE
//
// MessageText:
//
// Schema deletion failed: attribute is used in must-contain.
//
#define ERROR_DS_EXISTS_IN_MUST_HAVE 8385L
//
// MessageId: ERROR_DS_EXISTS_IN_MAY_HAVE
//
// MessageText:
//
// Schema deletion failed: attribute is used in may-contain.
//
#define ERROR_DS_EXISTS_IN_MAY_HAVE 8386L
//
// MessageId: ERROR_DS_NONEXISTENT_MAY_HAVE
//
// MessageText:
//
// Schema update failed: attribute in may-contain does not exist.
//
#define ERROR_DS_NONEXISTENT_MAY_HAVE 8387L
//
// MessageId: ERROR_DS_NONEXISTENT_MUST_HAVE
//
// MessageText:
//
// Schema update failed: attribute in must-contain does not exist.
//
#define ERROR_DS_NONEXISTENT_MUST_HAVE 8388L
//
// MessageId: ERROR_DS_AUX_CLS_TEST_FAIL
//
// MessageText:
//
// Schema update failed: class in aux-class list does not exist or is not an auxiliary class.
//
#define ERROR_DS_AUX_CLS_TEST_FAIL 8389L
//
// MessageId: ERROR_DS_NONEXISTENT_POSS_SUP
//
// MessageText:
//
// Schema update failed: class in poss-superiors does not exist.
//
#define ERROR_DS_NONEXISTENT_POSS_SUP 8390L
//
// MessageId: ERROR_DS_SUB_CLS_TEST_FAIL
//
// MessageText:
//
// Schema update failed: class in subclassof list does not exist or does not satisfy hierarchy rules.
//
#define ERROR_DS_SUB_CLS_TEST_FAIL 8391L
//
// MessageId: ERROR_DS_BAD_RDN_ATT_ID_SYNTAX
//
// MessageText:
//
// Schema update failed: Rdn-Att-Id has wrong syntax.
//
#define ERROR_DS_BAD_RDN_ATT_ID_SYNTAX 8392L
//
// MessageId: ERROR_DS_EXISTS_IN_AUX_CLS
//
// MessageText:
//
// Schema deletion failed: class is used as auxiliary class.
//
#define ERROR_DS_EXISTS_IN_AUX_CLS 8393L
//
// MessageId: ERROR_DS_EXISTS_IN_SUB_CLS
//
// MessageText:
//
// Schema deletion failed: class is used as sub class.
//
#define ERROR_DS_EXISTS_IN_SUB_CLS 8394L
//
// MessageId: ERROR_DS_EXISTS_IN_POSS_SUP
//
// MessageText:
//
// Schema deletion failed: class is used as poss superior.
//
#define ERROR_DS_EXISTS_IN_POSS_SUP 8395L
//
// MessageId: ERROR_DS_RECALCSCHEMA_FAILED
//
// MessageText:
//
// Schema update failed in recalculating validation cache.
//
#define ERROR_DS_RECALCSCHEMA_FAILED 8396L
//
// MessageId: ERROR_DS_TREE_DELETE_NOT_FINISHED
//
// MessageText:
//
// The tree deletion is not finished. The request must be made again to continue deleting the tree.
//
#define ERROR_DS_TREE_DELETE_NOT_FINISHED 8397L
//
// MessageId: ERROR_DS_CANT_DELETE
//
// MessageText:
//
// The requested delete operation could not be performed.
//
#define ERROR_DS_CANT_DELETE 8398L
//
// MessageId: ERROR_DS_ATT_SCHEMA_REQ_ID
//
// MessageText:
//
// Cannot read the governs class identifier for the schema record.
//
#define ERROR_DS_ATT_SCHEMA_REQ_ID 8399L
//
// MessageId: ERROR_DS_BAD_ATT_SCHEMA_SYNTAX
//
// MessageText:
//
// The attribute schema has bad syntax.
//
#define ERROR_DS_BAD_ATT_SCHEMA_SYNTAX 8400L
//
// MessageId: ERROR_DS_CANT_CACHE_ATT
//
// MessageText:
//
// The attribute could not be cached.
//
#define ERROR_DS_CANT_CACHE_ATT 8401L
//
// MessageId: ERROR_DS_CANT_CACHE_CLASS
//
// MessageText:
//
// The class could not be cached.
//
#define ERROR_DS_CANT_CACHE_CLASS 8402L
//
// MessageId: ERROR_DS_CANT_REMOVE_ATT_CACHE
//
// MessageText:
//
// The attribute could not be removed from the cache.
//
#define ERROR_DS_CANT_REMOVE_ATT_CACHE 8403L
//
// MessageId: ERROR_DS_CANT_REMOVE_CLASS_CACHE
//
// MessageText:
//
// The class could not be removed from the cache.
//
#define ERROR_DS_CANT_REMOVE_CLASS_CACHE 8404L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_DN
//
// MessageText:
//
// The distinguished name attribute could not be read.
//
#define ERROR_DS_CANT_RETRIEVE_DN 8405L
//
// MessageId: ERROR_DS_MISSING_SUPREF
//
// MessageText:
//
// No superior reference has been configured for the directory service. The directory service is therefore unable to issue referrals to objects outside this forest.
//
#define ERROR_DS_MISSING_SUPREF 8406L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_INSTANCE
//
// MessageText:
//
// The instance type attribute could not be retrieved.
//
#define ERROR_DS_CANT_RETRIEVE_INSTANCE 8407L
//
// MessageId: ERROR_DS_CODE_INCONSISTENCY
//
// MessageText:
//
// An internal error has occurred.
//
#define ERROR_DS_CODE_INCONSISTENCY 8408L
//
// MessageId: ERROR_DS_DATABASE_ERROR
//
// MessageText:
//
// A database error has occurred.
//
#define ERROR_DS_DATABASE_ERROR 8409L
//
// MessageId: ERROR_DS_GOVERNSID_MISSING
//
// MessageText:
//
// The attribute GOVERNSID is missing.
//
#define ERROR_DS_GOVERNSID_MISSING 8410L
//
// MessageId: ERROR_DS_MISSING_EXPECTED_ATT
//
// MessageText:
//
// An expected attribute is missing.
//
#define ERROR_DS_MISSING_EXPECTED_ATT 8411L
//
// MessageId: ERROR_DS_NCNAME_MISSING_CR_REF
//
// MessageText:
//
// The specified naming context is missing a cross reference.
//
#define ERROR_DS_NCNAME_MISSING_CR_REF 8412L
//
// MessageId: ERROR_DS_SECURITY_CHECKING_ERROR
//
// MessageText:
//
// A security checking error has occurred.
//
#define ERROR_DS_SECURITY_CHECKING_ERROR 8413L
//
// MessageId: ERROR_DS_SCHEMA_NOT_LOADED
//
// MessageText:
//
// The schema is not loaded.
//
#define ERROR_DS_SCHEMA_NOT_LOADED 8414L
//
// MessageId: ERROR_DS_SCHEMA_ALLOC_FAILED
//
// MessageText:
//
// Schema allocation failed. Please check if the machine is running low on memory.
//
#define ERROR_DS_SCHEMA_ALLOC_FAILED 8415L
//
// MessageId: ERROR_DS_ATT_SCHEMA_REQ_SYNTAX
//
// MessageText:
//
// Failed to obtain the required syntax for the attribute schema.
//
#define ERROR_DS_ATT_SCHEMA_REQ_SYNTAX 8416L
//
// MessageId: ERROR_DS_GCVERIFY_ERROR
//
// MessageText:
//
// The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available.
//
#define ERROR_DS_GCVERIFY_ERROR 8417L
//
// MessageId: ERROR_DS_DRA_SCHEMA_MISMATCH
//
// MessageText:
//
// The replication operation failed because of a schema mismatch between the servers involved.
//
#define ERROR_DS_DRA_SCHEMA_MISMATCH 8418L
//
// MessageId: ERROR_DS_CANT_FIND_DSA_OBJ
//
// MessageText:
//
// The DSA object could not be found.
//
#define ERROR_DS_CANT_FIND_DSA_OBJ 8419L
//
// MessageId: ERROR_DS_CANT_FIND_EXPECTED_NC
//
// MessageText:
//
// The naming context could not be found.
//
#define ERROR_DS_CANT_FIND_EXPECTED_NC 8420L
//
// MessageId: ERROR_DS_CANT_FIND_NC_IN_CACHE
//
// MessageText:
//
// The naming context could not be found in the cache.
//
#define ERROR_DS_CANT_FIND_NC_IN_CACHE 8421L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_CHILD
//
// MessageText:
//
// The child object could not be retrieved.
//
#define ERROR_DS_CANT_RETRIEVE_CHILD 8422L
//
// MessageId: ERROR_DS_SECURITY_ILLEGAL_MODIFY
//
// MessageText:
//
// The modification was not permitted for security reasons.
//
#define ERROR_DS_SECURITY_ILLEGAL_MODIFY 8423L
//
// MessageId: ERROR_DS_CANT_REPLACE_HIDDEN_REC
//
// MessageText:
//
// The operation cannot replace the hidden record.
// The directory service encountered an internal failure.
//
#define ERROR_DS_INTERNAL_FAILURE 8430L
//
// MessageId: ERROR_DS_UNKNOWN_ERROR
//
// MessageText:
//
// The directory service encountered an unknown failure.
//
#define ERROR_DS_UNKNOWN_ERROR 8431L
//
// MessageId: ERROR_DS_ROOT_REQUIRES_CLASS_TOP
//
// MessageText:
//
// A root object requires a class of 'top'.
//
#define ERROR_DS_ROOT_REQUIRES_CLASS_TOP 8432L
//
// MessageId: ERROR_DS_REFUSING_FSMO_ROLES
//
// MessageText:
//
// This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.
//
#define ERROR_DS_REFUSING_FSMO_ROLES 8433L
//
// MessageId: ERROR_DS_MISSING_FSMO_SETTINGS
//
// MessageText:
//
// The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.
//
#define ERROR_DS_MISSING_FSMO_SETTINGS 8434L
//
// MessageId: ERROR_DS_UNABLE_TO_SURRENDER_ROLES
//
// MessageText:
//
// The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.
//
#define ERROR_DS_UNABLE_TO_SURRENDER_ROLES 8435L
//
// MessageId: ERROR_DS_DRA_GENERIC
//
// MessageText:
//
// The replication operation failed.
//
#define ERROR_DS_DRA_GENERIC 8436L
//
// MessageId: ERROR_DS_DRA_INVALID_PARAMETER
//
// MessageText:
//
// An invalid parameter was specified for this replication operation.
//
#define ERROR_DS_DRA_INVALID_PARAMETER 8437L
//
// MessageId: ERROR_DS_DRA_BUSY
//
// MessageText:
//
// The directory service is too busy to complete the replication operation at this time.
//
#define ERROR_DS_DRA_BUSY 8438L
//
// MessageId: ERROR_DS_DRA_BAD_DN
//
// MessageText:
//
// The distinguished name specified for this replication operation is invalid.
//
#define ERROR_DS_DRA_BAD_DN 8439L
//
// MessageId: ERROR_DS_DRA_BAD_NC
//
// MessageText:
//
// The naming context specified for this replication operation is invalid.
//
#define ERROR_DS_DRA_BAD_NC 8440L
//
// MessageId: ERROR_DS_DRA_DN_EXISTS
//
// MessageText:
//
// The distinguished name specified for this replication operation already exists.
//
#define ERROR_DS_DRA_DN_EXISTS 8441L
//
// MessageId: ERROR_DS_DRA_INTERNAL_ERROR
//
// MessageText:
//
// The replication system encountered an internal error.
//
#define ERROR_DS_DRA_INTERNAL_ERROR 8442L
//
// MessageId: ERROR_DS_DRA_INCONSISTENT_DIT
//
// MessageText:
//
// The replication operation encountered a database inconsistency.
//
#define ERROR_DS_DRA_INCONSISTENT_DIT 8443L
//
// MessageId: ERROR_DS_DRA_CONNECTION_FAILED
//
// MessageText:
//
// The server specified for this replication operation could not be contacted.
//
#define ERROR_DS_DRA_CONNECTION_FAILED 8444L
//
// MessageId: ERROR_DS_DRA_BAD_INSTANCE_TYPE
//
// MessageText:
//
// The replication operation encountered an object with an invalid instance type.
//
#define ERROR_DS_DRA_BAD_INSTANCE_TYPE 8445L
//
// MessageId: ERROR_DS_DRA_OUT_OF_MEM
//
// MessageText:
//
// The replication operation failed to allocate memory.
//
#define ERROR_DS_DRA_OUT_OF_MEM 8446L
//
// MessageId: ERROR_DS_DRA_MAIL_PROBLEM
//
// MessageText:
//
// The replication operation encountered an error with the mail system.
//
#define ERROR_DS_DRA_MAIL_PROBLEM 8447L
//
// MessageId: ERROR_DS_DRA_REF_ALREADY_EXISTS
//
// MessageText:
//
// The replication reference information for the target server already exists.
//
#define ERROR_DS_DRA_REF_ALREADY_EXISTS 8448L
//
// MessageId: ERROR_DS_DRA_REF_NOT_FOUND
//
// MessageText:
//
// The replication reference information for the target server does not exist.
//
#define ERROR_DS_DRA_REF_NOT_FOUND 8449L
//
// MessageId: ERROR_DS_DRA_OBJ_IS_REP_SOURCE
//
// MessageText:
//
// The naming context cannot be removed because it is replicated to another server.
//
#define ERROR_DS_DRA_OBJ_IS_REP_SOURCE 8450L
//
// MessageId: ERROR_DS_DRA_DB_ERROR
//
// MessageText:
//
// The replication operation encountered a database error.
//
#define ERROR_DS_DRA_DB_ERROR 8451L
//
// MessageId: ERROR_DS_DRA_NO_REPLICA
//
// MessageText:
//
// The naming context is in the process of being removed or is not replicated from the specified server.
//
#define ERROR_DS_DRA_NO_REPLICA 8452L
//
// MessageId: ERROR_DS_DRA_ACCESS_DENIED
//
// MessageText:
//
// Replication access was denied.
//
#define ERROR_DS_DRA_ACCESS_DENIED 8453L
//
// MessageId: ERROR_DS_DRA_NOT_SUPPORTED
//
// MessageText:
//
// The requested operation is not supported by this version of the directory service.
//
#define ERROR_DS_DRA_NOT_SUPPORTED 8454L
//
// MessageId: ERROR_DS_DRA_RPC_CANCELLED
//
// MessageText:
//
// The replication remote procedure call was cancelled.
//
#define ERROR_DS_DRA_RPC_CANCELLED 8455L
//
// MessageId: ERROR_DS_DRA_SOURCE_DISABLED
//
// MessageText:
//
// The source server is currently rejecting replication requests.
//
#define ERROR_DS_DRA_SOURCE_DISABLED 8456L
//
// MessageId: ERROR_DS_DRA_SINK_DISABLED
//
// MessageText:
//
// The destination server is currently rejecting replication requests.
//
#define ERROR_DS_DRA_SINK_DISABLED 8457L
//
// MessageId: ERROR_DS_DRA_NAME_COLLISION
//
// MessageText:
//
// The replication operation failed due to a collision of object names.
//
#define ERROR_DS_DRA_NAME_COLLISION 8458L
//
// MessageId: ERROR_DS_DRA_SOURCE_REINSTALLED
//
// MessageText:
//
// The replication source has been reinstalled.
//
#define ERROR_DS_DRA_SOURCE_REINSTALLED 8459L
//
// MessageId: ERROR_DS_DRA_MISSING_PARENT
//
// MessageText:
//
// The replication operation failed because a required parent object is missing.
//
#define ERROR_DS_DRA_MISSING_PARENT 8460L
//
// MessageId: ERROR_DS_DRA_PREEMPTED
//
// MessageText:
//
// The replication operation was preempted.
//
#define ERROR_DS_DRA_PREEMPTED 8461L
//
// MessageId: ERROR_DS_DRA_ABANDON_SYNC
//
// MessageText:
//
// The replication synchronization attempt was abandoned because of a lack of updates.
//
#define ERROR_DS_DRA_ABANDON_SYNC 8462L
//
// MessageId: ERROR_DS_DRA_SHUTDOWN
//
// MessageText:
//
// The replication operation was terminated because the system is shutting down.
// The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.
//
#define ERROR_DS_DRA_EXTN_CONNECTION_FAILED 8466L
//
// MessageId: ERROR_DS_INSTALL_SCHEMA_MISMATCH
//
// MessageText:
//
// The version of the Active Directory schema of the source forest is not compatible with the version of Active Directory on this computer.
//
#define ERROR_DS_INSTALL_SCHEMA_MISMATCH 8467L
//
// MessageId: ERROR_DS_DUP_LINK_ID
//
// MessageText:
//
// Schema update failed: An attribute with the same link identifier already exists.
//
#define ERROR_DS_DUP_LINK_ID 8468L
//
// MessageId: ERROR_DS_NAME_ERROR_RESOLVING
//
// MessageText:
//
// Name translation: Generic processing error.
//
#define ERROR_DS_NAME_ERROR_RESOLVING 8469L
//
// MessageId: ERROR_DS_NAME_ERROR_NOT_FOUND
//
// MessageText:
//
// Name translation: Could not find the name or insufficient right to see name.
//
#define ERROR_DS_NAME_ERROR_NOT_FOUND 8470L
//
// MessageId: ERROR_DS_NAME_ERROR_NOT_UNIQUE
//
// MessageText:
//
// Name translation: Input name mapped to more than one output name.
//
#define ERROR_DS_NAME_ERROR_NOT_UNIQUE 8471L
//
// MessageId: ERROR_DS_NAME_ERROR_NO_MAPPING
//
// MessageText:
//
// Name translation: Input name found, but not the associated output format.
//
#define ERROR_DS_NAME_ERROR_NO_MAPPING 8472L
//
// MessageId: ERROR_DS_NAME_ERROR_DOMAIN_ONLY
//
// MessageText:
//
// Name translation: Unable to resolve completely, only the domain was found.
// Modification of a constructed attribute is not allowed.
//
#define ERROR_DS_CONSTRUCTED_ATT_MOD 8475L
//
// MessageId: ERROR_DS_WRONG_OM_OBJ_CLASS
//
// MessageText:
//
// The OM-Object-Class specified is incorrect for an attribute with the specified syntax.
//
#define ERROR_DS_WRONG_OM_OBJ_CLASS 8476L
//
// MessageId: ERROR_DS_DRA_REPL_PENDING
//
// MessageText:
//
// The replication request has been posted; waiting for reply.
//
#define ERROR_DS_DRA_REPL_PENDING 8477L
//
// MessageId: ERROR_DS_DS_REQUIRED
//
// MessageText:
//
// The requested operation requires a directory service, and none was available.
//
#define ERROR_DS_DS_REQUIRED 8478L
//
// MessageId: ERROR_DS_INVALID_LDAP_DISPLAY_NAME
//
// MessageText:
//
// The LDAP display name of the class or attribute contains non-ASCII characters.
//
#define ERROR_DS_INVALID_LDAP_DISPLAY_NAME 8479L
//
// MessageId: ERROR_DS_NON_BASE_SEARCH
//
// MessageText:
//
// The requested search operation is only supported for base searches.
//
#define ERROR_DS_NON_BASE_SEARCH 8480L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_ATTS
//
// MessageText:
//
// The search failed to retrieve attributes from the database.
//
#define ERROR_DS_CANT_RETRIEVE_ATTS 8481L
//
// MessageId: ERROR_DS_BACKLINK_WITHOUT_LINK
//
// MessageText:
//
// The schema update operation tried to add a backward link attribute that has no corresponding forward link.
//
#define ERROR_DS_BACKLINK_WITHOUT_LINK 8482L
//
// MessageId: ERROR_DS_EPOCH_MISMATCH
//
// MessageText:
//
// Source and destination of a cross-domain move do not agree on the object's epoch number. Either source or destination does not have the latest version of the object.
//
#define ERROR_DS_EPOCH_MISMATCH 8483L
//
// MessageId: ERROR_DS_SRC_NAME_MISMATCH
//
// MessageText:
//
// Source and destination of a cross-domain move do not agree on the object's current name. Either source or destination does not have the latest version of the object.
//
#define ERROR_DS_SRC_NAME_MISMATCH 8484L
//
// MessageId: ERROR_DS_SRC_AND_DST_NC_IDENTICAL
//
// MessageText:
//
// Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation.
//
#define ERROR_DS_SRC_AND_DST_NC_IDENTICAL 8485L
//
// MessageId: ERROR_DS_DST_NC_MISMATCH
//
// MessageText:
//
// Source and destination for a cross-domain move are not in agreement on the naming contexts in the forest. Either source or destination does not have the latest version of the Partitions container.
//
#define ERROR_DS_DST_NC_MISMATCH 8486L
//
// MessageId: ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC
//
// MessageText:
//
// Destination of a cross-domain move is not authoritative for the destination naming context.
//
#define ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC 8487L
//
// MessageId: ERROR_DS_SRC_GUID_MISMATCH
//
// MessageText:
//
// Source and destination of a cross-domain move do not agree on the identity of the source object. Either source or destination does not have the latest version of the source object.
//
#define ERROR_DS_SRC_GUID_MISMATCH 8488L
//
// MessageId: ERROR_DS_CANT_MOVE_DELETED_OBJECT
//
// MessageText:
//
// Object being moved across-domains is already known to be deleted by the destination server. The source server does not have the latest version of the source object.
//
#define ERROR_DS_CANT_MOVE_DELETED_OBJECT 8489L
//
// MessageId: ERROR_DS_PDC_OPERATION_IN_PROGRESS
//
// MessageText:
//
// Another operation which requires exclusive access to the PDC FSMO is already in progress.
//
#define ERROR_DS_PDC_OPERATION_IN_PROGRESS 8490L
//
// MessageId: ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD
//
// MessageText:
//
// A cross-domain move operation failed such that two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state.
// This object may not be moved across domain boundaries either because cross-domain moves for this class are disallowed, or the object has some special characteristics, e.g.: trust account or restricted RID, which prevent its move.
// Can't move objects with memberships across domain boundaries as once moved, this would violate the membership conditions of the account group. Remove the object from any account group memberships and retry.
// A naming context head must be the immediate child of another naming context head, not of an interior node.
//
#define ERROR_DS_NC_MUST_HAVE_NC_PARENT 8494L
//
// MessageId: ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE
//
// MessageText:
//
// The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. (Applies only to Windows 2000 Domain Naming masters)
// Security Accounts Manager initialization failed because of the following error: %1.
// Error Status: 0x%2. Click OK to shut down the system and reboot into Directory Services Restore Mode. Check the event log for detailed information.
//
#define ERROR_DS_SAM_INIT_FAILURE 8504L
//
// MessageId: ERROR_DS_SENSITIVE_GROUP_VIOLATION
//
// MessageText:
//
// Only an administrator can modify the membership list of an administrative group.
//
#define ERROR_DS_SENSITIVE_GROUP_VIOLATION 8505L
//
// MessageId: ERROR_DS_CANT_MOD_PRIMARYGROUPID
//
// MessageText:
//
// Cannot change the primary group ID of a domain controller account.
//
#define ERROR_DS_CANT_MOD_PRIMARYGROUPID 8506L
//
// MessageId: ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD
//
// MessageText:
//
// An attempt is made to modify the base schema.
//
#define ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD 8507L
//
// MessageId: ERROR_DS_NONSAFE_SCHEMA_CHANGE
//
// MessageText:
//
// Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, for example, by adding or deleting an auxiliary class) is not allowed.
//
#define ERROR_DS_NONSAFE_SCHEMA_CHANGE 8508L
//
// MessageId: ERROR_DS_SCHEMA_UPDATE_DISALLOWED
//
// MessageText:
//
// Schema update is not allowed on this DC because the DC is not the schema FSMO Role Owner.
//
#define ERROR_DS_SCHEMA_UPDATE_DISALLOWED 8509L
//
// MessageId: ERROR_DS_CANT_CREATE_UNDER_SCHEMA
//
// MessageText:
//
// An object of this class cannot be created under the schema container. You can only create attribute-schema and class-schema objects under the schema container.
//
#define ERROR_DS_CANT_CREATE_UNDER_SCHEMA 8510L
//
// MessageId: ERROR_DS_INSTALL_NO_SRC_SCH_VERSION
//
// MessageText:
//
// The replica/child install failed to get the objectVersion attribute on the schema container on the source DC. Either the attribute is missing on the schema container or the credentials supplied do not have permission to read it.
// Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers)
//
#define ERROR_DS_NAMING_MASTER_GC 8523L
//
// MessageId: ERROR_DS_DNS_LOOKUP_FAILURE
//
// MessageText:
//
// The DSA operation is unable to proceed because of a DNS lookup failure.
//
#define ERROR_DS_DNS_LOOKUP_FAILURE 8524L
//
// MessageId: ERROR_DS_COULDNT_UPDATE_SPNS
//
// MessageText:
//
// While processing a change to the DNS Host Name for an object, the Service Principal Name values could not be kept in sync.
//
#define ERROR_DS_COULDNT_UPDATE_SPNS 8525L
//
// MessageId: ERROR_DS_CANT_RETRIEVE_SD
//
// MessageText:
//
// The Security Descriptor attribute could not be read.
//
#define ERROR_DS_CANT_RETRIEVE_SD 8526L
//
// MessageId: ERROR_DS_KEY_NOT_UNIQUE
//
// MessageText:
//
// The object requested was not found, but an object with that key was found.
//
#define ERROR_DS_KEY_NOT_UNIQUE 8527L
//
// MessageId: ERROR_DS_WRONG_LINKED_ATT_SYNTAX
//
// MessageText:
//
// The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1
//
#define ERROR_DS_WRONG_LINKED_ATT_SYNTAX 8528L
//
// MessageId: ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD
//
// MessageText:
//
// Security Account Manager needs to get the boot password.
//
#define ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD 8529L
//
// MessageId: ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY
//
// MessageText:
//
// Security Account Manager needs to get the boot key from floppy disk.
// The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.
//
#define ERROR_DS_DRA_OBJ_NC_MISMATCH 8545L
//
// MessageId: ERROR_DS_NC_STILL_HAS_DSAS
//
// MessageText:
//
// The requested domain could not be deleted because there exist domain controllers that still host this domain.
//
#define ERROR_DS_NC_STILL_HAS_DSAS 8546L
//
// MessageId: ERROR_DS_GC_REQUIRED
//
// MessageText:
//
// The requested operation can be performed only on a global catalog server.
//
#define ERROR_DS_GC_REQUIRED 8547L
//
// MessageId: ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY
//
// MessageText:
//
// A local group can only be a member of other local groups in the same domain.
//
#define ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY 8548L
//
// MessageId: ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS
//
// MessageText:
//
// Foreign security principals cannot be members of universal groups.
//
#define ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS 8549L
//
// MessageId: ERROR_DS_CANT_ADD_TO_GC
//
// MessageText:
//
// The attribute is not allowed to be replicated to the GC because of security reasons.
//
#define ERROR_DS_CANT_ADD_TO_GC 8550L
//
// MessageId: ERROR_DS_NO_CHECKPOINT_WITH_PDC
//
// MessageText:
//
// The checkpoint with the PDC could not be taken because there too many modifications being processed currently.
// Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.
// Directory Services could not start because of the following error: %1.
// Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.
//
#define ERROR_DS_INIT_FAILURE_CONSOLE 8561L
//
// MessageId: ERROR_DS_SAM_INIT_FAILURE_CONSOLE
//
// MessageText:
//
// Security Accounts Manager initialization failed because of the following error: %1.
// Error Status: 0x%2. Please click OK to shutdown the system. You can use the recovery console to diagnose the system further.
//
#define ERROR_DS_SAM_INIT_FAILURE_CONSOLE 8562L
//
// MessageId: ERROR_DS_FOREST_VERSION_TOO_HIGH
//
// MessageText:
//
// The version of the operating system installed is incompatible with the current forest functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this forest.
//
#define ERROR_DS_FOREST_VERSION_TOO_HIGH 8563L
//
// MessageId: ERROR_DS_DOMAIN_VERSION_TOO_HIGH
//
// MessageText:
//
// The version of the operating system installed is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain.
//
#define ERROR_DS_DOMAIN_VERSION_TOO_HIGH 8564L
//
// MessageId: ERROR_DS_FOREST_VERSION_TOO_LOW
//
// MessageText:
//
// The version of the operating system installed on this server no longer supports the current forest functional level. You must raise the forest functional level before this server can become a domain controller in this forest.
//
#define ERROR_DS_FOREST_VERSION_TOO_LOW 8565L
//
// MessageId: ERROR_DS_DOMAIN_VERSION_TOO_LOW
//
// MessageText:
//
// The version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain.
//
#define ERROR_DS_DOMAIN_VERSION_TOO_LOW 8566L
//
// MessageId: ERROR_DS_INCOMPATIBLE_VERSION
//
// MessageText:
//
// The version of the operating system installed on this server is incompatible with the functional level of the domain or forest.
//
#define ERROR_DS_INCOMPATIBLE_VERSION 8567L
//
// MessageId: ERROR_DS_LOW_DSA_VERSION
//
// MessageText:
//
// The functional level of the domain (or forest) cannot be raised to the requested value, because there exist one or more domain controllers in the domain (or forest) that are at a lower incompatible functional level.
// The forest functional level cannot be raised to the requested value since one or more domains are still in mixed domain mode. All domains in the forest must be in native mode, for you to raise the forest functional level.
// Could not access a partition of the Active Directory located on a remote server. Make sure at least one server is running for the partition in question.
// The directory cannot validate the proposed naming context (or partition) name because it does not hold a replica nor can it contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properly registered in DNS, and at least one replica of this naming context is reachable by the Domain Naming master.
// The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the corresponding server object in the local DS database has no serverReference attribute.
// The DS cannot derive a service principal name (SPN) with which to mutually authenticate the target server because the server's domain has been deleted from the forest.
// The Directory Service cannot perform the requested operation because a domain rename operation is in progress.
//
#define ERROR_DS_DOMAIN_RENAME_IN_PROGRESS 8612L
//
// MessageId: ERROR_DS_EXISTING_AD_CHILD_NC
//
// MessageText:
//
// The Active Directory detected an Active Directory child partition below the
// requested new partition name. The Active Directory's partition heiarchy must
// be created in a top down method.
//
#define ERROR_DS_EXISTING_AD_CHILD_NC 8613L
//
// MessageId: ERROR_DS_REPL_LIFETIME_EXCEEDED
//
// MessageText:
//
// The Active Directory cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.
// WinSock error codes are also defined in WinSock.h
// and WinSock2.h, hence the IFDEF
//
#ifndef WSABASEERR
#define WSABASEERR 10000
//
// MessageId: WSAEINTR
//
// MessageText:
//
// A blocking operation was interrupted by a call to WSACancelBlockingCall.
//
#define WSAEINTR 10004L
//
// MessageId: WSAEBADF
//
// MessageText:
//
// The file handle supplied is not valid.
//
#define WSAEBADF 10009L
//
// MessageId: WSAEACCES
//
// MessageText:
//
// An attempt was made to access a socket in a way forbidden by its access permissions.
//
#define WSAEACCES 10013L
//
// MessageId: WSAEFAULT
//
// MessageText:
//
// The system detected an invalid pointer address in attempting to use a pointer argument in a call.
//
#define WSAEFAULT 10014L
//
// MessageId: WSAEINVAL
//
// MessageText:
//
// An invalid argument was supplied.
//
#define WSAEINVAL 10022L
//
// MessageId: WSAEMFILE
//
// MessageText:
//
// Too many open sockets.
//
#define WSAEMFILE 10024L
//
// MessageId: WSAEWOULDBLOCK
//
// MessageText:
//
// A non-blocking socket operation could not be completed immediately.
//
#define WSAEWOULDBLOCK 10035L
//
// MessageId: WSAEINPROGRESS
//
// MessageText:
//
// A blocking operation is currently executing.
//
#define WSAEINPROGRESS 10036L
//
// MessageId: WSAEALREADY
//
// MessageText:
//
// An operation was attempted on a non-blocking socket that already had an operation in progress.
//
#define WSAEALREADY 10037L
//
// MessageId: WSAENOTSOCK
//
// MessageText:
//
// An operation was attempted on something that is not a socket.
//
#define WSAENOTSOCK 10038L
//
// MessageId: WSAEDESTADDRREQ
//
// MessageText:
//
// A required address was omitted from an operation on a socket.
//
#define WSAEDESTADDRREQ 10039L
//
// MessageId: WSAEMSGSIZE
//
// MessageText:
//
// A message sent on a datagram socket was larger than the internal message buffer or some other network limit, or the buffer used to receive a datagram into was smaller than the datagram itself.
//
#define WSAEMSGSIZE 10040L
//
// MessageId: WSAEPROTOTYPE
//
// MessageText:
//
// A protocol was specified in the socket function call that does not support the semantics of the socket type requested.
//
#define WSAEPROTOTYPE 10041L
//
// MessageId: WSAENOPROTOOPT
//
// MessageText:
//
// An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.
//
#define WSAENOPROTOOPT 10042L
//
// MessageId: WSAEPROTONOSUPPORT
//
// MessageText:
//
// The requested protocol has not been configured into the system, or no implementation for it exists.
//
#define WSAEPROTONOSUPPORT 10043L
//
// MessageId: WSAESOCKTNOSUPPORT
//
// MessageText:
//
// The support for the specified socket type does not exist in this address family.
//
#define WSAESOCKTNOSUPPORT 10044L
//
// MessageId: WSAEOPNOTSUPP
//
// MessageText:
//
// The attempted operation is not supported for the type of object referenced.
//
#define WSAEOPNOTSUPP 10045L
//
// MessageId: WSAEPFNOSUPPORT
//
// MessageText:
//
// The protocol family has not been configured into the system or no implementation for it exists.
//
#define WSAEPFNOSUPPORT 10046L
//
// MessageId: WSAEAFNOSUPPORT
//
// MessageText:
//
// An address incompatible with the requested protocol was used.
//
#define WSAEAFNOSUPPORT 10047L
//
// MessageId: WSAEADDRINUSE
//
// MessageText:
//
// Only one usage of each socket address (protocol/network address/port) is normally permitted.
//
#define WSAEADDRINUSE 10048L
//
// MessageId: WSAEADDRNOTAVAIL
//
// MessageText:
//
// The requested address is not valid in its context.
//
#define WSAEADDRNOTAVAIL 10049L
//
// MessageId: WSAENETDOWN
//
// MessageText:
//
// A socket operation encountered a dead network.
//
#define WSAENETDOWN 10050L
//
// MessageId: WSAENETUNREACH
//
// MessageText:
//
// A socket operation was attempted to an unreachable network.
//
#define WSAENETUNREACH 10051L
//
// MessageId: WSAENETRESET
//
// MessageText:
//
// The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.
//
#define WSAENETRESET 10052L
//
// MessageId: WSAECONNABORTED
//
// MessageText:
//
// An established connection was aborted by the software in your host machine.
//
#define WSAECONNABORTED 10053L
//
// MessageId: WSAECONNRESET
//
// MessageText:
//
// An existing connection was forcibly closed by the remote host.
//
#define WSAECONNRESET 10054L
//
// MessageId: WSAENOBUFS
//
// MessageText:
//
// An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
//
#define WSAENOBUFS 10055L
//
// MessageId: WSAEISCONN
//
// MessageText:
//
// A connect request was made on an already connected socket.
//
#define WSAEISCONN 10056L
//
// MessageId: WSAENOTCONN
//
// MessageText:
//
// A request to send or receive data was disallowed because the socket is not connected and (when sending on a datagram socket using a sendto call) no address was supplied.
//
#define WSAENOTCONN 10057L
//
// MessageId: WSAESHUTDOWN
//
// MessageText:
//
// A request to send or receive data was disallowed because the socket had already been shut down in that direction with a previous shutdown call.
//
#define WSAESHUTDOWN 10058L
//
// MessageId: WSAETOOMANYREFS
//
// MessageText:
//
// Too many references to some kernel object.
//
#define WSAETOOMANYREFS 10059L
//
// MessageId: WSAETIMEDOUT
//
// MessageText:
//
// A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
//
#define WSAETIMEDOUT 10060L
//
// MessageId: WSAECONNREFUSED
//
// MessageText:
//
// No connection could be made because the target machine actively refused it.
//
#define WSAECONNREFUSED 10061L
//
// MessageId: WSAELOOP
//
// MessageText:
//
// Cannot translate name.
//
#define WSAELOOP 10062L
//
// MessageId: WSAENAMETOOLONG
//
// MessageText:
//
// Name component or name was too long.
//
#define WSAENAMETOOLONG 10063L
//
// MessageId: WSAEHOSTDOWN
//
// MessageText:
//
// A socket operation failed because the destination host was down.
//
#define WSAEHOSTDOWN 10064L
//
// MessageId: WSAEHOSTUNREACH
//
// MessageText:
//
// A socket operation was attempted to an unreachable host.
//
#define WSAEHOSTUNREACH 10065L
//
// MessageId: WSAENOTEMPTY
//
// MessageText:
//
// Cannot remove a directory that is not empty.
//
#define WSAENOTEMPTY 10066L
//
// MessageId: WSAEPROCLIM
//
// MessageText:
//
// A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously.
//
#define WSAEPROCLIM 10067L
//
// MessageId: WSAEUSERS
//
// MessageText:
//
// Ran out of quota.
//
#define WSAEUSERS 10068L
//
// MessageId: WSAEDQUOT
//
// MessageText:
//
// Ran out of disk quota.
//
#define WSAEDQUOT 10069L
//
// MessageId: WSAESTALE
//
// MessageText:
//
// File handle reference is no longer available.
//
#define WSAESTALE 10070L
//
// MessageId: WSAEREMOTE
//
// MessageText:
//
// Item is not available locally.
//
#define WSAEREMOTE 10071L
//
// MessageId: WSASYSNOTREADY
//
// MessageText:
//
// WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.
//
#define WSASYSNOTREADY 10091L
//
// MessageId: WSAVERNOTSUPPORTED
//
// MessageText:
//
// The Windows Sockets version requested is not supported.
//
#define WSAVERNOTSUPPORTED 10092L
//
// MessageId: WSANOTINITIALISED
//
// MessageText:
//
// Either the application has not called WSAStartup, or WSAStartup failed.
//
#define WSANOTINITIALISED 10093L
//
// MessageId: WSAEDISCON
//
// MessageText:
//
// Returned by WSARecv or WSARecvFrom to indicate the remote party has initiated a graceful shutdown sequence.
//
#define WSAEDISCON 10101L
//
// MessageId: WSAENOMORE
//
// MessageText:
//
// No more results can be returned by WSALookupServiceNext.
//
#define WSAENOMORE 10102L
//
// MessageId: WSAECANCELLED
//
// MessageText:
//
// A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
//
#define WSAECANCELLED 10103L
//
// MessageId: WSAEINVALIDPROCTABLE
//
// MessageText:
//
// The procedure call table is invalid.
//
#define WSAEINVALIDPROCTABLE 10104L
//
// MessageId: WSAEINVALIDPROVIDER
//
// MessageText:
//
// The requested service provider is invalid.
//
#define WSAEINVALIDPROVIDER 10105L
//
// MessageId: WSAEPROVIDERFAILEDINIT
//
// MessageText:
//
// The requested service provider could not be loaded or initialized.
//
#define WSAEPROVIDERFAILEDINIT 10106L
//
// MessageId: WSASYSCALLFAILURE
//
// MessageText:
//
// A system call that should never fail has failed.
//
#define WSASYSCALLFAILURE 10107L
//
// MessageId: WSASERVICE_NOT_FOUND
//
// MessageText:
//
// No such service is known. The service cannot be found in the specified name space.
//
#define WSASERVICE_NOT_FOUND 10108L
//
// MessageId: WSATYPE_NOT_FOUND
//
// MessageText:
//
// The specified class was not found.
//
#define WSATYPE_NOT_FOUND 10109L
//
// MessageId: WSA_E_NO_MORE
//
// MessageText:
//
// No more results can be returned by WSALookupServiceNext.
//
#define WSA_E_NO_MORE 10110L
//
// MessageId: WSA_E_CANCELLED
//
// MessageText:
//
// A call to WSALookupServiceEnd was made while this call was still processing. The call has been canceled.
//
#define WSA_E_CANCELLED 10111L
//
// MessageId: WSAEREFUSED
//
// MessageText:
//
// A database query failed because it was actively refused.
//
#define WSAEREFUSED 10112L
//
// MessageId: WSAHOST_NOT_FOUND
//
// MessageText:
//
// No such host is known.
//
#define WSAHOST_NOT_FOUND 11001L
//
// MessageId: WSATRY_AGAIN
//
// MessageText:
//
// This is usually a temporary error during hostname resolution and means that the local server did not receive a response from an authoritative server.
//
#define WSATRY_AGAIN 11002L
//
// MessageId: WSANO_RECOVERY
//
// MessageText:
//
// A non-recoverable error occurred during a database lookup.
//
#define WSANO_RECOVERY 11003L
//
// MessageId: WSANO_DATA
//
// MessageText:
//
// The requested name is valid, but no data of the requested type was found.
//
#define WSANO_DATA 11004L
//
// MessageId: WSA_QOS_RECEIVERS
//
// MessageText:
//
// At least one reserve has arrived.
//
#define WSA_QOS_RECEIVERS 11005L
//
// MessageId: WSA_QOS_SENDERS
//
// MessageText:
//
// At least one path has arrived.
//
#define WSA_QOS_SENDERS 11006L
//
// MessageId: WSA_QOS_NO_SENDERS
//
// MessageText:
//
// There are no senders.
//
#define WSA_QOS_NO_SENDERS 11007L
//
// MessageId: WSA_QOS_NO_RECEIVERS
//
// MessageText:
//
// There are no receivers.
//
#define WSA_QOS_NO_RECEIVERS 11008L
//
// MessageId: WSA_QOS_REQUEST_CONFIRMED
//
// MessageText:
//
// Reserve has been confirmed.
//
#define WSA_QOS_REQUEST_CONFIRMED 11009L
//
// MessageId: WSA_QOS_ADMISSION_FAILURE
//
// MessageText:
//
// Error due to lack of resources.
//
#define WSA_QOS_ADMISSION_FAILURE 11010L
//
// MessageId: WSA_QOS_POLICY_FAILURE
//
// MessageText:
//
// Rejected for administrative reasons - bad credentials.
//
#define WSA_QOS_POLICY_FAILURE 11011L
//
// MessageId: WSA_QOS_BAD_STYLE
//
// MessageText:
//
// Unknown or conflicting style.
//
#define WSA_QOS_BAD_STYLE 11012L
//
// MessageId: WSA_QOS_BAD_OBJECT
//
// MessageText:
//
// Problem with some part of the filterspec or providerspecific buffer in general.
//
#define WSA_QOS_BAD_OBJECT 11013L
//
// MessageId: WSA_QOS_TRAFFIC_CTRL_ERROR
//
// MessageText:
//
// Problem with some part of the flowspec.
//
#define WSA_QOS_TRAFFIC_CTRL_ERROR 11014L
//
// MessageId: WSA_QOS_GENERIC_ERROR
//
// MessageText:
//
// General QOS error.
//
#define WSA_QOS_GENERIC_ERROR 11015L
//
// MessageId: WSA_QOS_ESERVICETYPE
//
// MessageText:
//
// An invalid or unrecognized service type was found in the flowspec.
//
#define WSA_QOS_ESERVICETYPE 11016L
//
// MessageId: WSA_QOS_EFLOWSPEC
//
// MessageText:
//
// An invalid or inconsistent flowspec was found in the QOS structure.
//
#define WSA_QOS_EFLOWSPEC 11017L
//
// MessageId: WSA_QOS_EPROVSPECBUF
//
// MessageText:
//
// Invalid QOS provider-specific buffer.
//
#define WSA_QOS_EPROVSPECBUF 11018L
//
// MessageId: WSA_QOS_EFILTERSTYLE
//
// MessageText:
//
// An invalid QOS filter style was used.
//
#define WSA_QOS_EFILTERSTYLE 11019L
//
// MessageId: WSA_QOS_EFILTERTYPE
//
// MessageText:
//
// An invalid QOS filter type was used.
//
#define WSA_QOS_EFILTERTYPE 11020L
//
// MessageId: WSA_QOS_EFILTERCOUNT
//
// MessageText:
//
// An incorrect number of QOS FILTERSPECs were specified in the FLOWDESCRIPTOR.
//
#define WSA_QOS_EFILTERCOUNT 11021L
//
// MessageId: WSA_QOS_EOBJLENGTH
//
// MessageText:
//
// An object with an invalid ObjectLength field was specified in the QOS provider-specific buffer.
//
#define WSA_QOS_EOBJLENGTH 11022L
//
// MessageId: WSA_QOS_EFLOWCOUNT
//
// MessageText:
//
// An incorrect number of flow descriptors was specified in the QOS structure.
//
#define WSA_QOS_EFLOWCOUNT 11023L
//
// MessageId: WSA_QOS_EUNKOWNPSOBJ
//
// MessageText:
//
// An unrecognized object was found in the QOS provider-specific buffer.
//
#define WSA_QOS_EUNKOWNPSOBJ 11024L
//
// MessageId: WSA_QOS_EPOLICYOBJ
//
// MessageText:
//
// An invalid policy object was found in the QOS provider-specific buffer.
//
#define WSA_QOS_EPOLICYOBJ 11025L
//
// MessageId: WSA_QOS_EFLOWDESC
//
// MessageText:
//
// An invalid QOS flow descriptor was found in the flow descriptor list.
//
#define WSA_QOS_EFLOWDESC 11026L
//
// MessageId: WSA_QOS_EPSFLOWSPEC
//
// MessageText:
//
// An invalid or inconsistent flowspec was found in the QOS provider specific buffer.
//
#define WSA_QOS_EPSFLOWSPEC 11027L
//
// MessageId: WSA_QOS_EPSFILTERSPEC
//
// MessageText:
//
// An invalid FILTERSPEC was found in the QOS provider-specific buffer.
//
#define WSA_QOS_EPSFILTERSPEC 11028L
//
// MessageId: WSA_QOS_ESDMODEOBJ
//
// MessageText:
//
// An invalid shape discard mode object was found in the QOS provider specific buffer.
//
#define WSA_QOS_ESDMODEOBJ 11029L
//
// MessageId: WSA_QOS_ESHAPERATEOBJ
//
// MessageText:
//
// An invalid shaping rate object was found in the QOS provider-specific buffer.
//
#define WSA_QOS_ESHAPERATEOBJ 11030L
//
// MessageId: WSA_QOS_RESERVED_PETYPE
//
// MessageText:
//
// A reserved policy element was found in the QOS provider-specific buffer.
// Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs.
//
#define ERROR_SXS_DUPLICATE_CLSID 14023L
//
// MessageId: ERROR_SXS_DUPLICATE_IID
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs.
//
#define ERROR_SXS_DUPLICATE_IID 14024L
//
// MessageId: ERROR_SXS_DUPLICATE_TLBID
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs.
//
#define ERROR_SXS_DUPLICATE_TLBID 14025L
//
// MessageId: ERROR_SXS_DUPLICATE_PROGID
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs.
//
#define ERROR_SXS_DUPLICATE_PROGID 14026L
//
// MessageId: ERROR_SXS_DUPLICATE_ASSEMBLY_NAME
//
// MessageText:
//
// Two or more components referenced directly or indirectly by the application manifest are different versions of the same component which is not permitted.
//
#define ERROR_SXS_DUPLICATE_ASSEMBLY_NAME 14027L
//
// MessageId: ERROR_SXS_FILE_HASH_MISMATCH
//
// MessageText:
//
// A component's file does not match the verification information present in the
// component manifest.
//
#define ERROR_SXS_FILE_HASH_MISMATCH 14028L
//
// MessageId: ERROR_SXS_POLICY_PARSE_ERROR
//
// MessageText:
//
// The policy manifest contains one or more syntax errors.
//
#define ERROR_SXS_POLICY_PARSE_ERROR 14029L
//
// MessageId: ERROR_SXS_XML_E_MISSINGQUOTE
//
// MessageText:
//
// Manifest Parse Error : A string literal was expected, but no opening quote character was found.
//
#define ERROR_SXS_XML_E_MISSINGQUOTE 14030L
//
// MessageId: ERROR_SXS_XML_E_COMMENTSYNTAX
//
// MessageText:
//
// Manifest Parse Error : Incorrect syntax was used in a comment.
//
#define ERROR_SXS_XML_E_COMMENTSYNTAX 14031L
//
// MessageId: ERROR_SXS_XML_E_BADSTARTNAMECHAR
//
// MessageText:
//
// Manifest Parse Error : A name was started with an invalid character.
//
#define ERROR_SXS_XML_E_BADSTARTNAMECHAR 14032L
//
// MessageId: ERROR_SXS_XML_E_BADNAMECHAR
//
// MessageText:
//
// Manifest Parse Error : A name contained an invalid character.
//
#define ERROR_SXS_XML_E_BADNAMECHAR 14033L
//
// MessageId: ERROR_SXS_XML_E_BADCHARINSTRING
//
// MessageText:
//
// Manifest Parse Error : A string literal contained an invalid character.
//
#define ERROR_SXS_XML_E_BADCHARINSTRING 14034L
//
// MessageId: ERROR_SXS_XML_E_XMLDECLSYNTAX
//
// MessageText:
//
// Manifest Parse Error : Invalid syntax for an xml declaration.
//
#define ERROR_SXS_XML_E_XMLDECLSYNTAX 14035L
//
// MessageId: ERROR_SXS_XML_E_BADCHARDATA
//
// MessageText:
//
// Manifest Parse Error : An Invalid character was found in text content.
//
#define ERROR_SXS_XML_E_BADCHARDATA 14036L
//
// MessageId: ERROR_SXS_XML_E_MISSINGWHITESPACE
//
// MessageText:
//
// Manifest Parse Error : Required white space was missing.
//
#define ERROR_SXS_XML_E_MISSINGWHITESPACE 14037L
//
// MessageId: ERROR_SXS_XML_E_EXPECTINGTAGEND
//
// MessageText:
//
// Manifest Parse Error : The character '>' was expected.
//
#define ERROR_SXS_XML_E_EXPECTINGTAGEND 14038L
//
// MessageId: ERROR_SXS_XML_E_MISSINGSEMICOLON
//
// MessageText:
//
// Manifest Parse Error : A semi colon character was expected.
// Certification Revocation check of peer's certificate failed
//
#define ERROR_IPSEC_IKE_PEER_CRL_FAILED 13848L
//
// MessageId: ERROR_IPSEC_IKE_POLICY_CHANGE
//
// MessageText:
//
// New policy invalidated SAs formed with old policy
//
#define ERROR_IPSEC_IKE_POLICY_CHANGE 13849L
//
// MessageId: ERROR_IPSEC_IKE_NO_MM_POLICY
//
// MessageText:
//
// There is no available Main Mode IKE policy.
//
#define ERROR_IPSEC_IKE_NO_MM_POLICY 13850L
//
// MessageId: ERROR_IPSEC_IKE_NOTCBPRIV
//
// MessageText:
//
// Failed to enabled TCB privilege.
//
#define ERROR_IPSEC_IKE_NOTCBPRIV 13851L
//
// MessageId: ERROR_IPSEC_IKE_SECLOADFAIL
//
// MessageText:
//
// Failed to load SECURITY.DLL.
//
#define ERROR_IPSEC_IKE_SECLOADFAIL 13852L
//
// MessageId: ERROR_IPSEC_IKE_FAILSSPINIT
//
// MessageText:
//
// Failed to obtain security function table dispatch address from SSPI.
//
#define ERROR_IPSEC_IKE_FAILSSPINIT 13853L
//
// MessageId: ERROR_IPSEC_IKE_FAILQUERYSSP
//
// MessageText:
//
// Failed to query Kerberos package to obtain max token size.
//
#define ERROR_IPSEC_IKE_FAILQUERYSSP 13854L
//
// MessageId: ERROR_IPSEC_IKE_SRVACQFAIL
//
// MessageText:
//
// Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup.
//
#define ERROR_IPSEC_IKE_SRVACQFAIL 13855L
//
// MessageId: ERROR_IPSEC_IKE_SRVQUERYCRED
//
// MessageText:
//
// Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes).
//
#define ERROR_IPSEC_IKE_SRVQUERYCRED 13856L
//
// MessageId: ERROR_IPSEC_IKE_GETSPIFAIL
//
// MessageText:
//
// Failed to obtain new SPI for the inbound SA from Ipsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.
// Failed to add Security Association to IPSec Driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine.
// The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.
// The requested semantics of retention of isolation across retaining commit and abort boundaries cannot be supported by this transaction implementation, or isoFlags was not equal to zero.
// The transaction was successfully aborted. However, this is a coordinated transaction, and some number of enlisted resources were aborted outright because they could not support abort-retaining semantics
// The sink is for the moment and wishes the transaction to proceed, but if other changes are made following this return by other event sinks then this sink wants another chance to look
// The TxIsolation Level property for the COM+ component being created is stronger than the TxIsolationLevel for the "root" component for the transaction. The creation failed.
// No security packages are installed on this machine or the user is not logged on or there are no compatible security packages between the client and server.
// The requested operation cannot be completed. The computer must be trusted for delegation and the current user account must be configured to allow delegation.
// The dwValueType for the CERT_NAME_VALUE is not one of the character strings. Most likely it is either a CERT_RDN_ENCODED_BLOB or CERT_TDN_OCTED_STRING.
// The Put operation can not continue. The file needs to be resized. However, there is already a signature present. A complete signing operation must be done.
// An attempt was made to open a Certification Authority database session, but there are already too many active sessions. The server may need to be configured to allow additional sessions.
// The contacted domain controller cannot support signed LDAP traffic. Update the domain controller or configure Certificate Services to use SSL for Active Directory access.
// The request was made on behalf of a subject other than the caller. The certificate template must be configured to require at least one signature to authorize the request.
// The certificate template renewal period is longer than the certificate validity period. The template should be reconfigured or the CA certificate renewed.
