singrdk/base/Applications/WebApps/SPECweb99/rc.sing

###############################################################################
#                                                                             #
#                    Test parameters for SPECweb99                            #
#                                                                             #
###############################################################################

###############################################################################
#
# Changeable Benchmark Configuration Parameters
#
###############################################################################

# SIMULTANEOUS_CONNECTIONS sets the number of load generators for the
# tests to be run.  You may specify one value or a list of values.
# manager will run a separate test for each value in the list.  During
# each test, N measurements will be taken, where N is the value assigned
# to ITERATIONS.  If you use a list, each value results in a separate
# test with its own output files, unless ITERATIONS=1.  When
# ITERATIONS=1, all the values in SIMULTANEOUS_CONNECTIONS get reported
# in a single set of output files.  This is for testing and tuning
# purposes only.  For reporting purposes ITERATIONS must be set to 3.
# The form <first>-<last>x<increment> can be used to run a series of
# tests starting at <first>, ending at <last> and incrementing by
# <increment>.

SIMULTANEOUS_CONNECTIONS="10"
#SIMULTANEOUS_CONNECTIONS="5-65x15"
#SIMULTANEOUS_CONNECTIONS="10-100x10 85 95 98"

# CLIENTS: client-name(port)[speed]{servername}
# SERVER: server-name as seen by the prime-client

# You may use multiple network adapters in a client by specifying that client
# multiple times with different {servername} settings and using the
# @@SERVER@@ form of URL_ROOT. For example:
# 	CLIENTS=box1{sut-fddi1} box1{sut-fddi2}
# The speed setting gives relative speed of each
# client and the port setting is the port through which the prime-client
# communicates with that client. For example: 
# 	CLIENTS=client1[2] client2(2223)
# client1 is twice as fast as client2, client2 will open port 2223 to
# receive its messages from the prime client.

CLIENTS=localhost
SERVER=172.31.43.73

# URL_ROOT is the URL for the directory that contains "file_set". For
# example, if your file_set directory is in the web-server root then use
# "URL_ROOT=http://server1" (where server1 is the name of your web
# server).  If you built the file_set in a directory named "specweb99"
# then use "URL_ROOT=http://server1/specweb99". To use multi-adapter
# clients use: URL_ROOT=http://@@SERVER@@/specweb99

URL_ROOT=http://172.31.43.73/fs


# DYNAMIC_ROOT or DYN_GET_SCRIPT, DYN_CAD_SCRIPT, DYN_POST_SCRIPT, 
#         DYN_CMD_SCRIPT
# The URL of the dynamic program(s) (e.g. CGI executable, ISAPI
# module, NSAPI module, etc).  If your file_set directory is not in the
# web-server root then add a question mark and the URL to the directory
# that contains file_set.
# 
# For example, if file_set is in a directory
# named "specweb99" then you would use
# "DYNAMIC_ROOT=http://server1/cgi-bin/specweb99-cgi.pl?/specweb99".
# 
# You may also use separate URL's for each class of DYNAMIC operation
# supported: POST, standard dynamic GET, custom ad rotation (CAD) GET
# and Commands (fetch, reset).  You may set any or all of the 4 separate
# variables.  The unset variables will default to DYNAMIC_ROOT.
#

DYNAMIC_ROOT=http://172.31.43.73/spec/cgi-bin/specweb99-cgi.pl

DYN_GET_SCRIPT=http://172.31.43.73/dynamic-content
DYN_CAD_SCRIPT=http://172.31.43.73/dynamic-content
DYN_POST_SCRIPT=http://172.31.43.73/dynamic-content
DYN_CMD_SCRIPT=http://172.31.43.73/dynamic-content


# You must specify the URL for DYN_CGI_SCRIPT that is a CGI-based
# implementation of the standard dynamic GET.  This will not default to
# DYNAMIC_ROOT.

DYN_CGI_SCRIPT=http://172.31.43.73/spec/cgi-bin/specweb99-cgi.pl

# HTTP_PROTOCOL is used to specify HTTP version 1.0 or 1.1.  If you
# leave this commented out then <I>manager</I> makes a connection to
# your web server to determine what version of the protocol to use.  You
# can set the HTTP_PROTOCOL variable in order to force SPECweb99 to use
# a particular version of HTTP.  The valid settings are "HTTP/1.0" or
# "HTTP/1.1".

#HTTP_PROTOCOL="HTTP/1.1"
#HTTP_PROTOCOL="HTTP/1.0"

# WARMUP_TIME is the amount of time in seconds to run to get to steady
# state prior to the 1st measurement in the test.  This time is intended
# to warm up any caches before taking a measurement.  The minimum legal
# value is 1200 seconds.

WARMUP_TIME=60

# WAIT_TO_BEGIN is the time to sleep in seconds before starting each
# iteration. This delay is taken after the prime client tells the
# clients about the workload and before telling them to start working.
# If test startup isn't synchronizing properly, this might need to be
# increased.

WAIT_TO_BEGIN=5

# All outputs get put in ./results/<OUTPUT_NAME>.nnn.xxx where nnn is an
# ascending test number and xxx is the output format type (i.e. raw, ps,
# pdf, asc, html).

OUTPUT_NAME="output"


###############################################################################
#
# Configuration Description - set these parameters to describe the test.
# These settings will show up in the reports
#
###############################################################################


#Server Hardware

hw_vendor="Some Texas Company"
hw_model="Kowabunga 2000"
hw_cpu="60 Hz PDP-11"
hw_ncpu=13
hw_pcache="16KBI+16KBD on chip"
hw_scache="1MB(I+D) off chip"
hw_ocache="16MB(I+D) off chip per CPU pair"
hw_memory="7 GB"
hw_disk="3 CDRW, 10 9GB SCSI AB-CD01 "
hw_controllers="1 IDE KURU-2000"
hw_other="1 Everready Bunny"

#Availability Dates

hw_avail="Dec-1999"
http_avail="Jan-2000"
os_avail="Jun-1997"
software_avail="Jan-2001"

#HTTP Software

sw_vendor="Software House of Horrors"
sw_http="WebServer 12.0"
sw_api="Fast CGI"
http_cache="WebSpeedup 0.12"
http_logmode="Uncommon Log Format"

#Other Software

sw_os="MS-DOS 2.1"
sw_file="NFS"
sw_other="Quake II"


#Test Sponsor

test_date="Dec-1901"
tester_name="Some Texas Company"
license_num=-1

#Network

net_nctrls=100
net_controller="3 Proteon ISA Microbit & 97 MultiCom Ethernet"
net_nnets=100
net_net="3 Microbit & 97 Ethernet"
net_speed="1Mb/s & 10Mb/s"
msl=30
time_wait=60
net_mtu=1500

#Clients (i.e. Load Generators)

#lg_num=This field is derived from the client list
lg_model="PackardBell 286i"
lg_cpu="1.28Mhz 8088+"
lg_ncpu=1
lg_memory="64KB"
lg_netctrlr="Hayes Internal"
lg_os="Disk O.S."
lg_compiler="TurboPascal"


#Notes
# any of the notes can be multi-line by using the nnn suffix

notes_sut000="I overclocked this machine"
notes_sut001="I learned how to do it on the Internet"
notes_os000="Tuning parameters:"
notes_os001="  superboost=1"
notes_os002="  megacache_size=9009009009"
notes_http=
notes_api=
notes_software=
notes_hardware=
notes_net=
notes_client=
notes="I'd like to teach the world to sing"


###############################################################################
#
# Benchmark Constants - any change to these will lead to an invalid result
#
###############################################################################
#
#  you cannot change these without invalidating benchmark results
#

#
#

# "warmup" time before 2nd through nth iteration of the test 
RAMPUP_TIME="300"

# measurement time for each iteration (default = 1200)</DD>
RUN_TIME="60"

# time after each iteration of the test (default = 300)</DD>
RAMPDOWN_TIME="300"

# number of times to repeat the measurement (default = 3)</DD>
ITERATIONS=1

#
# Mix parameters - control the percentage of requests of each type.  Set
#    values between 0 and 1.
#


# Percent of overall dynamic requests (default = 0.3 for 30% dynamic requests)

DYNAMIC_CONTENT=0

# Percent of dynamic requests that are posts (default = 0.16).

DYNAMIC_POST=0

# Percent of dynamic requests that are Custom Ad Rotation GETS (default = .42)

DYNAMIC_CAD_GET=0

# Percent of dynamic requests that are  GETs calling the CGI code 
# (default = .005)

DYNAMIC_CGI_GET=0

# Number of files each in each class

MAX_FILE=8

# Emulation of user dialup line. SPEED in bits/sec.
# Target line speed to emulate in bits/second (default = 400000)</DD>

USER_LINE_SPEED=400000

# Speed in bits/second below which a connection is deemed too slow.  For
# a valid test, 95% of the connections must operate faster than the
# USER_SPEED_LIMIT (default = 320000)

USER_SPEED_LIMIT=320000

# REQUESTS_PER_KEEP_ALIVE is the average number of HTTP requests to do
# per "keep-alive" HTTP connection.  For example, if a connection
# randomly selects 5 requests to keep alive it will open a connection to
# the web server, request a page, read the server response, do this
# request+read 4 more times, and then close the socket connection.  Each
# of the 5 GETs on that socket will be for different URLs. (default =
# 10)

REQUESTS_PER_KEEP_ALIVE=10

# PERCENT_KEEP_ALIVE_REQUETS is the percentage of GETs that to retrieve
# via "keep-alive" connections.  Note that this is NOT the percentage of
# connections that will have the keep-alive header. (default = 0.7)

PERCENT_KEEP_ALIVE_REQUESTS=0.7

# Set ABORTIVE_CLOSE to 0 or 1 to indicate whether or not to use
# abortive closes.  (default = 0)

ABORTIVE_CLOSE=0